検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 100 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Mechanical properties of base metal and heat-affected zone in friction-stir-welded AA6061-T6 at ultra-low temperature of 20 K

Nguyen, T.-D.*; Singh, C.*; Kim, Y. S.*; Han, J. H. *; Lee, D.-H.*; Lee, K.*; Harjo, S.; Lee, S. Y.*

Journal of Materials Research and Technology, 31, p.1547 - 1556, 2024/07

 被引用回数:0 パーセンタイル:0.00(Materials Science, Multidisciplinary)

This study investigates the mechanical properties of a friction-stir-welded (FSW) AA6061-T6 aluminum alloy at ultra-low temperature (ULT) of 20 K. In-situ neutron diffraction and orientation imaging microscopy were employed to compare the tensile deformation behavior of the base metal (BM) and heat-affected zone (HAZ) in the FSW aluminum plate. The results demonstrate that compared to room-temperature (RT), ULT induces a significant improvement in tensile strength and ductility in both the BM and HAZ. The enhanced mechanical properties in BM at ULT result from a more homogeneous deformation than occurs at RT. On the other hand, HAZ at ULT exhibits an even lower yield strength than at RT, but the strain hardening rate (SHR) is the most significant among the alloys, leading to a tensile strength of 346 MPa and the highest ductility of 46.8%. The lowest yield strength corresponds to the lowest-hardness zones in HAZ, caused by dissolved/coarsened precipitates during the FSW process.

論文

Morphology evolution of $$beta$$-phase in Al-Mg-Si alloys during aging treatment

Ahmed, A.*; Uttarasak, K.*; 土屋 大樹*; Lee, S.*; 西村 克彦*; 布村 紀男*; 清水 一行*; 平山 恭介*; 戸田 裕之*; 山口 正剛; et al.

Journal of Alloys and Compounds, 988, p.174234_1 - 174234_9, 2024/06

 被引用回数:7 パーセンタイル:89.03(Chemistry, Physical)

本研究は、Al-Mg-Si合金における$$beta$$相の成長過程を形態進化の観点から明らかにすることを目的とする。本研究では、高分解能透過電子顕微鏡(HR-TEM)、集束イオンビーム(FIB)及び光学顕微鏡(OM)を用いて、$$beta$$相の配向関係、形状、成長過程、ミスフィット値、及び$$beta$$相とAlマトリックスとの界面状態を調べた。その結果、$$beta$$相の端に$$beta$$ファセットが確認され、$$beta$$相の新しい3次元形状が2つ提案された。我々は、Mg$$_2$$Si結晶の成長過程における形態変化を説明するためにミスフィットを計算し、不安定な{111}$$beta$$ファセットが(001)$$beta$$ファセットや(011)$$beta$$ファセットと比較して高いミスフィット値を持つことを解明した。これは、Al-Mg-Si合金の微細構造変化を予測し、所望の特性を持つ材料を設計するために重要な知見である。

論文

In-situ neutron diffraction study of serration-involved ultra-cryogenic deformation behavior at 15 K

Kim, Y. S.*; Chae, H.*; Lee, D.-Y.*; Han, J. H. *; Hong, S.-K.*; Na, Y. S.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Lee, S.-Y.*

Materials Science & Engineering A, 899, p.146453_1 - 146453_7, 2024/05

 被引用回数:1 パーセンタイル:63.56(Nanoscience & Nanotechnology)

This work focused on the mechanical properties and serration-involved deformation behavior of advanced alloys at 15 K. Evolution of stacking faults and $$varepsilon$$-martensite improved the mechanical performance of CoCrNi alloys, and significant strain-induced martensite transformation of DED-SS316L led to superior strength and strain hardening. A magnitude in stress drop was governed by dislocation density, phase type, and lattice defects, irrespective of processing method. FCC {200} notably was influenced recovery behavior after stress drop, and the contribution of strain energy density by serration on tensile toughness was the greatest for HR-CoCrNi.

論文

OECD/NEA ARC-F Project; Summary of fission product transport

Lind, T.*; Kalilainen, J.*; Marchetto, C.*; Beck, S.*; 中村 康一*; 木野 千晶*; 丸山 結; 城戸 健太朗; Kim, S. I.*; Lee, Y.*; et al.

Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.4796 - 4809, 2023/08

The OECD/NEA ARC-F project was established to investigate the accidents at Fukushima Daiichi nuclear power station with the aim of consolidating the observations for deeper understanding of the severe accident progression and the status of reactors and containment vessels. Additionally, the project formed an information sharing framework in reactor safety between Japan and international experts. In order to achieve these objectives, the project focused on three tasks: i) to refine analysis for accident scenarios and associated fission-product transport and dispersion, ii) to compile and manage data on the Fukushima Daiichi NPS accident, and iii) to discuss future long-term projects relevant to the Fukushima Daiichi NPS accident. The work was carried out by 22 partners from 12 countries. In the fission product group, ten organizations worked on five topics which were ranked with a high significance as open issues based on the BSAF project and were thereby selected for further investigations. The five fission product related topics were: i) fission product speciation, ii) iodine chemistry, iii) pool scrubbing, iv) fission product transport and behavior in the buildings, and v) uncertainty analysis and variant calculations. In this paper, the work carried out to investigate these five fission product release and transport topics of special interest in the ARC-F project will be described and summarized.

論文

Magnon dynamics in a Skyrmion-textured domain wall of antiferromagnets

Lee, S.*; 仲田 光樹; Tchernyshyov, O.*; Kim, S. K.*

Physical Review B, 107(18), p.184432_1 - 184432_12, 2023/05

 被引用回数:9 パーセンタイル:84.51(Materials Science, Multidisciplinary)

超対称量子力学に基づき、反強磁性スカーミオン構造を有する磁壁中のマグノンのトポロジカル量子輸送物性を明らかにする。スカーミオン型の磁気構造を有する磁壁中を伝搬するマグノンは、一種のゲージ場として作用する有効磁場を獲得する。そこで、この有効磁場中でのマグノンの反射・屈折現象を超対称量子力学に基づいて解析し、その伝搬および束縛マグノン状態を明らかにする。そして、ラウダウアー公式を用いて、磁壁のカイラリティが増加するにつれてマグノンによる熱流が減少することを明らかにする。本研究はスピンホール効果を活用した熱流の制御方法を理論的に提案する。

論文

Magnon dynamics in a Skyrmion-textured domain wall of antiferromagnets

Lee, S.*; 仲田 光樹; Tchernyshyov, O.*; Kim, S. K.*

Proceedings of IEEE International Magnetics Conference 2023 (INTERMAG 2023) (Internet), 2 Pages, 2023/05

We theoretically investigate the interaction between magnons and a Skyrmion-textured domain wall in a two-dimensional antiferromagnet and elucidate the resultant properties of magnon transport by using supersymmetric quantum mechanics. Our results suggest that the thermal transport of an antiferromagnet is tunable by modulating the Skyrmion charge density of the domain wall, which might be useful for realizing electrically tunable spin caloritronic devices.

論文

Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy

Lam, T.-N.*; Chin, H.-H.*; Zhang, X.*; Feng, R.*; Wang, H.*; Chiang, C.-Y.*; Lee, S. Y.*; 川崎 卓郎; Harjo, S.; Liaw, P. K.*; et al.

Acta Materialia, 245, p.118585_1 - 118585_9, 2023/02

 被引用回数:20 パーセンタイル:88.45(Materials Science, Multidisciplinary)

The present study investigates the crystallographic-texture effects on the improved fatigue resistance in the CoCrFeMnNi high-entropy alloys (HEAs) with the full-size geometry of the ASTM Standards E647-99. We exploited X-ray nano-diffraction mapping to characterize the crystal-deformation levels ahead of the crack tip after stress unloading under both constant- and tensile overloaded-fatigue conditions. The crack-tip blunting-induced much higher deformation level was concentrated surrounding the crack-tip which delays the fatigue-crack growth immediately after a tensile overload. The predominant deformation texture orientation in the Paris regime was investigated, using electron backscatter diffraction and orientation distribution function analyses. The twinning formation-driven shear deformation gave rise to the development of the Goss-type texture within the plastic deformation regime under a tensile-overloaded-fatigue condition, which was attributed to enhance the crack deflection and thus the tensile induced crack-growth-retardation period in the CoCrFeMnNi HEA.

