Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kim, Y. S.*; Chae, H.*; Lee, D.-Y.*; Han, J. H. *; Hong, S.-K.*; Na, Y. S.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Lee, S.-Y.*
Materials Science & Engineering A, 899, p.146453_1 - 146453_7, 2024/05
This work focused on the mechanical properties and serration-involved deformation behavior of advanced alloys at 15 K. Evolution of stacking faults and -martensite improved the mechanical performance of CoCrNi alloys, and significant strain-induced martensite transformation of DED-SS316L led to superior strength and strain hardening. A magnitude in stress drop was governed by dislocation density, phase type, and lattice defects, irrespective of processing method. FCC {200} notably was influenced recovery behavior after stress drop, and the contribution of strain energy density by serration on tensile toughness was the greatest for HR-CoCrNi.
Park, P.*; Cho, W.*; Kim, C.*; An, Y.*; Kang, Y.-G.*; Avdeev, M.*; Sibille, R.*; 飯田 一樹*; 梶本 亮一; Lee, K. H.*; et al.
Nature Communications (Internet), 14, p.8346_1 - 8346_9, 2023/12
被引用回数:0 パーセンタイル:0.00(Multidisciplinary Sciences)The triangular lattice antiferromagnet (TLAF) has been the standard paradigm of frustrated magnetism for several decades. The most common magnetic ordering in insulating TLAFs is the 120 structure. However, a new triple- chiral ordering can emerge in metallic TLAFs, representing the short wavelength limit of magnetic skyrmion crystals. We report the metallic TLAF CoTaS as the first example of tetrahedral triple- magnetic ordering with the associated topological Hall effect (non-zero ). We also present a theoretical framework that describes the emergence of this magnetic ground state, which is further supported by the electronic structure measured by angle-resolved photoemission spectroscopy. Additionally, our measurements of the inelastic neutron scattering cross section are consistent with the calculated dynamical structure factor of the tetrahedral triple- state.
近藤 洋介*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; 馬場 秀忠*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
被引用回数:6 パーセンタイル:93.49(Multidisciplinary Sciences)非常に中性子が過剰な原子核Oは、陽子、中性子ともに魔法数であることから古くからその性質に興味が持たれていたが、酸素の最後の束縛核Oよりも中性子が4個も多いため、これまで観測されてこなかった。この論文では、理化学研究所RIBFにてFからの1陽子ノックアウト反応によってOを生成し、そこから放出される中性子を測定することによって初めてその観測に成功した。核構造の観点からは、Oでは二重閉殻が保たれているか興味が持たれていたが、実験で得られた分光学的因子が殻模型計算で予言されて程度の大きいことから、閉殻構造をもたない可能性が高いことがわかった。
Wang, H.*; 安田 昌弘*; 近藤 洋介*; 中村 隆司*; Tostevin, J. A.*; 緒方 一介*; 大塚 孝治*; Poves, A.*; 清水 則孝*; 吉田 数貴; et al.
Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08
被引用回数:2 パーセンタイル:79.22(Astronomy & Astrophysics)Neからの1中性子除去反応を用いて、Neの詳細な線分光を行った。平行運動量分布の解析に基づき、Neの準位構造とスピンパリティを決定し、初めて負のパリティ状態を同定した。測定された断面積と運動量分布から、N=20とN=28のシェルギャップの消失の証拠となる有意なintruder p-wave強度が明らかになった。束縛状態については、弱いf-waveの可能性のある強度が観測された。いくつかの有効相互作用を用いた大規模殻模型計算では、実験的に観測された大きなp-wave強度と小さなf-wave強度は再現されず、Ne同位体に沿った反転の島への遷移の完全な理論的記述への挑戦が続いていることを示している。
Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.
Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08
被引用回数:1 パーセンタイル:59.27(Astronomy & Astrophysics)Scからの1陽子ノックアウト反応を用いて、CaとCaのガンマ崩壊を観測した。Caでは1456(12)keVの線遷移が、Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的にと割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素であると軌道はほぼ縮退しており、これはCaが二重魔法核である可能性を排除し、Ca同位体のドリップラインをCaあるいはそれ以上にまで広げる可能性がある。
Kwon, H.*; Sathiyamoorthi, P.*; Gangaraju, M. K.*; Zargaran, A.*; Wang, J.*; Heo, Y.-U.*; Harjo, S.; Gong, W.; Lee, B.-J.*; Kim, H. S.*
Acta Materialia, 248, p.118810_1 - 118810_12, 2023/04
被引用回数:15 パーセンタイル:99.09(Materials Science, Multidisciplinary)Maraging steels, known for ultrahigh strength and good fracture toughness, derive their superior properties from lath martensite structure with high-density nanoprecipitates. In this work, we designed a novel Fe-based medium-entropy alloy with a chemical composition of FeCoNiMo in atomic% by utilizing the characteristics of the maraging steels. By a single-step aging of only 10 min at 650 C, the alloy showed microstructures consisting of a very high number density of (Fe, Co, Ni)Mo-type nanoprecipitates in lath martensite structure and reverted FCC phase, which led to ultrahigh yield strength higher than 2 GPa. This work demonstrates a novel direction to produce strong and ductile materials by expanding the horizons of material design with the aid of high-entropy concept and overcoming the limits of conventional materials.
Woo, W.*; Kim, Y. S.*; Chae, H. B.*; Lee, S. Y.*; Jeong, J. S.*; Lee, C. M.*; Won, J. W.*; Na, Y. S.*; 川崎 卓郎; Harjo, S.; et al.
Acta Materialia, 246, p.118699_1 - 118699_13, 2023/03
被引用回数:13 パーセンタイル:98.68(Materials Science, Multidisciplinary)In situ neutron diffraction experiments have been performed under loading in cast-wrought (CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The diffraction line profile analysis correlated the faulting-embedded crystal structure to the dislocation density, stacking/twin fault probability, and stacking fault energy as a function of strain. The results showed the initial dislocation density of 1.810 m in CW and 1.310 m in AM. It significantly increased up to 1.310 m- in CW and 1.710 m in AM near fracture. The dislocation density contributed to the flow stress of 470 MPa in CW and 600 MPa in AM, respectively. Meanwhile, the twin fault probability of CW (2.7%) was about two times higher than AM (1.3%) and the stacking fault probability showed the similar tendency. The twinning provided strengthening of 360 MPa in CW and 180 MPa in AM. Such a favorable strengthening via deformation twinning in CW and dislocation slip in AM was attributed to the stacking fault energy. It was estimated as 18.6 mJ/m in CW and 37.5 mJ/m in AM by the strain field of dislocations incorporated model. Dense dislocations, deformation twinning, and atomic-scale stacking structure were examined by using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM).
芝田 悟朗; Won, C.*; Kim, J.*; 野中 洋亮*; 池田 啓祐*; Wan, Y.*; 鈴木 雅弘*; 小出 常晴*; 田中 新*; Cheong, S.-W.*; et al.
Photon Factory Activity Report 2022 (インターネット), 2 Pages, 2023/00
Feをインターカレートした遷移金属ダイカルコゲナイド化合物FeTiSおよびFeTaSは、巨大な保磁力および垂直磁気異方性を示す強磁性体になることが知られている。我々は以前、FeTiSについてのX線磁気円二色性(XMCD)実験の結果から、Feの凍結していない軌道磁気モーメントが結晶場の1次摂動によって直接磁気異方性エネルギーを生むことを明らかにした。今回、FeTiSよりもさらに強い磁気異方性を示す遷移金属ダイカルコゲナイドFeTaSについて同様にXMCD実験を行い、磁気異方性の強さが何によって左右されているかを探ることを試みた。
Wei, D.*; Gong, W.; 都留 智仁; Lobzenko, I.; Li, X.*; Harjo, S.; 川崎 卓郎; Do, H.-S.*; Bae, J. W.*; Wagner, C.*; et al.
