Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kurita, Keisuke; Sakai, Takuro; Suzui, Nobuo*; Yin, Y.-G.*; Sugita, Ryohei*; Kobayashi, Natsuko*; Tanoi, Keitaro*; Kawachi, Naoki*
Japanese Journal of Applied Physics, 60(11), p.116501_1 - 116501_4, 2021/11
Times Cited Count:1 Percentile:7.45(Physics, Applied)Radioisotope tracer imaging is useful for studying plant physiological phenomena. In this study, we developed an autoradiography system with phosphor powder (ZnS:Ag), "Live-autoradiography", for imaging radioisotope dynamics in a living plant. This system visualizes the element migration and accumulation in intact plants continuously under a light environment. An imaging test was performed on point sources of Cs, with a radioactivity of 10-100 kBq of being observed; this indicates satisfactory system linearity between the image intensity and the radioactivity of Cs. Moreover, dynamics imaging of Cs was performed on an intact soybean plant for four days. The serial images indicated Cs accumulation in the node, vein, and growing point of the plant. The developed system can be used for studying plant physiological phenomena and can be employed for quantitative measurement of radionuclides.
Ichikawa, Shoichi; Chiba, Yusuke; Ono, Fumiyasu; Hatori, Masakazu; Kobayashi, Takanori; Uekura, Ryoichi; Hashiri, Nobuo*; Inuzuka, Taisuke*; Kitano, Hiroshi*; Abe, Hisashi*
JAEA-Research 2017-001, 40 Pages, 2017/03
In order to reduce the influence on a plant schedule of the MONJU by the maintenance of dew point hygrometers, The JAEA examined a capacitance type dew point hygrometer as an alternative dew point hygrometer for a lithium-chloride type dew point hygrometer which had been used at the CV-LRT in the MONJU. As a result of comparing a capacitance type dew point hygrometer with a lithium-chloride type dew point hygrometer at the CV-LRT (Atmosphere: nitrogen, Testing time: 24 hours), there weren't significant difference between a capacitance type dew point hygrometer and a lithium-chloride type dew point hygrometer. As a result of comparing a capacitance dew point hygrometer with a high-mirror-surface type dew point hygrometer for long term verification (Atmosphere: air, Testing time: 24 months), the JAEA confirmed that a capacitance type dew point hygrometer satisfied the instrument specification (2.04C) required by the JEAC4203-2008.
Ichikawa, Shoichi; Chiba, Yusuke; Ono, Fumiyasu; Hatori, Masakazu; Kobayashi, Takanori; Uekura, Ryoichi; Hashiri, Nobuo*; Inuzuka, Taisuke*; Kitano, Hiroshi*; Abe, Hisashi*
JAEA-Research 2016-021, 32 Pages, 2017/02
In order to reduce the influence on a plant schedule of the MONJU by the maintenance of dew point hygrometers, The JAEA examined a capacitance type dew point hygrometer as an alternative dew point hygrometer for a lithium-chloride type dew point hygrometer which had been used at the CV-LRT in the MONJU. As a result of comparing a capacitance type dew point hygrometer with a lithium-chloride type dew point hygrometer at the CV-LRT (Atmosphere: nitrogen, Testing time: 24 hours), there weren't significant difference between a capacitance type dew point hygrometer and a lithium-chloride type dew point hygrometer. As a result of comparing a capacitance dew point hygrometer with a high-mirror-surface type dew point hygrometer for long term verification (Atmosphere: air, Testing time: 24 months), the JAEA confirmed that a capacitance type dew point hygrometer satisfied the instrument specification (2.04C) required by the JEAC4203-2008.
Okuno, Mitsuru*; Nakamura, Toshio*; Geshi, Nobuo*; Kimura, Katsuhiko*; Kokubu, Yoko; Kobayashi, Tetsuo*
Nuclear Instruments and Methods in Physics Research B, 294, p.602 - 605, 2013/01
Times Cited Count:4 Percentile:32.87(Instruments & Instrumentation)We found numerous wood trunks from pumiceous deposits along Nagata, Isso and Miyanoura rivers on the northern side of Yakushima Island, 60 km south of Kyushu Island, and conducted radiocarbon dating using accelerator mass spectrometry (AMS). The obtained C dates were around 6500 BP, and geological characteristics of the pumiceous deposits indicate that these specimens were buried during the Kikai-Akahoya (K-Ah) eruption from the Kikai caldera. However, they are not charred, suggesting that the origin of these deposits is not of pyroclastic flow but that of tsunami. Fourteen taxa were identified through anatomical characteristics. This is the first discovery on species of the forest of the Yakushima Island before the devastating eruption.
