Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, R.*; Su, Y. H.; Ao, N.*; Li, Z. W.*; 篠原 武尚; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 202, p.109233_1 - 109233_16, 2026/01
The surface induction-hardened S38C medium carbon steel shows a good balance of strength and toughness, but complicates the evaluation of fatigue resistance, mainly because of gradient residual stress (RS) and grains. An integrated fatigue resistance assessment (AIFA) framework was proposed to consider the residual stress relief under stochastic loads. To this end, quasi-in situ neutron diffraction and Bragg-edge imaging were combined to probe the evolution of residual stress during crack propagation. Firstly, a rigid-flexible coupled vehicle dynamics model was adopted to obtain the time-domain variable amplitude loading spectrum. Then, Fortran subroutines were developed to assign these data into full-scale S38C axle model, and the remaining life was predicted using the damage tolerance approach. The results demonstrate that crack propagation would accelerate when residual stress is considered in the case of the crack depth exceeding 3.0 mm. It is, for the first time, found that 15 mm- and 5 mm-thickness fan-shaped specimens can retain the axial and hoop residual strain in terms of diffraction angle variation, respectively, for full-scale structural S38C steel axles. In the absence of RS, the remaining life of the axle decreases sharply from 624,800 to 51,300 km as the crack depth increases from 3.0 to 16 mm. Compared with the standard method under constant amplitude loading without residual stress relief, the present AIFA method provides the more accurate but conservative fatigue life prediction.
magnetic orderings in a triangular lattice; Implications for multi- orderings in general two-dimensional latticesPark, P.*; Cho, W.*; Kim, C.*; An, Y.*; 飯田 一樹*; 梶本 亮一; Matin, S.*; Zhang, S.-S.*; Batista, C. D.*; Park, J.-G.*
Physical Review X, 15(3), p.031032_1 - 031032_29, 2025/07
Multi- magnetic structures on two-dimensional (2D) lattices provide a key route to realizing topological physics in 2D magnetism. A major experimental challenge is to unambiguously confirm their formation by excluding the possibility of topologically trivial multi-domain single- or double- magnetic orders, which cannot be distinguished using conventional diffraction techniques. Here, we propose that long-wavelength spin dynamics offers a universal diagnostic for triangular lattices: triple- orders that preserve rotational symmetry and single- or double- orders that break it exhibit qualitatively distinct anisotropies in their Goldstone mode velocities, stemming from fundamental differences in their underlying spin configurations. We validate this concept using the metallic triangular-lattice antiferromagnet Co
TaS
, which hosts both a stripe-type single- state and a triple- tetrahedral ordering at different temperatures. Using inelastic neutron-scattering and spin dynamics simulations, we first refine the spin Hamiltonian by fitting the paramagnetic excitation spectra, allowing us to develop an unbiased model independent of magnetic ordering. We then show that the observed velocity profiles of the Goldstone modes agree with the high-temperature model's predictions: markedly anisotropic for the single- phase and near isotropic for the triple- phase. Importantly, this contrast persists across various exchange parameters, highlighting its model-independent nature and suggesting potential applicability to other 2D lattice systems. Beyond the long-wavelength regime, we present a substantial discrepancy between the measured and simulated magnon spectra exclusively in the triple- phase. We attribute this discrepancy to magnon energy renormalization arising from order-of-magnitude-enhanced magnon-magnon interactions in the triple- phase, due to its noncollinear configuration. This work provides universal insight into the dynamical properties of topological multi- magnetic orderings in 2D lattice structures, offering a broadly applicable diagnostic to distinguishing them from topologically trivial single- or double- counterparts. The unequivocal confirmation of the triple- structure in CoTaS further establishes it as a prominent material platform for exploring topological spin textures in the genuine 2D limit.
