Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Saito, Shigeru; Yamaguchi, Kazushi*; Yoshimoto, Hidemitsu*; Obayashi, Hironari; Sasa, Toshinobu
JAEA-Technology 2022-032, 51 Pages, 2023/03
JAEA-Technology-2022-032.pdf:4.51MB
In the Accelerator Driven System (ADS) being studied by the Japan Atomic Energy Agency (JAEA) for transmutation of long-lived radioactive waste, lead-bismuth eutectic alloy (LBE) is used as a spallation target and subcritical core coolant. A proton irradiation facility in J-PARC is considered to prepare a material irradiation database for ADS development. The proton irradiation facility is equipped with an LBE loop, which enables material irradiation tests in spallation environment under flowing LBE condition. The slow leakage of LBE is one of critical issue to use LBE safety. The slow leakage is caused by the biting slag and/or other materials at valve seal of drain valve. To solve this problem, JAEA examined the application of freeze-seal valve (FSV), which seal the piping by freezing LBE in specific position. Water-cooled and air-cooled freeze-seal valve test modules were fabricated, installed in the test section of the existing test stand for LBE technology development, and tested to confirm their operation and performance. As a result of the tests, it was confirmed that the water-cooled FSV test module worked well along to the design values. This report describes the outline and details of the test stand for LBE technology and each FSV test module, as well as the results of operation and performance verification tests.
Obayashi, Hironari; Yamaki, Kenichi*; Yoshimoto, Hidemitsu*; Kita, Satoshi*; Wan, T.*; Sasa, Toshinobu
JAEA-Technology 2021-035, 66 Pages, 2022/03
JAEA-Technology-2021-035.pdf:4.26MB
Construction of Transmutation Experimental Facility (TEF) is under planning in Japan Proton Accelerator Research Complex (J-PARC) program to promote R&Ds on realization of transmutation technology by an accelerator driven system (ADS). As a facility of TEF, ADS Target Test Facility (TEF-T) will provide a spallation target to study target technology and perform post irradiation examination (PIE) of candidate materials of ADS. In ADS, lead-bismuth eutectic (LBE) alloy is used as a spallation target material and a core coolant. As is well known, LBE has corrosive to structural materials hence each component of the target system should provide compatibility with LBE. In addition, instrumentations for LBE are restricted by the target operation condition such as high temperature and irradiation environment. The devices for LBE have been developed individually to achieve the LBE target system. "Integrated Multi-functional MOckup for TEF-T Real-scale TArget Loop, IMMORTAL" was fabricated as a mock-up test loop of the target for the purpose of the integration testing of individually developed devices. This report describes an overview of IMMORTAL and the design of the installed devices.
Saito, Shigeru; Wan, T.*; Okubo, Nariaki; Kita, Satoshi*; Obayashi, Hironari; Sasa, Toshinobu
JAEA-Technology 2021-034, 94 Pages, 2022/03
JAEA-Technology-2021-034.pdf:5.91MB
Lead-bismuth eutectic alloy (LBE) is a major candidate for a spallation target material and core coolant of an accelerator driven system (ADS) which has been developed in the Japan Atomic Energy Agency (JAEA) to transmute high-level radioactive wastes. A proton irradiation facility to build a material irradiation database for future ADS development is under considering in the J-PARC. To realize both the ADS and the above-mentioned facility, there are many issues on operational safety of LBE to be solved. Especially, corrosion data for the major materials such as T91 (Modified 9Cr-1Mo steel) and SS316L at the temperature range between 400 and 550 
C under the conditions of flowing LBE with a controlled oxygen are not sufficient to design the ADS and the facility. JAEA developed a new large-scale corrosion test loop named "OLLOCHI (Oxygen-controlled LBE LOop for Corrosion tests in HIgh-temperature)" aiming to perform the compatibility tests between the LBE and the steels, as well as to develop the LBE operation technology. OLLOCHI has a function to automatically control the oxygen concentration in LBE. The maximum temperature at the regions of high-temperature and low-temperature of the OLLOCHI are 550 C and 450 C respectively to cover the ADS designed condition. As a result of 2,000 hours operation, it was demonstrated that the OLLOCHI showed the designed performance. In this report, outline of the OLLOCHI, details of the components, results of characteristic tests, and the future experimental plan are described.