Okazaki, Nobuo; Tamada, Taro; Feese, M. D.*; Kato, Masaru*; Miura, Yutaka*; Komeda, Toshihiro*; Kobayashi, Kazuo*; Kondo, Keiji*; Blaber, M.*; Kuroki, Ryota
Protein Science, 21(4), p.539 - 552, 2012/04
Times Cited Count:3 Percentile:6.63(Biochemistry & Molecular Biology)Sakaguchi, Shinobu; Tachibana, Ikuya; Koshino, Katsuhiko; Shirozu, Hidetomo; Shirai, Nobutoshi; Imamoto, Nobuo; Tomita, Tsuneo; Tobita, Hiroo; Yamanaka, Atsushi; Kobayashi, Daisuke; et al.
JAEA-Technology 2011-006, 24 Pages, 2011/03
In the Niigataken Chuetsu-oki Earthquake on 2007, observed earthquake motion exceeded design base at the Kashiwazaki Kariwa nuclear plant. However, there was no earthquake damage in safety important equipments to stop reactor, to cool reactor, and to contain radioactive materials. One of this reason is said that many safety margin are included in the design and the permissible value. To know more accurate safety margin, shearing force examinations for the base bolts were conducted. In examinations, delegate test-bolts were made; the test bolts were selected from heavier equipment in Tokai Reprocessing Plant. In this report, the shearing strength obtained from the examinations shows more accurate safety margin.
Kobayashi, Nobuo*; Sasaki, Shinichiro*; Tasaki, Keisuke*; Nakatsuka, Akira*; Nozawa, Shigeki; Hase, Yoshihiro; Narumi, Issei
JAEA-Review 2010-065, JAEA Takasaki Annual Report 2009, P. 67, 2011/01
Kobayashi, Nobuo*; Kano, Sayaka*; Sasaki, Shinichiro*; Tasaki, Keisuke*; Nakatsuka, Akira*; Nozawa, Shigeki; Hase, Yoshihiro; Narumi, Issei
JAEA-Review 2009-041, JAEA Takasaki Annual Report 2008, P. 77, 2009/12
Kobayashi, Nobuo*; Tasaki, Keisuke*; Kano, Sayaka*; Sakamoto, Sakiko*; Nakatsuka, Akira*; Hase, Yoshihiro; Narumi, Issei
JAEA-Review 2008-055, JAEA Takasaki Annual Report 2007, P. 70, 2008/11
no abstracts in English
Murakami, Tatsutoshi; Suzuki, Kiichi; Hatanaka, Nobuhiro; Hanawa, Yukio; Shinozaki, Masaru; Murakami, Shinichi; Tobita, Yoshimasa; Kawasaki, Takeshi; Kobayashi, Yoshihito; Iimura, Naoto; et al.
JAEA-Technology 2008-017, 97 Pages, 2008/03
Low density MOX pellets for FBR "MONJU" have not been fabricated in Plutonium Fuel Fabricating Facility (PFPF) for these 9 years since completion of the first reload fuel for "MONJU" in 1995. In this period, about 60 % of machines in the pellet fabrication process of PFPF have been replaced with new ones, and fabrication of MOX pellets for "JOYO" has been continued using these machines. Concerning the feed MOX powders for "MONJU", the amount of decay heat has been increased with increase of accumulated Am-241 in this period. In addition, powder characteristic of recycled MOX powder which is one of feed powders, MH-MOX powder, UO powder and recycled MOX powder, was significantly changed by replacing former processing machine used for scrap recycling with improved one. Using MOX powder with increased decay heat and recycled MOX powder processed by new machine, a series of low density MOX pellet fabrication tests were conducted to confirm pellet fabrication conditions for current pellet fabrication machines from October in 2004 to August in 2006. As a conclusion, it was confirmed that low density MOX pellets could be fabricated using these feed powders and replaced machines by adjusting pellet fabrication conditions adequately. This report summarizes the results of a series of low density MOX pellet fabrication tests.
Kobayashi, Nobuo*; Sakamoto, Sakiko*; Nakatsuka, Akira*; Hase, Yoshihiro; Narumi, Issei
JAEA-Review 2007-060, JAEA Takasaki Annual Report 2006, P. 87, 2008/03
no abstracts in English
Kobayashi, Nobuo*; Sakamoto, Sakiko*; Nakatsuka, Akira*; Hase, Yoshihiro; Yokota, Yuichiro
JAEA-Review 2006-042, JAEA Takasaki Annual Report 2005, P. 96, 2007/02
no abstracts in English
Kako, Eiji*; Noguchi, Shuichi*; Ouchi, Norihito*; Shishido, Toshio*; Tsuchiya, Kiyosumi*; Akaoka, Nobuo*; Chishiro, Etsuji; Hori, Toshihiko; Kobayashi, Hideki*; Nakata, Morihiro*; et al.