International Journal of Plasticity, 159, p.103443_1 - 103443_18, 2022/12
被引用回数:28 パーセンタイル:98.32(Engineering, Mechanical)Face-centered cubic single-phase high-entropy alloys (HEAs) containing multi-principal transition metals have attracted significant attention, exhibiting an unprecedented combination of strength and ductility owing to their low stacking fault energy (SFE) and large misfit parameter that creates severe local lattice distortion. Increasing both strength and ductility further is challenging. In the present study, we demonstrate via meticulous experiments that the CoCrFeNi HEA with the addition of the substitutional metalloid Si can retain a single-phase FCC structure while its yield strength (up to 65%), ultimate strength (up to 34%), and ductility (up to 15%) are simultaneously increased, owing to a synthetical effect of the enhanced solid solution strengthening and a reduced SFE. The dislocation behaviors and plastic deformation mechanisms were tuned by the addition of Si, which improves the strain hardening and tensile ductility. The present study provides new strategies for enhancing HEA performance by targeted metalloid additions.
Elekes, Z.*; Juhsz, M. M.*; Sohler, D.*; Sieja, K.*; 吉田 数貴; 緒方 一介*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; 馬場 秀忠*; et al.
Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12
被引用回数:2 パーセンタイル:47.44(Physics, Nuclear)VとVの低励起準位構造を初めて探索した。Vについては中性子ノックアウト反応と陽子非弾性散乱が、Vについては中性子ノックアウト反応データが得られた。Vについては4つ、Vについては5つの新たな遷移が確認された。Lenzi-Nowacki-Poves-Sieja (LNPS)相互作用に基づく殻模型計算との比較によって、それぞれの同位体について確認されたガンマ線のうち3つが、first 11/2状態とfirst 9/2状態からの崩壊と決定された。Vについては、(,)非弾性散乱断面積は四重極変形と十六重極変形を想定したチャネル結合法により解析されたが、十六重極変形の影響により、明確に反転の島に属するとは決定できなかった。
Enciu, M.*; Liu, H. N.*; Obertelli, A.*; Doornenbal, P.*; Nowacki, F.*; 緒方 一介*; Poves, A.*; 吉田 数貴; Achouri, N. L.*; 馬場 秀忠*; et al.
Physical Review Letters, 129(26), p.262501_1 - 262501_7, 2022/12
被引用回数:5 パーセンタイル:69.87(Physics, Multidisciplinary)230MeV/nucleonでのCaからの中性子ノックアウト反応が線分光と行われ、と軌道からの中性子ノックアウト反応の運動量分布が測定された。断面積はの閉殻と整合し、Ca同位体でのと閉殻と同程度に強い閉殻であることが確認された。運動量分布の分析からと軌道の平均二乗根半径の差は0.61(23)fmと決定され、これはmodified-shell-modelによる予言の0.7fmと整合した。これは、中性子過剰なCa同位体での軌道半径が大きいことが、中性子数にしたがって線形的に荷電半径が増える意外な現象の原因であることを示唆している。
小岩井 拓真*; Wimmer, K.*; Doornenbal, P.*; Obertelli, A.*; Barbieri, C.*; Duguet, T.*; Holt, J. D.*; 宮城 宇志*; Navrtil, P.*; 緒方 一介*; et al.
Physics Letters B, 827, p.136953_1 - 136953_7, 2022/04
被引用回数:4 パーセンタイル:71.46(Astronomy & Astrophysics)中性子過剰核Caでは、新魔法数34が発見されて以来、その構造を知るために多くの実験がなされてきたが、それを超える中性子過剰核の情報は全く知られてこなかった。本論文では、理化学研究所RIBFにてK, Ca, Caの励起状態から脱励起するガンマ線を初めて観測した結果を報告した。それぞれ1つのガンマ線しか得られなかったものの、KおよびCaのデータは、それぞれ、陽子のと軌道間のエネルギー差、中性子のと軌道間のエネルギー差を敏感に反映し、両方とも最新の殻模型計算によって200keV程度の精度で再現できることがわかった。また、1粒子状態の程度を特徴づける分光学的因子を実験データと歪曲波インパルス近似による反応計算から求め、その値も殻模型計算の値と矛盾しないことがわかった。
Zhao, Y.*; Suzuki, T.*; Iimori, T.*; Kim, H.-W.*; Ahn, J. R.*; 堀尾 眞史*; 佐藤 祐輔*; 深谷 有喜; Kanai, T.*; Okazaki, K.*; et al.