Katano, Ryota; Oizumi, Akito; Fukushima, Masahiro; Pyeon, C. H.*
KURNS Progress Report 2020, P. 102, 2021/07
For the design study of ADS, integral experimental data of LBE is necessary to validate cross sections of lead (Pb) and bismuth (Bi). In this study, we conducted Pb and Bi void reactivity measurements using aluminum (Al) void space in Kyoto University Critical Assembly (KUCA). We found that the calculations overestimate the void reactivities of Pb and Bi by about 20 pcm.
Saito, Shigeru; Wan, T.*; Okubo, Nariaki; Obayashi, Hironari; Watanabe, Nao; Ohdaira, Naoya*; Kinoshita, Hidetaka; Yamaki, Kenichi*; Kita, Satoshi*; Yoshimoto, Hidemitsu*; et al.
JPS Conference Proceedings (Internet), 33, p.011041_1 - 011041_6, 2021/03
An Accelerator Driven System (ADS) for waste transmutation investigated in JAEA employs lead-bismuth eutectic (LBE) as a neutron production target material and coolant. The neutrons are to be produced via the spallation with 1.5 GeV proton beam injection. As materials irradiation data are important for ADS development, JAEA plans to construct an irradiation facility with LBE neutron production target in J-PARC. There are many technical issues on LBE for practical use. In JAEA, various R&Ds are being carried out. Concerning corrosion study, conditioning operation and functional tests of OLLOCHI started. Oxygen concentration control technology has also developing. In the large scale LBE loop experiment, the operation for steady state and transient experiments was performed by using IMMORTAL. In the area of instrument, development of ultrasonic flow meter and freeze seal valve are progressing as a key technology for the LBE loop system. Investigation of behavior of impurities in LBE, which is important for design of the irradiation facility, started. In this paper, the status of the LBE studies and experimental plan will be presented.
Ohdaira, Naoya*; Saito, Shigeru
Heliyon (Internet), 6(2), p.e03429_1 - e03429_8, 2020/02
Times Cited Count：4 Percentile：47.54(Multidisciplinary Sciences)Lead-bismuth eutectic (LBE) is a candidate liquid metal coolant for a fast reactor, especially accelerator driven system (ADS). Freeze sealed valve is a candidate design to be possible to add passive safety to the reactor. On the other hand, since LBE is known that it causes expansion after its solidification, quantitative evaluation of the stress to the pipe produced by the LBE expansion should be considered. Many researchers produced related data for the expansion, however, evaluations of the strain by LBE expansion was barely reported. Therefore, the strain measurement using a stainless steel cup and the stress evaluation was performed together with visual observation using an optical microscopy. The results indicated keeping above room temperature (RT) was a significantly effective way to reduce the strain to the pipe.
Saito, Shigeru; Okubo, Nariaki; Obayashi, Hironari; Wan, T.; Sugawara, Takanori; Sasa, Toshinobu; Maekawa, Fujio
JPS Conference Proceedings (Internet), 28, p.071003_1 - 071003_6, 2020/02
Japan Atomic Energy Agency (JAEA) proposes transmutation of minor actinides (MA) by accelerator-driven systems (ADS). The ADS designed by JAEA is a system composed by LBE (Lead-Bismuth Eutectic) spallation target and a subcritical core. In the ADS, a beam window (BW) is exposed in complex field of heavy irradiation by proton/neutron and corrosion by flowing LBE. To develop ADS structural materials, it is of critical importance to investigate materials used in such environment. Thus, JAEA plans to construct a proton irradiation facility at the J-PARC to prepare an irradiation database for candidate ADS structural materials and to investigate irradiation effects in flowing LBE environment. In this paper, giving a whole scope of the JAEA ADS development, some results of experimental measurements and the specific program for planed R&D will be presented.
Saito, Shigeru; Obayashi, Hironari; Wan, T.; Okubo, Nariaki; Sugawara, Takanori; Endo, Shinya; Sasa, Toshinobu
Proceedings of 13th International Topical Meeting on Nuclear Applications of Accelerators (AccApp '17) (Internet), p.448 - 457, 2018/05
JAEA proposes transmutation of minor actinides by accelerator-driven systems (ADS). To obtain the data for ADS design, JAEA plans to construct the ADS Target Test Facility (TEF-T) within the framework of the J-PARC project. In TEF-T, a 250 kW proton-beam-driven LBE (Lead-Bismuth Eutectic) spallation target will be installed to prepare an irradiation database for candidate ADS structural materials. Design activities of the LBE target and target trolley have been progressed. Conceptual design of hot-cells for LBE target loop maintenance and PIE (Post Irradiation Examination) of irradiated samples have been finished. Two LBE loops were manufactured. One is a loop for TEF-T target mock-up and the other is that for collection of material corrosion characteristics in flowing LBE. Oxygen potential control systems for LBE flow have been also developed. Remote handling tests for the target exchange are underway. In this paper, current activities and studies to realize TEF-T will be presented.
