JAEA
  • help
  • PC | SP
  • JP | EN
          
検索対象：     
報告書番号：
※ 半角英数字
 年 ～ 
 年
全てクリア
検索結果：　36 件中 1件目～20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys

Wei, D.*; Gong, W.; 都留 智仁; Lobzenko, I.; Li, X.*; Harjo, S.; 川崎 卓郎; Do, H.-S.*; Bae, J. W.*; Wagner, C.*; et al.

International Journal of Plasticity, 159, p.103443_1 - 103443_18, 2022/12

https://doi.org/10.1016/j.ijplas.2022.103443
 被引用回数：28 パーセンタイル：98.38(Engineering, Mechanical)

Face-centered cubic single-phase high-entropy alloys (HEAs) containing multi-principal transition metals have attracted significant attention, exhibiting an unprecedented combination of strength and ductility owing to their low stacking fault energy (SFE) and large misfit parameter that creates severe local lattice distortion. Increasing both strength and ductility further is challenging. In the present study, we demonstrate via meticulous experiments that the CoCrFeNi HEA with the addition of the substitutional metalloid Si can retain a single-phase FCC structure while its yield strength (up to 65%), ultimate strength (up to 34%), and ductility (up to 15%) are simultaneously increased, owing to a synthetical effect of the enhanced solid solution strengthening and a reduced SFE. The dislocation behaviors and plastic deformation mechanisms were tuned by the addition of Si, which improves the strain hardening and tensile ductility. The present study provides new strategies for enhancing HEA performance by targeted metalloid additions.

論文

Rediscovery of Hall-Petch strengthening in bulk ultrafine grained pure Mg at cryogenic temperature; A Combined ${it in situ}$ neutron diffraction and electron microscopy study

Zheng, R.*; Gong, W.; Du, J.-P.*; Gao, S.*; Liu, M.*; Li, G.*; 川崎 卓郎; Harjo, S.; Ma, C.*; 尾方 成信*; et al.

Acta Materialia, 238, p.118243_1 - 118243_15, 2022/10

https://doi.org/10.1016/j.actamat.2022.118243
 被引用回数：18 パーセンタイル：94.44(Materials Science, Multidisciplinary)

Grain refinement can lead to the strengthening of metallic materials according to the Hall-Petch relationship. However, our recent results suggested that grain boundary sliding is the dominant deformation mode in bulk ultrafine grained (UFG) pure Mg at room temperature, leading to softening. Here, for the first time, we report that the Hall-Petch strengthening can be regained in bulk UFG pure Mg at cryogenic temperature. At 77K, the UFG pure Mg with a mean grain size of 0.6 $$mu$$m exhibited ultrahigh tensile yield strength and ultimate tensile strength of 309 MPa and 380 MPa, respectively. Combined ${it in situ}$ neutron diffraction and electron microscopy investigation indicated that residual dislocation structures and deformation twins hardly formed in the UFG specimen during tensile test at 298K. In contrast, fast accumulation of lattice defects and remarkable reorientation were evident at 77K, suggesting that the grain-boundary-mediated process was suppressed and the plastic deformation was dominated by dislocation slip and deformation twinning. In addition, all the pure Mg specimens exhibited pronounced strain hardening at 77 K, which was mainly attributed to the suppressed grain boundary sliding and dynamic recovery. The mean dislocation density and relative fractions of dislocations with various Burgers vectors of the UFG specimen deformed at 77K were determined quantitatively from neutron diffraction data.

論文

Two-step Mott transition in Ni(S,Se)$$_2$$; $$mu$$SR studies and charge-spin percolation model

Sheng, Q.*; 金子 竜也*; Yamakawa, Kohtaro*; Guguchia, Z.*; Gong, Z.*; Zhao, G.*; Dai, G.*; Jin, C.*; Guo, S.*; Fu, L.*; et al.

Physical Review Research (Internet), 4(3), p.033172_1 - 033172_14, 2022/09

https://doi.org/10.1103/PhysRevResearch.4.033172

A pyrite system NiS$$_{2-x}$$Se$$_x$$ exhibits a bandwidth controlled Mott transition via (S,Se) substitutions in a two-step process: the antiferromagnetic insulator (AFI) to antiferromagnetic metal (AFM) transition at $$xsim$$0.45 followed by the AFM to paramagnetic metal (PMM) transition at $$xsim$$1.0. Among a few other Mott systems which exhibit similar two-step transitions, Ni(S,Se)$$_2$$ is of particular interest because a large intermediate AFM region in the phase diagram would provide unique opportunities to study the interplay between the spin and charge order. By comparing and combining our muon spin relaxation studies and previous neutron scattering studies, here we propose a picture where the spin order is maintained by the percolation of "nonmetallic" localized and dangling Ni moments surrounded by S, while the charge transition from AFI to AFM is caused by the percolation of the conducting paths generated by the Ni-Se-Ni bonds.