Physical Review B, 105(11), p.115304_1 - 115304_8, 2022/03
被引用回数:1 パーセンタイル:14.73(Materials Science, Multidisciplinary)本研究では、時間・角度分解光電子分光を用いて、SiC基板上に作製したグラフェン層におけるキャリアダイナミクスについて調べた。光ポンピング後の準結晶グラフェンのディラックバンドでは、電子ドーピングに層依存性が観測された。また、光誘起キャリア輸送量は基板からの距離に依存することがわかった。フラット基板及びステップ基板上の単層グラフェンの結果から、キャリアの生成源は界面のステップ状態に由来することがわかった。本メカニズムは、密度汎関数計算による電子構造を基にした動的モデルにより記述できる。
Wei, D.*; Wang, L.*; Zhang, Y.*; Gong, W.; 都留 智仁; Lobzenko, I.; Jiang, J.*; Harjo, S.; 川崎 卓郎; Bae, J. W.*; et al.
Acta Materialia, 225, p.117571_1 - 117571_16, 2022/02
被引用回数:61 パーセンタイル:99.71(Materials Science, Multidisciplinary)Recently-developed high-entropy alloys (HEAs) containing multiple principal metallic elements have ex-tended the compositional space of solid solutions and the range of their mechanical properties. Here we show that the realm of possibilities can be further expanded through substituting the constituent metals with metalloids, which are desirable for tailoring strength/ductility because they have chemical interactions and atomic sizes distinctly different from the host metallic elements. Specifically, the metalloid substitution increases local lattice distortion and short-range chemical inhomogeneities to elevate strength, and in the meantime reduces the stacking fault energy to discourage dynamic recovery and encourage defect accumulation via partial-dislocation-mediated activities. These impart potent dislocation storage to improve the strain hardening capability, which is essential for sustaining large tensile elongation. As such, metalloid substitution into HEAs evades the normally expected strength-ductility trade-off, enabling an unusual synergy of high tensile strength and extraordinary ductility for these single-phase solid solutions.
Kim, Y. S.*; Chae, H.*; Huang, E.-W.*; Jain, J.*; Harjo, S.; 川崎 卓郎; Hong, S. I.*; Lee, S. Y.*
Materials, 15(4), p.1312_1 - 1312_11, 2022/02
被引用回数:0 パーセンタイル:0.00(Chemistry, Physical)In this study, we manufactured a non-equiatomic (CoNi)CrFeC high-entropy alloy (HEA) consisting of a single-phase face-centered-cubic structure. The non-equiatomic (CoNi)CrFeC HEA revealed a good combination of strength and ductility in mechanical properties compared to the equiatomic CoNiCrFe HEA, due to both stable solid solution and precipitation-strengthened effects. The non-equiatomic stoichiometry resulted in not only a lower electronegativity mismatch, indicating a more stable state of solid solution, but also a higher stacking fault energy (SFE, 50 mJ/m) due to the higher amount of Ni and the lower amount of Cr. This higher SFE led to a more active motion of dislocations relative to mechanical twinning, resulting in severe lattice distortion near the grain boundaries and dislocation entanglement near the twin boundaries.
Kwon, H.*; Harjo, S.; 川崎 卓郎; Gong, W.; Jeong, S. G.*; Kim, E. S.*; Sathiyamoorthi, P.*; 加藤 秀実*; Kim, H. S.*
Science and Technology of Advanced Materials, 23(1), p.579 - 586, 2022/00
被引用回数:6 パーセンタイル:61.59(Materials Science, Multidisciplinary)Metastability engineering is a strategy to enhance the strength and ductility of alloys via deliberately lowering phase stability and prompting deformation-induced martensitic transformation. In this work, the martensitic transformation and its effect on the mechanical response of a FeCoNiAlTiMo medium-entropy alloy (MEA) were studied by in situ neutron diffraction under tensile loading. This work shows how great a role FCC to BCC martensitic transformation can play in enhancing the mechanical properties of ferrous MEAs.