Zhang, Y.-J.*; 梅田 岳昌*; 諸岡 聡; Harjo, S.; 宮本 吾郎*; 古原 忠*
Metallurgical and Materials Transactions A, 55(10), p.3921 - 3936, 2024/10
被引用回数：1 パーセンタイル：0.00(Materials Science, Multidisciplinary)In this study, a series of eutectoid steels with Mn addition up to 2 mass% were isothermally transformed at various temperatures from 873 K to 973 K to clarify the pearlite growth kinetics and the underlying thermodynamics at its growth front. The microscopic observation indicates the acceleration in pearlite growth rate and refinement in lamellar spacing by decreasing the transformation temperature or the amount of Mn addition. After analyzing the solute distribution at pearlite growth front via three-dimensional atom probe, no macroscopic Mn partitioning across pearlite/austenite interface is detected, whereas Mn segregation is only observed at ferrite/austenite interface. Furthermore, in-situ neutron diffraction measurements performed at elevated temperatures reveals that the magnitude of elastic strain generated during pearlite transformation is very small.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, H.*; Zhou, L.*; Ao, N.*; Su, Y. H.; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 185, p.108336_1 - 108336_13, 2024/08
被引用回数：11 パーセンタイル：90.11(Engineering, Mechanical)Gradient distribution of triaxial residual stresses to a depth of several millimeters is retained in middle carbon steel S38C axles after high-frequency induction hardening, which has become a critical concern for fatigue structural integrity. To address this, the axial, hoop, and radial gradient residual strains inside the axles were measured for the first time by advanced neutron diffraction. The SIGINI Fortran subroutine was then adopted to reconstruct the global initial residual stress field from the measured data. Experimental and simulation results show that residual stresses of about -520 MPa (axial), -710 MPa (hoop), and -40 MPa (radial) residual stress were retained below the axle surface. Subsequently, the fatigue crack propagation behavior of S38C axles was numerically investigated in the framework of fracture mechanics. The calculated results clearly show that the compressive residual stresses at a depth of 0?3 mm from the axle surface lead to a low crack growth driving force, and that fatigue cracks do not propagate as long as the crack depth is less than 3.7 mm for hollow S38C axles. These results further indicate that the maximum defect size allowed in routine inspections is acceptable from a safety and economic point of view. Accurate measurement and characterization of the global gradient residual stress field through experiments and simulations can provide an important reference for optimizing the mileage intervals of nondestructive testing (NDT) of surface defects in these surface-strengthened railway axles.
渡邊 未来*; 宮本 吾郎*; Zhang, Y.*; 諸岡 聡; Harjo, S.; 小林 康浩*; 古原 忠*
ISIJ International, 64(9), p.1464 - 1476, 2024/07
被引用回数：4 パーセンタイル：62.38(Metallurgy & Metallurgical Engineering)The mechanical properties of TRIP steels depend on heterogeneities of chemical composition and grain size in the retained 
structure, although these heterogeneities have not been characterized in detail. Therefore, in this study, we quantitatively investigate the inhomogeneous carbon concentration and grain size distribution, and its effects on the thermal stability of the retained in Fe-2Mn-1.5Si-0.4C (mass%) TRIP steel using FE-EPMA, EBSD, M
ssbauer spectroscopy, and in-situ neutron diffraction during bainitic transformation at 673 K. In-situ neutron diffraction experiments detects high-carbon evolving during bainite transformation, in addition to the original , and the time variation of the volume fraction of highcarbon agrees well with the fraction of retained at room temperature. Williamson-Hall analysis based on peak width suggests that heterogeneity of carbon content exists even within the high-carbon . Compositional analysis using FE-EPMA and three-dimensional atom probe directly revealed that fine filmy was highly enriched with carbon compared to larger blocky , and the carbon content in blocky decreases with increasing blocky size. DICTRA simulation qualitatively reproduces the size dependency of carbon enrichment into . It was also found that tends to be retained at higher carbon content and smaller grain size since the smaller grain size directly improves thermal stability and the smaller size further contributes to the thermal stability via enhanced carbon enrichment.
Zeng, Z.*; Zhou, C.*; Zhou, H.*; Han, L.*; Chi, R.*; Li, K.*; 古府 麻衣子; 中島 健次; Wei, Y.*; Zhang, W.*; et al.