Physica C, 441(1-2), p.220 - 224, 2006/07
Times Cited Count:0 Percentile:0(Physics, Applied)A prototype cryomodule containing two 9-cell superconducting cavities of =0.725 and =972 MHz had been constructed under the collaboration of Japan Atomic Energy Research Institute (JAERI) and High Energy Accelerator Research Organization (KEK) on the development of superconducting LINAC for Accelerator Driven System (ADS). Cool-down tests to 2 K of the cryomodule and high power rf tests with a 972 MHz pulsed klystron have been carried out. Rf power of 350 kW in pulsed operation of 3 msec and 25 Hz was transferred to a nine-cell cavity through an input coupler. Accelerating gradients of 14 MV/m (compared to the specification of 10 MV/m) have been achieved in both cavities. Compensation of Lorentz-force detuning by a piezo tuner was successfully demonstrated.
Kako, Eiji*; Noguchi, Shuichi*; Ouchi, Norihito*; Shishido, Toshio*; Tsuchiya, Kiyosumi*; Akaoka, Nobuo; Chishiro, Etsuji; Hori, Toshihiko; Kobayashi, Hideki*; Nakata, Morihiro*; et al.
Proceedings of 2nd Annual Meeting of Particle Accelerator Society of Japan and 30th Linear Accelerator Meeting in Japan, p.191 - 193, 2005/07
no abstracts in English
Kako, Eiji*; Noguchi, Shuichi*; Ouchi, Norihito*; Shishido, Toshio*; Tsuchiya, Kiyosumi*; Akaoka, Nobuo*; Chishiro, Etsuji; Hori, Toshihiko; Kobayashi, Hideki*; Nakata, Morihiro*; et al.
Proceedings of 2005 Particle Accelerator Conference (PAC '05) (CD-ROM), p.3579 - 3581, 2005/00
no abstracts in English
Yachi, Shigeyasu; Nakamura, Jinichi; Amaya, Masaki; Nakajima, Kunihisa; Komuro, Yuichi; Nakajima, Katsuaki*; Kobayashi, Yasuhiko; Sato, Tadashi*; Suga, Shinichi*; Noguchi, Hiroshi; et al.
JAERI-Review 2004-020, 61 Pages, 2004/09
This report provides an example of answers to the problems of the 36th Examination for the Chief Engineer of Nuclear Fuel. This examination was done as a national qualification in March 2004. Brief explanations or references are added to some answers.
Kako, Eiji*; Noguchi, Shuichi*; Ouchi, Norihito*; Shishido, Toshio*; Akaoka, Nobuo*; Kobayashi, Hideki*; Ouchi, Nobuo; Ueno, Tomoaki*; Hara, Hiroshi*; Matsuoka, Masanori*; et al.
Proceedings of 9th European Particle Accelerator Conference (EPAC 2004) (CD-ROM), p.1042 - 1044, 2004/07
no abstracts in English
Ouchi, Norihito*; Kako, Eiji*; Noguchi, Shuichi*; Shishido, Toshio*; Tsuchiya, Kiyosumi*; Akaoka, Nobuo*; Kobayashi, Hideki*; Ouchi, Nobuo; Ueno, Tomoaki*; Hara, Hiroshi*; et al.
Proceedings of 9th European Particle Accelerator Conference (EPAC 2004), p.1033 - 1035, 2004/00
no abstracts in English
Hatsukawa, Yuichi*; Shinohara, Nobuo*; Hata, Kentaro*; Kobayashi, Katsunori*; Motoishi, Shoji*; Tanase, Masakazu*; Kato, Toshio; Nakamura, Shoji; Harada, Hideo
Journal of Radioanalytical and Nuclear Chemistry, 239(3), p.455 - 458, 1999/03
Times Cited Count:2 Percentile:21.16(Chemistry, Analytical)no abstracts in English
Nishihara, Kenji*; Kobayashi, Keisuke*; Otani, Nobuo
Journal of Nuclear Science and Technology, 36(3), p.265 - 272, 1999/00
Times Cited Count:1 Percentile:13.12(Nuclear Science & Technology)