Wan, T.; Obayashi, Hironari; Sasa, Toshinobu
Proceedings of 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-17) (USB Flash Drive), 13 Pages, 2017/09
Saito, Shigeru; Okubo, Nariaki; Obayashi, Hironari; Sasa, Toshinobu
NEA/CSNI/R(2017)2 (Internet), p.195 - 200, 2017/06
An ADS (Accelerator Driven System) for waste transmutation investigated in JAEA employs LBE (Lead-Bismuth Eutectic) as spallation target material and core coolant. To realize future ADS and an ADS target experimental facility (TEF-T) planned for construction in J-PARC, there are many technical issues on LBE. In particular, corrosion data of relevant materials like T91 (Mod. 9Cr-1Mo) and SS316L steels at 400-550C under oxygen concentration controlled and flowing condition are indispensable. JAEA has designed and built new LBE corrosion test loop named OLLOCHI (Oxygen-controlled LBE LOop Corrosion tests in HIgh-temperature), to obtain the corrosion data at the higher temperature. The piping of high temperature sections was made by T91 and 2.25Cr-1Mo steel. The maximum temperature of these parts is 550C. At low temperature sections, piping and components were made by SS316L and the maximum temperature is limited to 450C. The status for the OLLOCHI as of March 2016 is that the some modification and the conditioning operation without LBE have already finished. The oxygen sensors and the oxygen control system will be installed soon. After that, the conditioning operation with LBE and oxygen control test will be started. And more, additional flow meters will be installed in each test section until next March. In parallel with these tests, thermal hydraulic analysis of the two test sections will be performed to identify the flow pattern in the specimen holders.
Wan, T.; Obayashi, Hironari; Sasa, Toshinobu
Kashika Joho Gakkai-Shi (USB Flash Drive), 36(Suppl.2), 8 Pages, 2016/10
Wan, T.; Obayashi, Hironari; Sasa, Toshinobu
Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 12 Pages, 2016/10
Kikuchi, Kenji; Takeda, Yasushi*; Obayashi, Hiroo*; Tezuka, Masao*; Sato, Hiroshi
Journal of Nuclear Materials, 356(1-3), p.273 - 279, 2006/09
Times Cited Count：9 Percentile：54.42(Materials Science, Multidisciplinary)Measurements of LBE flow velocity profile were realized in the spallation target model by the ultrasonic Doppler velocity profile technique. Hitherto, it has not yet been done well because both of poor wetting property of LBE with stainless steels and poor performance of supersonic probes at high temperatures. Measurement was made for a return flow in the target model, which has coaxially arranged annular and tube channels. The electromagnetic pump generates LBE flow and the flow rate was measured by the electromagnetic flow meter. Measurement results show that re-circulation occurred near the surface of beam window, which might affect a heat transfer of target container.
Komuro, Yuichi; *; *
JAERI-M 93-246, 19 Pages, 1994/01
no abstracts in English
and 
(
) countingUsuda, Shigekazu; Abe, Hitoshi
Journal of Nuclear Science and Technology, 31(1), p.73 - 79, 1994/01
Times Cited Count：15 Percentile：77.32(Nuclear Science & Technology)no abstracts in English
and () countingUsuda, Shigekazu
Journal of Nuclear Science and Technology, 29(9), p.927 - 929, 1992/09
no abstracts in English
*;
JAERI-M 86-063, 92 Pages, 1986/03
no abstracts in English
;
JAERI-M 9114, 185 Pages, 1980/10
no abstracts in English
; ; *;
JAERI-M 8836, 50 Pages, 1980/04
no abstracts in English
; ; *; Shin, Kazuo*; *; Nakazawa, Masaharu*; *; *; *; ; et al.
JAERI-M 8686, 170 Pages, 1980/02
no abstracts in English