論文

Grain orientation dependence of deformation microstructure evolution and mechanical properties in face-centered cubic high/medium entropy alloys

吉田 周平*; Fu, R.*; Gong, W.; 池内 琢人*; Bai, Y.*; Feng, Z.*; Wu, G.*; 柴田 曉伸*; Hansen, N.*; Huang, X.*; et al.

IOP Conference Series; Materials Science and Engineering, 1249, p.012027_1 - 012027_6, 2022/08

https://doi.org/10.1088/1757-899X/1249/1/012027
 被引用回数：0 パーセンタイル：0.83(Metallurgy & Metallurgical Engineering)

This study revealed characteristics of the deformation behavior in high/medium entropy alloys (HEAs/MEAs) with face-centered cubic (FCC) structure. A Co$$_{60}$$Ni$$_{40}$$ alloy and a Co$$_{20}$$Cr$$_{40}$$Ni$$_{40}$$ MEA having low and high friction stresses (fundamental resistance to dislocation glide in solid solutions), respectively, but similar in other properties, including their stacking fault energy and grain sizes, were compared. The MEA exhibited a higher yield strength and work-hardening ability than those in the Co$$_{60}$$Ni$$_{40}$$ alloy at room temperature. Deformation microstructures of the Co$$_{60}$$Ni$$_{40}$$ alloy were composed of coarse dislocation cells (DCs) in most grains, and a few deformation twins (DTs) formed in grains with tensile axis (TA) nearly parallel to $$<$$111$$>$$. In the MEA, three microstructure types were found depending on the grain orientations: (1) fine DCs developed in TA$$sim$$//$$<$$100$$>$$-oriented grains; (2) planar dislocation structures (PDSs) formed in grains with other orientations; and (3) dense DTs adding to the PDSs developed in TA$$sim$$//$$<$$111$$>$$-oriented grains. The results imply difficulty in cross-slip of screw dislocations and dynamic recovery in the MEA, leading to an increase in the dislocation density and work-hardening rate. Our results suggest that FCC high-alloy systems with high friction stress inherently develop characteristic deformation microstructures advantageous for achieving high strength and large ductility.

論文

Work hardening behavior of hot-rolled metastable Fe$$_{50}$$Co$$_{25}$$Ni$$_{10}$$Al$$_{5}$$Ti$$_{5}$$Mo$$_{5}$$ medium-entropy alloy; In situ neutron diffraction analysis

Kwon, H.*; Harjo, S.; 川崎 卓郎; Gong, W.; Jeong, S. G.*; Kim, E. S.*; Sathiyamoorthi, P.*; 加藤 秀実*; Kim, H. S.*

Science and Technology of Advanced Materials, 23(1), p.579 - 586, 2022/00

https://doi.org/10.1080/14686996.2022.2122868
 被引用回数：6 パーセンタイル：63.54(Materials Science, Multidisciplinary)

Metastability engineering is a strategy to enhance the strength and ductility of alloys via deliberately lowering phase stability and prompting deformation-induced martensitic transformation. In this work, the martensitic transformation and its effect on the mechanical response of a Fe$$_{50}$$Co$$_{25}$$Ni$$_{10}$$Al$$_{5}$$Ti$$_{5}$$Mo$$_{5}$$ medium-entropy alloy (MEA) were studied by in situ neutron diffraction under tensile loading. This work shows how great a role FCC to BCC martensitic transformation can play in enhancing the mechanical properties of ferrous MEAs.

論文

Suppressed lattice disorder for large emission enhancement and structural robustness in hybrid lead iodide perovskite discovered by high-pressure isotope effect

Kong, L.*; Gong, J.*; Hu, Q.*; Capitani, F.*; Celeste, A.*; 服部 高典; 佐野 亜沙美; Li, N.*; Yang, W.*; Liu, G.*; et al.