論文

Multiple deformation scheme in direct energy deposited CoCrNi medium entropy alloy at 210K

Kim, Y. S.*; Chae, H.*; Woo, W.*; Kim, D.-K.*; Lee, D.-H.*; Harjo, S.; 川崎 卓郎; Lee, S. Y.*

Materials Science & Engineering A, 828, p.142059_1 - 142059_10, 2021/11

 被引用回数:32 パーセンタイル:88.72(Nanoscience & Nanotechnology)

CoCrNi medium entropy alloy (MEA) and stainless steel 316L (SS316L) were manufactured by direct energy deposition of additive manufacturing (DED-AM). Exceptional mechanical properties of DED CoCrNi at 210K were achieved by the activities of a multiple deformation scheme that changed from dislocation slip to twinning-induced plasticity followed by transformation-induced plasticity. While SS316L at room temperature has micro-twins, CoCrNi at 210K exhibited nano-twins, resulting from lower stacking fault energy. Moreover, transformed hexagonal close-packed (HCP) phases were found near the face-centered cubic (FCC) {111} grain boundaries, where remarkable stacking faults and severe lattice distortion were measured.

論文

Development of delayed gamma-ray spectroscopy for nuclear safeguards, 2; Designing a compact DGS instrument

Rossi, F.; Abbas, K.*; 小泉 光生; Lee, H.-J.; Rodriguez, D.; 高橋 時音

Proceedings of INMM & ESARDA Joint Virtual Annual Meeting (Internet), 7 Pages, 2021/08

The Japan Atomic Energy Agency is developing the Delayed Gamma-ray Spectroscopy (DGS) non-destructive assay technique to quantify the fissile-nuclide content in small samples of mixed nuclear materials. One of our primary goals is to develop a compact and efficient DGS instrument to be easily installable into analytical laboratories. The instrument should include an external neutron source and a gamma-ray detection system along with other supporting systems like sample transfer and neutron monitoring. One of the challenges is to design a compact and efficient moderator for commercial neutron sources (e.g. neutron generators or sealed radioactive sources) that emit neutrons with high energy. However, to be able to enhance the gamma-ray signal from fissile materials, thermal neutrons are best due to their higher fission cross-sections. The choice of viable neutron source (neutron spectrum and strength) depends on several considerations (e.g. sample type and interrogation pattern), but also affect the gamma-ray measurement and the consequence analysis. In this work, we will first describe the evaluation results of our Delayed Gamma-ray Test Spectrometer using a $$^{252}$$Cf source (DGTS-C) from the first experiment carried out in PERLA in collaboration with the European Commission, Joint Research Centre. In association, we will describe how it provided guidance for our demonstration irradiator. Further, we will present our final moderator design concept for a deuterium-deuterium (D-D) neutron generator and present the latest results of data-model comparisons, including those with our PUNITA results. This work is supported by the Japanese Ministry of Education, Culture, Sports, Science, and Technology (MEXT) under the subsidy for the "promotion for strengthening nuclear security and the like". This work was done under the agreement between JAEA and EURATOM in the field of nuclear material safeguards research and development.

論文

Spin wave excitations in honeycomb antiferromagnet MnTiO$$_{3}$$

Hwang, I. Y.*; Lee, K. H.*; Chung, J.-H.*; 池内 和彦*; Garlea, V. O.*; 山内 宏樹; 赤津 光洋*; 社本 真一

Journal of the Physical Society of Japan, 90(6), p.064708_1 - 064708_6, 2021/06

 被引用回数:3 パーセンタイル:33.16(Physics, Multidisciplinary)

ハニカム格子反強磁性体MnTiO$$_{3}$$のスピン波を調べ、スピン間の交換相互作用を正確に求めた。

論文

Programmable synthesis of silver wheels

Kwon, H.*; Pietrasiak, E.*; 大原 高志; 中尾 朗子*; Chae, B.*; Hwang, C.-C.*; Jung, D.*; Hwang, I.-C.*; Ko, Y. H.*; Kim, K.*; et al.

Inorganic Chemistry, 60(9), p.6403 - 6409, 2021/05

 被引用回数:0 パーセンタイル:0.00(Chemistry, Inorganic & Nuclear)

The synthesis of sandwich-shaped multinuclear silver complexes with planar penta- and tetranuclear wheel-shaped silver units and a central anion is reported, along with complete spectroscopic and structural characterization. An NMR mechanistic study reveals that silver complexes were formed in the following order: 2Ag $$rightarrow$$ 3Ag$$^{rm H2O}$$ $$rightarrow$$ 5Ag$$^{rm OH}$$ $$rightarrow$$ 4Ag$$^{rm OH}$$. The central hydroxides in 4Ag$$^{rm OH}$$ and 5Ag$$^{rm OH}$$ exhibit exotic physical properties due to the confined environment inside the complex. The size of these silver wheels can be tuned by changing the central anion or extracting/adding one silver atom. This study provides the facile way to synthesize discrete wheel-shaped multinuclear silver complexes and provides valuable insights into the dynamics of the self-assembly process.