Nature Physics, 20(7), p.1097 - 1102, 2024/07
被引用回数：20 パーセンタイル：96.58(Physics, Multidisciplinary)Emergent quasiparticles with a Dirac dispersion in condensed matter systems can be described by the Dirac equation for relativistic electrons, in analogy with Dirac particles in high-energy physics. For example, electrons with a Dirac dispersion have been intensively studied in electronic systems such as graphene and topological insulators. However, charge is not a prerequisite for Dirac fermions, and the emergence of Dirac fermions without a charge degree of freedom has been theoretically predicted to be realized in Dirac quantum spin liquids. These quasiparticles carry a spin of 1/2 but are charge-neutral and so are called spinons. Here we show that the spin excitations of a kagome antiferromagnet, YCu
(OD)
Br
[Br
(OD)
], are conical with a spin continuum inside, which is consistent with the convolution of two Dirac spinons. The predictions of a Dirac spin liquid model with a spinon velocity obtained from spectral measurements are in agreement with the low-temperature specific heat of the sample. Our results, thus, provide spectral evidence for a Dirac quantum spin liquid state emerging in this kagome lattice antiferromagnet. However, the locations of the conical spin excitations differ from those calculated by the nearest-neighbor Heisenberg model, suggesting the Dirac spinons have an unexpected origin.
Li, L.*; 宮本 吾郎*; Zhang, Y.*; Li, M.*; 諸岡 聡; 及川 勝成*; 友田 陽*; 古原 忠*
Journal of Materials Science & Technology, 184, p.221 - 234, 2024/06
被引用回数：8 パーセンタイル：66.49(Materials Science, Multidisciplinary)Dynamic transformation (DT) of austenite () to ferrite (
) in the hot deformation of various carbon steels was widely investigated. However, the nature of DT remains unclear due to the lack of quantitative analysis of stress partitioning between two phases and the uncertainty of local distribution of substitutional elements at the interface in multi-component carbon steels used in the previous studies. Therefore, in the present study, a binary Fe-Ni alloy with + duplex microstructure in equilibrium was prepared and isothermally compressed in + two-phase region to achieve quantitative analysis of microstructure evolution, stress partitioning and thermodynamics during DT. to DT during isothermal compression and to reverse transformation on isothermal annealing under unloaded condition after deformation were accompanied by Ni partitioning. The lattice strains during thermomechanical processing were obtained via in-situ neutron diffraction measurement, based on which the stress partitioning behavior between and was discussed by using the generalized Hooke's law. A thermodynamic framework for the isothermal deformation in solids was established based on the basic laws of thermodynamics, and it was shown that the total Helmholtz free energy change in the deformable material during the isothermal process should be smaller than the work done to the deformable material. Under the present thermodynamic framework, the microstructure evolution in the isothermal compression of Fe-14Ni alloy was well explained by considering the changes in chemical free energy, plastic and elastic energies and the work done to the material. In addition, the stabilization of the soft phase in Fe-14Ni alloy by deformation was rationalized since the to transformation decreased the total Helmholtz free energy by decreasing the elastic and dislocation energies.
Liao, J.*; Huang, Z.*; Shangguan, Y.*; Zhang, B.*; Cheng, S.*; Xu, H.*; 梶本 亮一; 蒲沢 和也*; Bao, S.*; Wen, J.*
Physical Review B, 109(22), p.224411_1 - 224411_10, 2024/06
被引用回数：0 パーセンタイル：0.00(Materials Science, Multidisciplinary)Antiferromagnetic van der Waals family 
P
( = Fe, Mn, Co, and Ni; 
= S and Se) have attracted significant research attention due to the possibility of realizing long-range magnetic order down to the monolayer limit. Here, we perform inelastic neutron scattering measurements on single-crystal samples of MnPSe, a member of the P family, to study the spin dynamics and determine the effective spin model. The excited magnon bands are well characterized by a spin model, which includes a Heisenberg term with three intraplane exchange parameters (
meV, 
meV, 
meV) and one interplane parameter (
meV), and an easy-plane single-ion anisotropy term (
meV). Additionally, we observe the intersection of the magnon and phonon bands but no anomalous spectral features induced by the formation of magnon-phonon hybrid excitations at the intersecting region. We discuss possible reasons for the absence of such hybrid excitations in MnPSe.
