Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

New precise measurements of muonium hyperfine structure at J-PARC MUSE

Strasser, P.*; Abe, Mitsushi*; Aoki, Masaharu*; Choi, S.*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; et al.

EPJ Web of Conferences, 198, p.00003_1 - 00003_8, 2019/01

https://doi.org/10.1051/epjconf/201919800003

2016 Professional Engineer (PE) test preparation course; Nuclear and radiation technical disciplines

Takahashi, Naoki; Suzuki, Soju; Saito, Hiroto; Ueno, Takashi; Abe, Sadayoshi; Yamanaka, Atsushi; Tanigawa, Masafumi; Nakamura, Daishi; Sasaki, Shunichi; Mine, Tadaharu

Nihon Genshiryoku Gakkai Homu Peji (Internet), 20 Pages, 2017/05

no abstracts in English

The Transfer of radiocesium from the bark to the stemflow of chestnut trees () contaminated by radionuclides from the Fukushima Dai-ichi Nuclear Power Plant accident

Sasaki, Yoshito; Abe, Hironobu; Mitachi, Katsuaki; Watanabe, Takayoshi; Ishii, Yasuo; Niizato, Tadafumi

Journal of Environmental Radioactivity, 161, p.58 - 65, 2016/09

AA2015-0311.pdf:1.93MB

https://doi.org/10.1016/j.jenvrad.2015.12.001

We report the behavior of radiocesium on the tree bark and its transfer into the stemflow of chestnut in a forest in Fukushima. The radiocesium concentration is greatest in 2-cm stem, less in 5-mm stem, and least in the leaves. In the 2-cm stem, the radiocesium concentration of the bark was approximately 10 times that of wood. The average Cs-137 concentration of the dissolved fraction of stem flow was about 10 Bq/L; the pH was nearly constant at 5.8. A strong positive correlation was observed between the radiocesium concentration and the electrical conductivity of the dissolved fraction of stemflow; this result suggests that radiocesium and electrolytes have the same elution mechanism from the tree. Some of the particles in the particulate fraction of the stem flow was strongly adsorbed radiocesium.

Deposition of radioactive caesium in the Fukushima mountain forests by the Fukushima Nuclear Power Plant accident

Ishii, Yasuo; Abe, Hironobu; Niizato, Tadafumi

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 3 Pages, 2015/05

As part of the project entitled "Long-Term Assessment of Transport of Radioactive Contaminant in the Environment of Fukushima" (F-TRACE project), JAEA has researched since November 2012 to predict the transport behavior of radioactive caesium, which now Cs-134 and Cs-137 are the main radiological contribution, from contaminated mountain forests to estuary and coast through dam, pond, river etc. based on their investigated data survey data in the Fukushima prefecture. In this study, we report characterization and radio assay of the surface run-off substances obtained (or collected) at the forest observation plots in the Ogi district of Kawauchi-mura and the Yamakiya district of Kawamata-machi, and at the soil-saving dam in the Ogaki district of Namie-machi, Fukishima prefecture, Japan.

Horonobe Underground Research Laboratory Project; Research and development plan (H22-H26)

Iwatsuki, Teruki; Sato, Haruo; Nohara, Tsuyoshi; Tanai, Kenji; Sugita, Yutaka; Amano, Kenji; Yabuuchi, Satoshi; Oyama, Takuya; Amano, Yuki; Yokota, Hideharu; et al.

JAEA-Research 2011-009, 73 Pages, 2011/06

JAEA-Research-2011-009.pdf:4.41MB

The research and development plan in Horonobe Underground Research Laboratory are summarized according to the 2nd Midterm Plan till 2014 fiscal year of JAEA. In this midterm, galleries and the infrastructures for the research and development up to the depth of 350 m are constructed by Private Financial Initiative (PFI). Additionally Phase 3: Operation phase at the galleries begins in parallel to Phase 2: Construction phase. In these phases various research and development including collaboration with other institutes are conducted at the galleries. Generallic applicable techniques on the subject of the investigation of geological environment, facility construction in deep underground and the reliability of geological deposal are developed during the phase. The feasibility and reliance of various technologies concerning geological disposal is demonstrated by widely opening the outcome to the public in the society.