論文

Origin of magnetovolume effect in a cobaltite

Miao, P.*; Tan, Z.*; Lee, S. H.*; 石川 喜久*; 鳥居 周輝*; 米村 雅雄*; 幸田 章宏*; 小松 一生*; 町田 真一*; 佐野 亜沙美; et al.

Physical Review B, 103(9), p.094302_1 - 094302_18, 2021/03

 被引用回数:4 パーセンタイル:19.75(Materials Science, Multidisciplinary)

層状ペロブスカイトPrBaCo$$_{2}$$O$$_{5.5}$$は、熱膨張のない複合材料を作るために必要な負の熱膨張(NTE)を示す。NTEは、自発的な磁気秩序と密接に関連していることがわかっていた(磁気体積効果: MVE)。今回、われわれは、PrBaCo$$_{2}$$O$$_{5.5}$$の連続的な磁気体積効果が、本質的には不連続であり、大きな体積を持つ反強磁性絶縁体(AFILV)から、小さな体積をもつ強磁性卑絶縁体(FLISV)への磁気電気的相転移に起因することを明らかにした。また、磁気電気効果(ME)は、温度,キャリアドーピング,静水圧,磁場などの複数の外部刺激に対して高い感度を示した。これは、これまでよく知られている対称性の破れを伴う巨大磁気抵抗やマルチフェロイック効果などのMEとは対照的であり、輝コバルト鉱のMEは同一の結晶構造で起こる。われわれの発見は、MEとNTEを実現するための新しい方法を示しており、それは新しい技術に応用されるかもしれない。

論文

Dosimetric impact of a new computational voxel phantom series for the Japanese atomic bomb survivors; Methodological improvements and organ dose response functions

佐藤 達彦; 船本 幸代*; Paulbeck, C.*; Griffin, K.*; Lee, C.*; Cullings, H.*; Egbert, S. D.*; 遠藤 章; Hertel, N.*; Bolch, W. E.*

Radiation Research, 194(4), p.390 - 402, 2020/10

 被引用回数:6 パーセンタイル:39.65(Biology)

原爆生存者に対する被ばく線量評価は、幾何学形状人体ファントムと逆解きモンテカルロ放射線挙動解析計算コードを組み合わせて実施されており、その結果はDS02レポートにまとめられている。しかし、幾何学形状ファントムは、人体の詳細な解剖学的特性を表現しておらず、また、逆解きモンテカルロ計算手法はPHITSなど最新のモンテカルロ放射線挙動解析手法と比べて精度が良くない問題点が指摘されていた。そこで、1945年の日本人体形を詳細に模擬したボクセル形状ファントムを開発し、最新版PHITSを用いてそのファントム内の臓器線量を評価した。また、その計算手法を用いて様々な照射条件に対する臓器線量の応答関数を作成し、DS02に格納された原爆生存者各人の被ばくシナリオに対して瞬時に臓器線量を推定する手法を構築した。構築した手法は、将来のDS02の改訂に利用することができる。

論文

The Working group on the analysis and management of accidents (WGAMA); A Historical review of major contributions

Herranz, L. E.*; Jacquemain, D.*; Nitheanandan, T.*; Sandberg, N.*; Barr$'e$, F.*; Bechta, S.*; Choi, K.-Y.*; D'Auria, F.*; Lee, R.*; 中村 秀夫

Progress in Nuclear Energy, 127, p.103432_1 - 103432_14, 2020/09

 被引用回数:4 パーセンタイル:18.87(Nuclear Science & Technology)

WGAMA started on Dec. 31st 1999 to assess and strengthen the technical basis needed for the prevention, mitigation and management of potential accidents in NPP and to facilitate international convergence on safety issues and AM analyses and strategies. WGAMA addresses reactor thermal-hydraulics (Thys), in-vessel behavior of degraded cores, containment behavior and protection, and FP release, transport, deposition and retention, for both current and advanced reactors. This paper summarizes such WGAMA contributions in Thys, CFD and severe accidents, which include the Fukushima-Daiichi accident impacts on the WGAMA activities and their substantial outcomes. Around 50 technical reports have become reference in the related fields, which appear in References. Recommendations in these reports include further research, some of which have given rise to the joint projects conducted or underway within the OECD framework. Ongoing WGAMA activities are numerous and a number of them are to be launched in the near future, which are shortly mentioned too.