Guo, B.*; Chen, H.*; Chong, Y.*; Mao, W.; Harjo, S.; Gong, W.; Zhang, Z.*; Jonas, J. J.*; 辻 伸泰*
Acta Materialia, 268, p.119780_1 - 119780_11, 2024/04
被引用回数：12 パーセンタイル：91.50(Materials Science, Multidisciplinary)This paper focused on the characterization and mechanism of the dynamic transformation from the alpha to beta phase during the hot deformation of Ti-6Al-4V alloy and pure titanium. The investigation employed in-situ neutron diffraction and atomistic simulations for a comprehensive understanding of the process. Dynamic transformations were observed during deformation of the Ti-6Al-4V alloy and pure titanium below the beta transus temperatures. During isothermal holding after unloading, the in-situ neutron diffraction results for Ti-6Al-4V and pure titanium indicated a sluggish reverse transformation from the beta to alpha phase. The mechanism of dynamic transformation was explored through in-situ neutron diffraction and atomistic simulations, which revealed twofold effects of deformation on dynamic transformation. Firstly, deformation led to a significant rise in the Gibbs energy of the alpha phase relative to the beta phase, expanding the beta phase region and diminishing the alpha phase region. Secondly, deformation lowered the energy barriers associated with dynamic transformation, facilitating the activation of dynamic transformation more readily than in the equilibrium state before deformation.
Liss, K.-D.*; 徐 平光; 城 鮎美*; Zhang, S. Y.*; 行武 栄太郎*; 菖蒲 敬久; 秋田 貢一*
Advanced Engineering Materials, 26(4), p.202300470_1 - 202300470_9, 2024/02
被引用回数：7 パーセンタイル：50.73(Materials Science, Multidisciplinary)In polycrystals, grains with certain orientations grow at high temperatures at the expense of grains with other unfavorable orientations. Grain growth involves a variety of situations and mechanisms that make experimental study, modeling, and understanding extremely complex. Normal grain growth occurs in a self-similar manner, with curved grain boundaries serving as the driving force and a parabolic growth law that scales up the grain size by the square root of time. More complex growth forms include boundary pinning of precipitates and other boundaries, topological transitions that alter driving forces, grain coalescence and anomalous grain growth, but these are considered "erratic" and their initiation is an open question in modern research, without a simple experimental approach on how they should be studied. Here, we show that grain rotation upon coalescence is spontaneously activated between one grain and a favorable neighbor, through the necessary diffusive mass transport at further boundaries of the same grain leading to their activation and a competitive "erratic" reorientation in a zigzag way, while other grains in the matrix remain stable. After two grains have eventually coalesced, their surrounding boundaries are still activated leading to further rotation and growth, filling the missing puzzle stone in thermodynamic theory between normal and abnormal growth, the latter stating that abnormal growth only takes place when the size of the growing grain is already large. Prerequisites and postulates of abnormal grain growth are based on advantageous texture, grain boundary mobility, enhanced diffusion kinetics and coalescence, which can be well explained by our observations. Moreover, our observations have been enabled through a novel experimental approach using the white-beam X-ray Laue diffraction method in bulk transmission mode on a polycrystalline.
Zhang, Y.*; 丸澤 賢人*; 工藤 航平*; 諸岡 聡; Harjo, S.; 宮本 吾郎*; 古原 忠*
ISIJ International, 64(2), p.245 - 256, 2024/01
被引用回数：3 パーセンタイル：48.39(Metallurgy & Metallurgical Engineering)As-quenched martensite in carbon steels needs to be tempered to restore its ductility and toughness for practical applications. During tempering of martensite, microstructural evolutions induced by a series of reactions relevant to carbon diffusion is known to occur. In this study, multi-aspect characterization using advanced techniques such as in-situ neutron diffraction, transmission electron microscopy and three-dimensional atom probe tomography, was performed to investigate the changes in tetragonality, physical properties, microstructure and solute carbon content in high-carbon martensite, with an aim to clarify its low-temperature tempering behaviors. A binary alloy with a chemical composition of Fe-0.78 mass%C was austenitized and quenched to prepare the as-quenched martensite, followed by tempering in continuous heating at different heating rates. It was found that various reactions occurred sequentially during tempering, starting from the structure modulation generated by carbon clustering in the 0th stage, then followed by the precipitation of metastable 
-carbide particles on linear features in the 1st stage, towards the later decomposition of retained austenite and precipitation of cementite in the 2nd and 3rd stages, respectively. After analyzing the experimental results, the solute carbon content in martensite tempered under various conditions was found to be in good agreement with that estimated from the lattice volume expansion, whereas the evaluation based on the tetragonality might lead to some underestimation of the solute carbon content in martensite tempered at high temperatures.