Advanced Functional Materials, 31(9), p.2009131_1 - 2009131_12, 2021/02

https://doi.org/10.1002/adfm.202009131
 被引用回数：23 パーセンタイル：80.82(Chemistry, Multidisciplinary)

有機-無機ハロゲン化物ペロブスカイトは非常に柔らかいために、圧力などの外部刺激により格子定数を容易に変化させることができ、有用な光電特性を引き出すのに有効である。一方でこの特性は、多少の加圧でも、格子を歪ませてしまい、光と物質の相互作用を弱め、それによる性能の低下を引き起こす。そこで本研究では、代表的な物質であるヨウ化メチルアンモニウム鉛に対して圧力効果および同位体効果を調べ、それらが格子歪を抑制することが分かった。このことは、それらが、これまで得られなかったような光学的,機械的特性を持つ物質を得る手段として有効であることを示している。

論文

${it In situ}$ investigation of the microstructure evolution in Long-Period-Stacking-Ordered (LPSO) magnesium alloys as a function of the temperature

M$'a$this, K.*; Drozdenko, D.*; N$'e$meth, G.*; Harjo, S.; Gong, W.*; 相澤 一也; 山崎 倫昭*; 河村 能人*

Frontiers in Materials (Internet), 6, p.270_1 - 270_9, 2019/11

https://doi.org/10.3389/fmats.2019.00270
 被引用回数：7 パーセンタイル：30.71(Materials Science, Multidisciplinary)

Deformation behavior of two Mg-Zn-Y magnesium alloys, having a different fraction of the long-period-stacking-ordered (LPSO) phase, has been investigated at room temperature and 200$$^{circ}$$C by a combination of ${it in situ}$ neutron diffraction (ND) and acoustic emission (AE) measurements. The results indicate that the twinning in the magnesium matrix and the kinking in the LPSO phase strongly depend on the composition of the material and the testing temperature. Further, active deformation mechanisms and particularly the load transfer from the magnesium matrix to the LPSO phase define the mechanical properties of the investigated alloys.

論文

High stereographic resolution texture and residual stress evaluation using time-of-flight neutron diffraction

徐 平光; Harjo, S.; 小島 真由美*; 鈴木 裕士; 伊藤 崇芳*; Gong, W.; Vogel, S. C.*; 井上 純哉*; 友田 陽*; 相澤 一也; et al.

Journal of Applied Crystallography, 51(3), p.746 - 760, 2018/06

AA2018-0163.pdf:3.0MB

https://doi.org/10.1107/S1600576718004004
 被引用回数：26 パーセンタイル：90.31(Chemistry, Multidisciplinary)

Neutron diffraction texture measurements provide bulk textures with excellent grain statistics even for large grained materials, together with the crystallographic parameters and microstructure information such as phase fractions, coherent crystallite size, root mean square microstrain, macroscopic/intergranular stress/strain. The procedure for high stereographic resolution texture and residual stress evaluation was established at the TAKUMI engineering materials diffractometer. The pole figure evaluation of a limestone standard sample with a trigonal crystal structure suggested that the obtained precision for texture measurement is comparable with the oversea well-established neutron beam lines utilized for texture measurements. A high strength martensite-austenite multilayered steel was employed for further verification of the reliability of simultaneous Rietveld analysis of multiphase textures and macro stress tensors. By using a geometric mean micro-mechanical model, the macro stress tensor analysis with a plane stress assumption showed a RD-TD in-plane compressive stress (about -330 MPa) in martensite layers and a RD-TD in-plane tensile stress (about 320 MPa) in austenite layers. The phase stress partitioning was ascribed to the additive effect of volume expansion during martensite transformation and the linear contraction misfit during water quenching.

論文

Work hardening, dislocation structure, and load partitioning in lath-martensite determined by ${it in situ}$ neutron diffraction line profile analysis

Harjo, S.; 川崎 卓郎; 友田 陽*; Gong, W.*; 相澤 一也; Tichy, G.*; Shi, Z.*; Ung$'a$r, T.*

Metallurgical and Materials Transactions A, 48(9), p.4080 - 4092, 2017/09

AA2017-0020.pdf:3.33MB

https://doi.org/10.1007/s11661-017-4172-0
 被引用回数：54 パーセンタイル：90.48(Materials Science, Multidisciplinary)

${it in situ}$ neutron diffraction during tensile deformation of lath martensite steel containing 0.22 mass% of carbon, is performed using TAKUMI of J-PARC. The diffraction peaks at plastically deformed states exhibit asymmetries as the reflection of redistributions of the stress and dislocation densities/arrangements in lath-packets where the dislocation glides are favorable (soft packet) and unfavorable (hard packet). The dislocation density is as high as 10$$^{15}$$ m$$^{-2}$$ at the as-quenched state, and then during tensile straining, the load and the dislocation density become different between the two lath-packets. The dislocation character and arrangement vary also in the hard packet, but hardly change in the soft packet. The hard packet plays an important role in the high work hardening in martensite, which could be understood by taking into account not only the increase of the dislocation density but also the change in dislocation arrangement.