論文

Strong lattice anharmonicity exhibited by the high-energy optical phonons in thermoelectric material

Wu, P.*; Fan, F.-R.*; 萩原 雅人*; 古府 麻衣子; Peng, K.*; 石川 喜久*; Lee, S.*; 本田 孝志*; 米村 雅雄*; 池田 一貴*; et al.

New Journal of Physics (Internet), 22(8), p.083083_1 - 083083_9, 2020/08

 被引用回数:12 パーセンタイル:64.51(Physics, Multidisciplinary)

熱電材料SnSeは、過去数年間で世界的な関心を呼び、その固有の強い格子非調和性は、その優れた熱電性能の重要な要素と見なされている。一方、SnSeにおける格子非調和性の理解は、特にフォノンダイナミクスがこの動作によってどのように影響を受けるかに関して、依然として不十分である。そのため、中性子全散乱,非弾性中性子散乱,ラマン分光法、および凍結フォノン計算により、Na$$_{0.003}$$Sn$$_{0.997}$$Se$$_{0.9}$$S$$_{0.1}$$の格子力学の包括的な研究を行った。格子非調和性は、対分布関数,非弾性中性子散乱、およびラマン測定によって確かめられた。熱膨張と多重フォノン散乱の影響を分離することにより、後者は高エネルギー光学フォノンモードで非常に重要であることがわかった。フォノンモードの強い温度依存性は、この系の非調和性を示している。さらに、我々のデータは、Sドーピングにより、高エネルギー光学フォノンの線幅が広がることを明らかにした。私たちの研究は、SnSeの熱電性能は、フォノンエンジニアリングを介して格子熱伝導率への高エネルギー光学フォノンモードの寄与を減らすことによってさらに強化できることを示唆する。

論文

Dosimetric impact of a new computational voxel phantom series for the Japanese atomic bomb survivors; Pregnant females

Paulbeck, C.*; Griffin, K.*; Lee, C.*; Cullings, H.*; Egbert, S. D.*; 船本 幸代*; 佐藤 達彦; 遠藤 章; Hertel, N.*; Bolch, W. E.*

Radiation Research, 192(5), p.538 - 561, 2019/08

 被引用回数:13 パーセンタイル:59.85(Biology)

妊婦及び胎児の原爆生存者に対する被ばく線量評価は、放射線影響の疫学研究の上で極めて重要となる。従来は、女性の子宮壁に対する線量を妊婦及び胎児の被ばく線量と仮定していたが、本研究では、最新の計算科学記述を用いて受胎8, 15, 25, 38週齢の胎児及び妊婦に対する詳細人体モデルを構築し、その被ばく線量を精度よく計算した。その結果、従来手法では、光子及び中性子前方照射に対して最大で12-16%及び44-54%被ばく線量を過大評価していたことが分かった。これらの結果は、今後、妊婦及び胎児に対する放射線感受性の疫学調査を実施する上で、極めて重要となる。

論文

Dosimetric impact of a new computational voxel phantom series for the Japanese atomic bomb survivors; Children and adults

Griffin, K.*; Paulbeck, C.*; Bolch, W.*; Cullings, H.*; Egbert, S. D.*; 船本 幸代*; 佐藤 達彦; 遠藤 章; Hertel, N.*; Lee, C.*

Radiation Research, 191(4), p.369 - 379, 2019/04

 被引用回数:19 パーセンタイル:72.70(Biology)

原爆生存者に対する被ばく線量評価は、幼児・小児・成人の3年齢群に対する幾何学形状人体ファントムを用いて実施されており、最新の結果はDS02レポートにまとめられている。しかし、幾何学形状ファントムは、人体の詳細な解剖学的特性を表現しておらず、また、年齢群も3つでは不十分との指摘があった。そこで、1945年の日本人体系を詳細に模擬した6年齢群に対するボクセル形状ファントムを開発し、解剖学的な違いが線量評価に与える影響を調査した。その結果、典型的な原爆被ばく条件に対して光子及び中性子による臓器吸収線量は最大でそれぞれ25%及び70%程度異なることが明らかとなった。本成果は、今後、原爆生存者に対する線量再評価を行う際に役立つと考えられる。