Yu, C.*; 川北 至信; 菊地 龍弥*; 古府 麻衣子*; 本田 孝志*; Zhang, Z.*; Zhang, Z.*; Liu, Y.*; Liu, S. F.*; Li, B.*
Journal of Physical Chemistry Letters (Internet), 15(1), p.329 - 338, 2024/01
被引用回数：1 パーセンタイル：0.00(Chemistry, Physical)The atomic dynamic behaviors of formamidinium lead iodide [HC(NH)PbI] are critical for understanding and improving photovoltaic performances. However, they remain unclear. Here, we investigate the structural phase transitions and the reorientation dynamics of the formamidinium cation [HC(NH)
, FA
] of FAPbI using neutron scattering techniques. Two structural phase transitions occur with decreasing temperature, from cubic to tetragonal phase at 285 K and then to another tetragonal at 140 K, accompanied by gradually frozen reorientation of FA cations. The nearly isotropic reorientation in the cubic phase is suppressed to reorientation motions involving a two-fold (C) rotation along the 
axis and a four-fold (C
) rotation along the C-H axis in the tetragonal phase, and eventually to local disordered motion as a partial C along the C-H axis in another tetragonal phase, thereby indicating an intimate interplay between lattice and orientation degrees of freedom in the hybrid perovskite materials. The present complete atomic structure and dynamics provide a solid standing point to understand and then improve photovoltaic properties of organic-inorganic hybrid perovskites in the future.
徐 平光; Zhang, S.-Y.*; Harjo, S.; Vogel, S. C.*; 友田 陽*
Quantum Beam Science (Internet), 8(1), p.7_1 - 7_13, 2024/01
Comprehensive information about the 
microstructure and crystal structure evolution during the preparation/production processes of various materials is in great demand in order to precisely control the microstructure morphology and the preferred orientation characteristics for the excellent strength-ductility-toughness balance of advanced engineering materials. 
isothermal annealing experiments of cold rolled 17Ni-0.2C (mass %) martensitic steel sheets were carried out by using the TAKUMI and ENGIN-X time-of-flight neutron diffractometers, respectively. The inverse pole figures based on full-profile refinement were extracted to roughly evaluate the preferred orientation features along three principal sample directions of investigated steel sheets using the General Structure Analysis System (GSAS) software with built-in generalized spherical harmonic functions. The consistent rolling direction (RD) inverse pole figures from TAKUMI and ENGIN-X have confirmed that the time-of-flight neutron diffraction has high repeatability and statistical reliability, revealing that the principal preferred orientation evaluation of steel materials is available through 90
TD 
ND (transverse direction normal direction) rotation of the investigated specimen on the sample stage during two neutron diffraction experiments. Moreover, these RD, TD and ND inverse pole figures before and after in situ experiments were compared with the corresponding inverse pole figures recalculated respectively from the MUSASI-L complete pole figure measurement and the HIPPO in situ microstructure evaluation. The similar orientation distribution characteristics suggested that the principal preferred orientation evaluation method can be applied to in situ microstructure evolution of bulk orthorhombic materials and spatially resolved principal preferred orientation mappings of large engineering structure parts.
TaSPark, P.*; Cho, W.*; Kim, C.*; An, Y.*; Kang, Y.-G.*; Avdeev, M.*; Sibille, R.*; 飯田 一樹*; 梶本 亮一; Lee, K. H.*; et al.