Kim, Y. S.*; Chae, H.*; Woo, W.*; Kim, D.-K.*; Lee, D.-H.*; Harjo, S.; 川崎 卓郎; Lee, S. Y.*
Materials Science & Engineering A, 828, p.142059_1 - 142059_10, 2021/11
被引用回数:16 パーセンタイル:80.20(Nanoscience & Nanotechnology)CoCrNi medium entropy alloy (MEA) and stainless steel 316L (SS316L) were manufactured by direct energy deposition of additive manufacturing (DED-AM). Exceptional mechanical properties of DED CoCrNi at 210K were achieved by the activities of a multiple deformation scheme that changed from dislocation slip to twinning-induced plasticity followed by transformation-induced plasticity. While SS316L at room temperature has micro-twins, CoCrNi at 210K exhibited nano-twins, resulting from lower stacking fault energy. Moreover, transformed hexagonal close-packed (HCP) phases were found near the face-centered cubic (FCC) {111} grain boundaries, where remarkable stacking faults and severe lattice distortion were measured.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Chen, S.*; Chung, L. X.*; Duguet, T.*; Gmez-Ramos, M.*; et al.
Physical Review C, 104(4), p.044331_1 - 044331_16, 2021/10
被引用回数:6 パーセンタイル:69.23(Physics, Nuclear)理化学研究所のRIビームファクトリーにて中性子過剰Clの励起状態をArからのノックアウト反応によって生成し、脱励起ガンマ線からそのエネルギー準位を測定した。また、陽子ノックアウトの運動量分布からClの基底状態がであることがわかった。その結果を大規模殻模型計算およびいくつかの第一原理計算と比較した。Cl同位体の基底状態および第一励起状態は、計算で用いた相互作用に敏感であることがわかった。それは、陽子の一粒子エネルギーと四重極集団運動との複雑な結合によるためであると考えられる。
Browne, F.*; Chen, S.*; Doornenbal, P.*; Obertelli, A.*; 緒方 一介*; 宇都野 穣; 吉田 数貴; Achouri, N. L.*; 馬場 秀忠*; Calvet, D.*; et al.
Physical Review Letters, 126(25), p.252501_1 - 252501_7, 2021/06
被引用回数:10 パーセンタイル:73.22(Physics, Multidisciplinary)理化学研究所RIビームファクトリーにて、中性子過剰核Scからの1陽子ノックアウト反応によってCaを生成し、そのエネルギー準位と反応断面積をガンマ線分光および不変質量分光によって得た。その結果を歪曲波インパルス近似による核反応計算と大規模殻模型による核構造計算を組み合わせた理論値と比較した。実験の準位と断面積は理論計算によってよく再現された。Caの正パリティ状態については、基底状態の生成断面積が励起状態のものに比べて圧倒的に大きいという結果が得られた。これは、Scでは中性子魔法数34が消滅しCaではその魔法数が存在するというこれまでの知見と一見矛盾するが、対相関による分光学的因子のコヒーレンスから理解することができる。
Juhsz, M. M.*; Elekes, Z.*; Sohler, D.*; 宇都野 穣; 吉田 数貴; 大塚 孝治*; 緒方 一介*; Doornenbal, P.*; Obertelli, A.*; 馬場 秀忠*; et al.
Physics Letters B, 814, p.136108_1 - 136108_8, 2021/03
被引用回数:5 パーセンタイル:62.78(Astronomy & Astrophysics)(,)反応と線分光を用いてArの束縛状態と非束縛状態の核構造研究を行った。実験結果と殻模型計算を比較することで、2つの束縛状態と6つの非束縛状態を決定した。Arの束縛状態を生成する反応断面積が小さいことから、これは中性子数32, 34の顕著なsub-shell closureが存在している確かな証拠と解釈できる。