論文

Quantitative evaluation of texture and dislocations during annealing after hot deformation in austenitic steel using neutron diffraction

友田 陽*; 佐藤 成男*; Uchida, M.*; 徐 平光; Harjo, S.; Gong, W.; 川崎 卓郎

Materials Science Forum, 905, p.25 - 30, 2017/08

https://doi.org/10.4028/www.scientific.net/MSF.905.25

Microstructural change during hot compressive deformation at 700 $$^{circ}$$C followed by isothermal annealing for a Fe-32Ni austnitic alloy was monitored using ${it in situ}$ neutron diffraction. The evolution of deformation texture with 40% compression and its change to recrystallization texture during isothermal annealing were presented by inverse pole figures for the axial and radial directions. The change in dislocation density was tracked using the convolutional muli-profile whole profile fitting method. To obtain the fitting results with good statistics, at least 60 s time-slicing for the event-mode recorded data was needed. The average dislocation density in 60 s after hot compression was determined to be 2.8 $$times$$ 10$$^{14}$$ m$$^{-2}$$ that decreased with increasing of annealing time.

論文

Uniaxial pressure effect on the magnetic ordered moment and transition temperatures in BaFe$$_{2-x}$$T$$_{x}$$As$$_{2}$$ ($$T$$ = Co,Ni)

Tam, D. M.*; Song, Y.*; Man, H.*; Cheung, S. C.*; Yin, Z.*; Lu, X.*; Wang, W.*; Frandsen, B. A.*; Liu, L.*; Gong, Z.*; et al.

Physical Review B, 95(6), p.060505_1 - 060505_6, 2017/02

https://doi.org/10.1103/PhysRevB.95.060505
 被引用回数：23 パーセンタイル：71.14(Materials Science, Multidisciplinary)

We use neutron diffraction and muon spin relaxation to study the effect of in-plane uniaxial pressure on the antiferromagnetic (AF) orthorhombic phase in BaFe$$_{2-x}$$T$$_{x}$$As$$_{2}$$ and its Co- and Ni-substituted members near optimal superconductivity. In the low-temperature AF ordered state, uniaxial pressure necessary to detwin the orthorhombic crystals also increases the magnetic ordered moment, reaching an 11% increase under 40 MPa for BaFe$$_{1.9}$$Co$$_{0.1}$$As$$_2$$, and a 15% increase for BaFe$$_{1.915}$$Ni$$_{0.085}$$As$$_2$$. We also observe an increase of the AF ordering temperature ($$T_N$$) of about 0.25 K/MPa in all compounds, consistent with density functional theory calculations that reveal better Fermi surface nesting for itinerant electrons under uniaxial pressure. The doping dependence of the magnetic ordered moment is captured by combining dynamical mean field theory with density functional theory, suggesting that the pressure-induced moment increase near optimal superconductivity is closely related to quantum fluctuations and the nearby electronic nematic phase.

論文

Progress in bulk texture measurement using neutron diffraction

徐 平光; Harjo, S.; 伊藤 崇芳*; 森井 幸生*; Gong, W.; 鈴木 裕士; 秋田 貢一; 鈴木 徹也*; 友田 陽; Lutterotti, L.*

JPS Conference Proceedings (Internet), 8, p.031022_1 - 031022_6, 2015/09

https://doi.org/10.7566/JPSCP.8.031022

The current status of bulk texture measurements both using angle dispersive neutron diffraction and time-of-flight neutron diffraction at JAEA was briefly reviewed, then the effect of sample orientation coverage in the time-of-flight neutron diffraction on the reliability of reconstructed pole figure on the reliability of reconstructed pole figure was simply compared after the simultaneous Rietveld texture analysis. The similar texture results obtained at different orientation coverage levels suggests that it is possible to reduce the sample rotation times reasonably during the bulk texture measurement.

論文

Overview of plasma-material interaction experiments on EAST employing MAPES

Ding, F.*; Luo, G.-N.*; Pitts, R.*; Litnovsky, A.*; Gong, X.*; Ding, R.*; Mao, H.*; Zhou, H.*; Wampler, W. R.*; Stangeby, P. C.*; et al.