論文

Pressure-induced Diels-Alder reactions in C$$_{6}$$H$$_{6}$$ - C$$_{6}$$F$$_{6}$$ cocrystal towards graphane structure

Wang, Y.*; Dong, X.*; Tang, X.*; Zheng, H.*; Li, K.*; Lin, X.*; Fang, L.*; Sun, G.*; Chen, X.*; Xie, L.*; et al.

Angewandte Chemie; International Edition, 58(5), p.1468 - 1473, 2019/01

 被引用回数:45 パーセンタイル:82.40(Chemistry, Multidisciplinary)

芳香族の圧力誘起重合反応(PIP)は、sp$$^{3}$$炭素骨格を構築するための新しい方法であり、ベンゼンとその誘導体を圧縮することによってダイヤモンド様構造を有するナノスレッドを合成した。ここで、ベンゼン-ヘキサフルオロベンゼン共結晶(CHCF)を圧縮することにより、PIP生成物中に層状構造を有するH-F置換グラフェンを同定した。その場中性子回折から決定された結晶構造およびガスクロマトグラフィー質量スペクトルによって同定された中間生成物に基づいて、20GPaでは、CHCFがベンゼンおよびヘキサフルオロベンゼンを交互に積み重ねた傾斜カラムを形成し、それらが[4+2]重合体に転化し、次いで、短距離秩序を持つ水素化フッ素化グラフェンに変化する。反応プロセスは[4+2]ディールス-アルダー, レトロディールス-アルダー、および1-1'カップリング反応を含み、前者はPIPの重要な反応である。われわれの研究は、CHCFの素反応を初めて確認した。これは、芳香族化合物のPIPについての新しい見方を提供する。

論文

Battery-free, skin-interfaced microfluidic/electronic systems for simultaneous electrochemical, colorimetric, and volumetric analysis of sweat

Bandodkar, A. J.*; Gutruf, P.*; Choi, J.*; Lee, K.-H.*; 関根 由莉奈; Reeder, J. T.*; Jeang, W. J.*; Aranyosi, A. J.*; Lee, S. P.*; Model, J. B.*; et al.

Science Advances (Internet), 5(1), p.eaav3294_1 - eaav3294_15, 2019/01

 被引用回数:520 パーセンタイル:99.87(Multidisciplinary Sciences)

非侵襲でバイオマーカーを検出し得るウェアラブルデバイスが注目されている。しかしながら現在までに存在するウェアラブルデバイスはその電力源や検出部分などの小型化が困難であったことから重さや大きさの点でポータビリティに欠けていた。本研究では、バッテリーフリーでかつ電気的、呈色式を用いて重要バイオマーカーである塩化物, 乳酸, グルコース, pHを検出できるスウェットデバイスを開発した。

論文

A Fluorometric skin-interfaced microfluidic device and smartphone imaging module for ${{it in situ}}$ quantitative analysis of sweat chemistry

関根 由莉奈; Kim, S. B.*; Zhang, Y.*; Bandodkar, A. J.*; Xu, S.*; Choi, J.*; 入江 将大*; Ray, T. R.*; Kohli, P.*; 香西 直文; et al.

Lab on a Chip, 18(15), p.2178 - 2186, 2018/08

近年、スウェットに含まれる代謝産物やイオン等を用いたPoint of Careが高く注目されている。本研究では、それらのバイオマーカーを効果的にその場で検出することを目的として、ソフトで薄いウェアラブルマイクロ流路デバイスとスマートフォンを基盤とした蛍光イメージングシステムを提案する。精密に設計されたマイクロ流路は、皮膚から汗を時間シーケンス制御で集めることを可能にした。また、集められた汗から蛍光検出剤によって検出された塩化物,ナトリウム,亜鉛濃度をスマートフォンを基盤とした蛍光イメージングシステムで正確に定量分析することに成功した。このシステムを実際に試験したところ、正確に効率よく作動することを確認した。

100 件中 1件目~20件目を表示