Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
*; *; *; Suzuki, Tatsuya*; *; *;
JNC-TY9400 2000-009, 41 Pages, 2000/03
JNC-TY9400-2000-009.pdf:1.22MB
no abstracts in English
Uwaba, Tomoyuki
JNC-TN9420 2000-005, 28 Pages, 2000/03
JNC-TN9420-2000-005.pdf:0.94MB
In the first phase of the feasibility study, their basic objectives are presentating the feasible image and scenario of development of the FBR cycle system, which is composed of the fast reactor, spent fuel reprocessing and fuel manufacturing facility. In the development of the FBR system in this phase, various ideas of plants are to be studied, which include coolant types such as sodium, heavy metals, gases(CO
, He), wator, and middle or small size of the reactor, and fuel types (MOX, metal and nitride). In this report, as a part of this study, materials used for the core of the helium gas cooled reactor and their integrity (corrosion, mechanical and irradiation property) under high temperature helium atmosphere were investigated from open literatures.
Akashi, Masatsune*; Fukaya, Yuichi*; Asano, Hidekazu*
JNC-TJ8400 2000-015, 46 Pages, 2000/02
JNC-TJ8400-2000-015.pdf:2.01MB
Difference of hydrogen generation phenomena on the surface of the Steels were not observed between carbon steel, atmospheric corrosion resisting steel and 5%-Ni steel. Rust layer was formed on these three-type of steels by steam oxidation method. And the chemical composition of the rust for the steels were basically two (2) layers structure for the previous two steels as hematite (FeO
) based for the outer layer and magnetite (FeO
) based for the inner layer. And for the last steel, it had three (3) layer in the rust as hematite (FeO) based for the outer layer, magnetite (FeO) based for the intermediate layer and Ni based layer for the inner layer. These steels showed mostly same Tafel gradient in their cathodic polarization curves compare with that for no rust specimens. However, the exchange current density which reaction is assumed as a hydrogen generation reaction was largely increased. The cathodic reaction for each steels whose surface is covered by magnetite layer might be accelerated, then the corrosion rate was considered as accelerated, too.
Akashi, Masatsune*; Fukaya, Yuichi*; Asano, Hidekazu*
JNC-TJ8400 2000-014, 22 Pages, 2000/02
JNC-TJ8400-2000-014.pdf:0.75MB
Difference of hydrogen generation phenomena on the surface of the Steels were not observed between carbon steel, atmospheric corrosion resisting steel and 5%-Ni steel. Rust layer was formed on these three-type of steels by steam oxidation method. And the chemical composition of the rust for the steels were basically two(2) layers structure for the previous two steels as hematite(FeO) based for the outer layer and magnetite(FeO) based for the inner layer. And for the last steel, it had three(3) layer in the rust as hematite(FeO) based for the outer layer, magnetite(FeO) based for the intermediate layer and Ni based layer for the inner layer. These steels showed mostly same Tafel gradient in their cathodic polarization curves compare with that for no rust specimens. However, the exchange current density which reaction is assumed as a hydrogen generation reaction was largely increased. The cathodic reaction for each steels whose surface is covered by magnetite layer might be accelerated, then the corrosion rate was considered as accelerated, too.