Journal of Nuclear Materials, 455(1-3), p.710 - 716, 2014/12

https://doi.org/10.1016/j.jnucmat.2014.09.017
 被引用回数：25 パーセンタイル：87.99(Materials Science, Multidisciplinary)

A movable material probe system (Material and Plasma Evaluation System: MAPES) with an independent pumping system and a sample exchange chamber has been developed and installed on a horizontal port of the EAST tokamak for studies of plasma material interaction (PMI). In the 2012 experimental campaign, deposition and erosion were studied for three samples: mock-up of the outer first wall panels (FWPs) in ITER, castellated tungsten, and molybdenum mirrors. The FWPs with carbon deposition layer were exposed to helium plasmas. The maximum erosion rate of the carbon was valuated to be 8 nm/s. The castellated tungsten with rectangular cells and roof-like shaped cells was exposed to deuterium plasmas to compare amount of deposits on the gap surface. The amount of carbon and boron impurities on the gap surface of the roof-like shaped cells were reduced to less than 30% compared with that of the rectangular cells. The molybdenum mirrors of which protective ducts are installed in front were exposed to deuterium plasmas in order to investigate effects of length of the ducts. It was found that the reflectivity of the mirrors with 60 mm-long protective ducts is kept the initial reflectivity.

論文

Event structure and double helicity asymmetry in jet production from polarized $$p + p$$ collisions at $$sqrt{s}$$ = 200 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review D, 84(1), p.012006_1 - 012006_18, 2011/07

https://doi.org/10.1103/PhysRevD.84.012006
 被引用回数：29 パーセンタイル：73.24(Astronomy & Astrophysics)

重心エネルギー200GeVでの縦偏極陽子陽子衝突からのジェット生成のイベント構造と二重非対称($$A_{LL}$$)について報告する。光子と荷電粒子がPHENIX実験で測定され、イベント構造がPHYTIAイベント生成コードの結果と比較された。再構成されたジェットの生成率は2次までの摂動QCDの計算で十分再現される。測定された$$A_{LL}$$は、一番低い横運動量で-0.0014$$pm$$0.0037、一番高い横運動量で-0.0181$$pm$$0.0282であった。この$$A_{LL}$$の結果を幾つかの$$Delta G(x)$$の分布を仮定した理論予想と比較する。

論文

Identified charged hadron production in $$p + p$$ collisions at $$sqrt{s}$$ = 200 and 62.4 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; 秋葉 康之*; Al-Bataineh, H.*; Alexander, J.*; 青木 和也*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06

https://doi.org/10.1103/PhysRevC.83.064903
 被引用回数：184 パーセンタイル：99.45(Physics, Nuclear)

200GeVと62.4GeVでの陽子陽子の中心衝突からの$$pi, K, p$$の横運動量分布及び収量をRHICのPHENIX実験によって測定した。それぞれエネルギーでの逆スロープパラメーター、平均横運動量及び単位rapidityあたりの収量を求め、異なるエネルギーでの他の測定結果と比較する。また$$m_T$$や$$x_T$$スケーリングのようなスケーリングについて示して陽子陽子衝突における粒子生成メカニズムについて議論する。さらに測定したスペクトルを二次の摂動QCDの計算と比較する。

論文

Azimuthal correlations of electrons from heavy-flavor decay with hadrons in $$p+p$$ and Au+Au collisions at $$sqrt{s_{NN}}$$ = 200 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; 秋葉 康之*; Al-Bataineh, H.*; Alexander, J.*; 青木 和也*; Aphecetche, L.*; Aramaki, Y.*; et al.

Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04

https://doi.org/10.1103/PhysRevC.83.044912
 被引用回数：9 パーセンタイル：49.6(Physics, Nuclear)

重いフレーバーのメソンの崩壊からの電子の測定は、このメソンの収量が金金衝突では陽子陽子に比べて抑制されていることを示している。われわれはこの研究をさらに進めて二つの粒子の相関、つまり重いフレーバーメソンの崩壊からの電子と、もう一つの重いフレーバーメソンあるいはジェットの破片からの荷電ハドロン、の相関を調べた。この測定は重いクォークとクォークグルオン物質の相互作用についてのより詳しい情報を与えるものである。われわれは特に金金衝突では陽子陽子に比べて反対側のジェットの形と収量が変化していることを見いだした。