Nature Communications (Internet), 14, p.8346_1 - 8346_9, 2023/12
被引用回数：28 パーセンタイル：87.00(Multidisciplinary Sciences)The triangular lattice antiferromagnet (TLAF) has been the standard paradigm of frustrated magnetism for several decades. The most common magnetic ordering in insulating TLAFs is the 120 structure. However, a new triple- chiral ordering can emerge in metallic TLAFs, representing the short wavelength limit of magnetic skyrmion crystals. We report the metallic TLAF CoTaS as the first example of tetrahedral triple- magnetic ordering with the associated topological Hall effect (non-zero 
). We also present a theoretical framework that describes the emergence of this magnetic ground state, which is further supported by the electronic structure measured by angle-resolved photoemission spectroscopy. Additionally, our measurements of the inelastic neutron scattering cross section are consistent with the calculated dynamical structure factor of the tetrahedral triple- state.
Yang, D. S.*; Wu, Y.*; Kanatzidis, E. E.*; Avila, R.*; Zhou, M.*; Bai, Y.*; Chen, S.*; 関根 由莉奈; Kim, J.*; Deng, Y.*; et al.
Materials Horizons, 10(11), p.4992 - 5003, 2023/09
被引用回数：21 パーセンタイル：81.27(Chemistry, Multidisciplinary)本論文では、ハード及びソフトハイブリッド材料システムでの3Dプリントによって形成されたマイクロ流体ネットワーク、統合バルブ、およびマイクロスケール光学キュベットにより、汗成分に対してその場で分光および蛍光分析した成果を紹介する。一連の試験により、これらのマイクロキュベットシステムが汗中の銅、塩化物、グルコースの濃度と汗のpHを実験室レベルの精度と感度で評価できることが実証された。
Esser, S. P.*; Rahlff, J.*; Zhao, W.*; Predl, M.*; Plewka, J.*; Sures, K.*; Wimmer, F.*; Lee, J.*; Adam, P. S.*; McGonigle, J.*; et al.
Nature Microbiology (Internet), 8(9), p.1619 - 1633, 2023/09
被引用回数：10 パーセンタイル：79.43(Microbiology)CRISPR-Cas systems defend prokaryotic cells from viruses, plasmids, and other mobile genetic elements. Capitalizing on multi-omics approaches, we show here that the CRISPR-Cas systems of uncultivated archaea also play an integral role in mitigating potentially detrimental interactions with episymbionts. A comprehensive analysis of CRISPR-Cas-based infection histories revealed that uncultivated deep-subsurface archaeal primary-producers defend themselves from archaeal episymbionts of the DPANN superphylum of archaea, some of which are known to fuse their membranes with their host. We show that host cells counter these attacks by deploying one of two CRISPR-Cas systems (type I-B and type III-A) to target and disrupt essential genes in the episymbiont. However, genome-scale modeling of metabolic interactions between two deep subsurface host-symbiont systems revealed that host cells also benefit from the symbionts via metabolic complementation. We speculate that populations of these uncultivated archaeal episymbionts are currently transitioning from a parasitic lifestyle to one of mutualism, as must have occurred in countless mutualistic systems known today. By expanding our analysis to thousands of archaeal genomes, we conclude that CRISPR-Cas mediated resistance to archaeal episymbiosis evolved independently in various archaeal lineages and may be a wide-spread evolutionary phenomenon.
neutron diffraction study on the deformation behavior of the plastic inorganic semiconductor AgSWang, Y.*; Gong, W.; 川崎 卓郎; Harjo, S.; Zhang, K.*; Zhang, Z. D.*; Li, B.*
Applied Physics Letters, 123(1), p.011903_1 - 011903_6, 2023/07
被引用回数：4 パーセンタイル：44.19(Physics, Applied)Bulk AgS is a plastic inorganic semiconductor at room temperature. It exhibits a compressive strain greater than 50%, which is highly different from brittle conventional counterparts, such as silicon. Here, we present the experimental investigation of the deformation behavior in a plastic inorganic semiconductor AgS using neutron diffraction during compressive deformation at room and elevated temperatures. At room temperature, the lattice strain partitioning among 
-orientated grain families could be responsible for the significant work-hardening behavior in the bulk AgS with a monoclinic structure. The rapid accumulation of lattice defects and remarkable development of the deformation texture suggest that dislocation slip promotes plasticity. At 453 K, a monoclinic phase transforms into a body-centered cubic phase. A stress plateau appears at 
-4.8 MPa, followed by a rehardening state. The deformation mode of bulk AgS at the initial stage is likely attributable to the migration of silver ions, and as strain increases, it is closer to that of room temperature, leading to rehardening.