Measurement of reaction rate distribution in partial mockups for the ITER TBM with DT neutrons

Sato, Satoshi; Takakura, Kosuke; Ochiai, Kentaro; Kondo, Keitaro; Tatebe, Yosuke; Onishi, Seiki; Wada, Masayuki*; Kutsukake, Chuzo; Tanaka, Shigeru; Abe, Yuichi; et al.

Fusion Science and Technology, 56(1), p.227 - 231, 2009/07

https://doi.org/10.13182/FST09-A8907

Previously DT neutronics experiments were performed by using partial blanket mockups for Japanese ITER test blanket module at JAEA FNS, and tritium production rates (TPR) inside blanket mockups were measured in details. The calculation with the nuclear data library FENDL-2.1 and Monte Carlo code MCNP4C agreed well with most of the measured TPRs within uncertainty of 10%. On the other hand, overestimations were found for the TPR in the experiment with a reflector and the TPR around the boundary between the rear part of the breeder layer and the beryllium layer by more than 10%. In order to confirm this concern, we measured reaction rate distribution in the partial blanket mockups with DT neutrons with two solid breeder blanket partial mockups, (Be/LiTiO/Be, SS316/LiTiO/SS316). Experiments were performed with and without a neutron source reflector. In order to measure reaction rate distributions, the activation foil method was applied using Nb and Au foils in this study. Experimental analyses were performed by MCNP4C with FENDL-2.1. Calculation results to experimental ones (C/Es) on the Au reaction rate with a reflector were larger than those without one. Detailed results are presented in this conference.

Establishment of advanced integration technology for site characterization of deep geological repository; Development of information synthesis and interpretation system; Annual report 2007 (Contract research)

Osawa, Hideaki; Ota, Kunio; Hama, Katsuhiro; Sawada, Atsushi; Takeuchi, Shinji; Amano, Kenji; Saegusa, Hiromitsu; Matsuoka, Toshiyuki; Miyamoto, Tetsuo; Toyoda, Gakuji; et al.

JAEA-Research 2008-085, 742 Pages, 2008/11

JAEA-Research-2008-085-1.pdf:26.22MB
JAEA-Research-2008-085-2.pdf:16.64MB
JAEA-Research-2008-085-3.pdf:28.27MB

This report shows the results the project for the establishment of comprehensive site characterization technology, entrusted from Natural Resources and Energy Agency, Ministry of Economy, Trade and Industry Natural Resources and Energy Agency in 2007.

Neutronics experimental study on tritium production in solid breeder blanket mockup with neutron reflector

Sato, Satoshi; Verzilov, Y.*; Ochiai, Kentaro; Wada, Masayuki*; Kutsukake, Chuzo; Tanaka, Shigeru; Abe, Yuichi; Seki, Masakazu; Oginuma, Yoshikazu*; Kawabe, Masaru*; et al.

Journal of Nuclear Science and Technology, 44(4), p.657 - 663, 2007/04

https://doi.org/10.3327/jnst.44.657

Neutronics experiments have been performed for the solid breeder blanket using a DT neutron source at the FNS facility in JAEA. We have applied the blanket mockup composed of two enriched LiTiO and three beryllium layers, and measured the detailed spatial distribution of the tritium production rate (TPR) using enriched LiCO pellets. TPRs in the pellets have been measured by a liquid scintillation counter. Experiments have been done under a condition with a neutron reflector surrounding the DT neutron source. Numerical simulations have been performed using the MCNP-4C with the FENDL-2.0 and JENDL-3.3. The ranges of ratios of calculation results to experimental ones (C/Es) are 0.97-1.17 concerning with local TPR, and 1.04-1.09 for the integrated tritium production. It is found that the total integrated tritium production, which corresponds to tritium breeding ratio, can be predicted within uncertainty of 10% using the Monte Carlo calculation code and latest nuclear data libraries.

Present status of JAEA-Tokai tandem accelerator

Matsuda, Makoto; Takeuchi, Suehiro; Tsukihashi, Yoshihiro; Hanashima, Susumu; Abe, Shinichi; Osa, Akihiko; Ishizaki, Nobuhiro; Tayama, Hidekazu; Nakanoya, Takamitsu; Kabumoto, Hiroshi; et al.

Dai-19-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.9 - 12, 2007/01

no abstracts in English