論文

Measurement of neutral mesons in $$p$$ + $$p$$ collisions at $$sqrt{s}$$ = 200 GeV and scaling properties of hadron production

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03

https://doi.org/10.1103/PhysRevD.83.052004
 被引用回数：177 パーセンタイル：98.48(Astronomy & Astrophysics)

RHIC-PHENIX実験で重心エネルギー200GeVの陽子陽子衝突からの$$K^0_s$$, $$omega$$, $$eta'$$と$$phi$$中間子生成の微分断面積を測定した。これらハドロンの横運動量分布のスペクトルの形はたった二つのパラメーター、$$n, T$$、のTsallis分布関数でよく記述できる。これらのパラメーターはそれぞれ高い横運動量と低い横運動量の領域のスペクトルを決めている。これらの分布をフィットして得られた積分された不変断面積はこれまで測定されたデータ及び統計モデルの予言と一致している。

論文

Biological effects of carbon-ion beam on induction of male-sterility and a novel season-dependent floral homeotic mutant in ${it Solanum villosum}$ Miller

Ojiewo, C. O.*; Agong, S. G.*; 村上 賢治*; 田中 淳; 長谷 純宏; 桝田 正治*

Journal of Horticultural Science & Biotechnology, 81(4), p.559 - 564, 2006/07

${it Solanum villosum}$は栄養価が高く薬用的価値もあるためアフリカで消費量が上昇している葉物野菜であるが、比較的早くに多数の種子をつけるため葉の収量が低いことが問題となっている。本研究では、この問題を克服するため、炭素イオンビーム照射による雄性不稔性誘発についての効果を調査した。生育抑制や種子稔性への影響を考慮すると20-30Gyの炭素イオン照射が適切と考えられた。炭素イオンビーム照射により、新規の雄性不稔変異体が得られた。この変異体は、春は不稔性を示すが、夏は中間型でやや稔性が回復し、秋には種子を形成した。季節に応じて稔性が回復する形質は、収量の増加と同時に種子の増殖に利用できる可能性がある有用な形質である。

論文

Male-sterility induced by $$gamma$$-ray irradiation of African nightshade (${it Solanum nigrum}$ L. ssp. ${it villosum}$) seed

Ojiewo, C. O.*; Agong, S. G.*; 村上 賢治*; 田中 淳; 長谷 純宏; 桝田 正治*

Journal of Horticultural Science & Biotechnology, 80(6), p.699 - 704, 2005/11

アフリカンナイトシェード(${it Solanum nigrum}$ L. spp. ${it villosum}$)はアフリカでよく消費される葉野菜であるが、発芽から開花・結実までの期間が短いことから葉の収量が比較的少ない。つまり、生殖生長の開始後、花粉や種子,果実の発達に養分が送られるため、葉に対する養分の転流が少なくなることが原因である。本研究では、雄性不稔性を利用することによって、養分の転流を葉に向けることにより収量を増加させることを考え、$$gamma$$線の種子照射により得られたさまざまな変異体を調査した。照射種子の発芽率,生存率,種子稔性並びに雄性不稔変異体誘発率から、100Gyの$$gamma$$線が変異誘発に最適であると考えられた。M2世代で選抜された雄性不稔変異体には4つのタイプ、すなわち、(1)稔性は無いが酢酸カーミンで花粉が染色される個体、(2)酢酸カーミンで花粉が染色されない個体、(3)花粉が形成されない個体、及び(4)花粉量が著しく少ない個体、が見られた。本研究で得られた雄性不稔変異体は、生殖や果実形成を制限することによって、葉の収量の増加につながると期待される。

口頭

動的フェライト変態した低合金鋼の組織観察と集合組織評価

徐 平光; 友田 陽*; Gong, W.*; Vogel, S. C.*; 鈴木 裕士; 鈴木 徹也*

no journal, , 

二相域で大ひずみ圧縮中のフェライト結晶方位密度は小ひずみ加工より著しい変化を示したが、その形成機構はまた不明瞭のため、同じプロセスで熱間圧縮した低合金鋼試料を用い、走査型電子顕微鏡と飛行時間法中性子回折装置でミクロ組織とバルク集合組織を評価した。組織観察によって、大ひずみ圧縮した試料は動的再結晶が生じたことを確認した。その集合組織は強い(001)[uvw]と(111)[uvw]繊維配向が構成され、以前の中性子その場回折実験から予想した結果と一致した。

36 件中 1件目～20件目を表示