Ao, N.*; Zhang, H.*; Xu, H. H.*; Wu, S. C.*; Liu, D.*; 徐 平光; Su, Y. H.; Kang, Q. H.*; Kang, G. Z.*
Engineering Fracture Mechanics, 281, p.109166_1 - 109166_14, 2023/03
被引用回数：14 パーセンタイル：81.72(Mechanics)Considering the complex service environments that high-speed railway axles are subjected to, the fatigue crack growth (FCG) behavior of a structurally gradient axle steel with different pre-crack depths both in air and corrosive medium was investigated at a frequency of 5 Hz. The results indicated that in the high 
region, FCG rate was dramatically accelerated by corrosion, but the gap narrows as decreased. The accelerated corrosion FCG rate was a comprehensive result of the acceleration effect of the anodic dissolution, hydrogen-enhanced localized plasticity and the retardation effect of corrosion-induced crack-tip blunting. Despite the fact that the corrosion resistance gradually decreased as the pre-crack depth increased, the FCG rate in the corrosive medium gradually decreased. This was because fatigue loading played a more important role than corrosion in accelerating the corrosion FCG rate.
Chong, Y.*; Gholizadeh, R.*; 都留 智仁; Zhang, R.*; 井上 耕治*; Gao, W.*; Godfrey, A.*; 光原 昌寿*; Morris, J. W. Jr.*; Minor, A. M.*; et al.
Nature Communications (Internet), 14, p.404_1 - 404_11, 2023/02
被引用回数：56 パーセンタイル：97.38(Multidisciplinary Sciences)チタンは格子間酸素によって脆化する。特に極低温では顕著な脆化挙動を示すため、チタンやその合金の製造において酸素含有量を厳しく管理する必要がある。この問題を解決するために、我々は結晶粒の微細化という構造戦略を提案した。77Kで非常に脆い粗粒の組織と比較して、Ti-0.3wt.%Oの超微細粒(UFG)組織(粒径2.0
m)は、UFG組織特有の超高降伏強度を維持したまま均一延びを1桁上昇させることに成功した。UFG Ti-0.3wt.%Oにおけるこの特異な強度-延性相乗効果は、粒界凝集エネルギー向上に寄与する希薄な酸素の粒界偏析と優れたひずみ硬化能に寄与する
転位の活性化の複合効果によって達成された。この方法は、低温での高強度Ti-O合金の応用の可能性を高めるだけでなく、格子間固溶硬化による延性の低下を生じる他の合金系にも適用できる可能性がある。
Chen, J.*; 山本 慧; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Liu, S.*; Gao, P.*; Yu, D.*; et al.
Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02
被引用回数：6 パーセンタイル：59.15(Physics, Applied)Coherent coupling in magnon based hybrid system has many potential applications in quantum information processing. Magnons can propagate in magnetically ordered materials without any motion of electrons, offering a unique method to build low-power-consumption devices and information channels free of heat dissipation. In this article, we demonstrate the coherent propagation of hybridized modes between spin waves and Love surface acoustic waves in a multiferroic BiFeO and ferromagnetic LaSrMnO based heterostructure. The magneto-elastic coupling enables a giant enhancement of strength of the hybridized mode by a factor of 26 compared to that of the pure spin waves. A short wavelength down to 250 nm is demonstrated for the hybridized mode, which is desirable for nanoscale acousto-magnonic applications. Our combined experimental and theoretical analyses represent an important step towards the coherent control in hybrid magnonics, which may inspire the study of magnon-phonon hybrid systems for coherent information processing and manipulation.
