Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kawamura, Seiko; Oku, Takayuki; Watanabe, Masao; Takahashi, Ryuta; Munakata, Koji*; Takata, Shinichi; Sakaguchi, Yoshifumi*; Ishikado, Motoyuki*; Ouchi, Keiichi*; Hattori, Takanori; et al.
Journal of Neutron Research, 19(1-2), p.15 - 22, 2017/11
Sample environment (SE) team at the Materials and Life Science Experimental Facility (MLF) in J-PARC has worked on development and operation of SE equipment and devices. All the members belong to one sub-team at least, such as Cryogenic and magnet, High temperature, High pressure, Soft matter and special environment including Pulse magnet, Hydrogen environment, Light irradiation and 
He spin filter. Cryostats, a magnet, furnaces, a VX-6-type Paris-Edinburgh press and a prototype of a Spin-Exchange Optical Pumping (SEOP) based He spin filter for polarized neutron beam experiments are in operation. Furthermore, a prototype of compact power supply for a pulsed magnet system is currently developed. In the J-PARC Research Building, several pieces of equipment for softmatter research such as a rheometer and a gas and vapor adsorption measurement instrument have been prepared.
Sakai, Ryutaro; Munakata, Masahiro; Kimura, Hideo; Ooka, Masao*; Seguchi, Mariko*
JAEA-Research 2011-029, 24 Pages, 2011/11
JAEA-Research-2011-029.pdf:3.67MB
In the safety assessment for a geological disposal of radioactive waste, it is important to establish validation methods for regional groundwater flow system to estimate radionuclide migration to human environment through groundwater flow. It is necessary to validate the groundwater flow property and flow boundary, as multi-groundwater systems including the different groundwater origins are possible to exist at deep underground. This results show that mixing analysis based on hydrochemical data and spatial plotting with hydrochemical data and thermal data are applicable to validate groundwater flow pattern and groundwater flow boundary in case of Horonobe area. It also demonstrates that mixing analysis based on hydrochemical data and spatial plotting with hydrological and hydrochemical data are applicable to validate the groundwater flow property and groundwater flow boundary in case of Nagaoka area.
Sakai, Ryutaro; Munakata, Masahiro; Kimura, Hideo; Ooka, Masao*; Kameya, Hiroshi*; Hosoda, Koichi*
Dai-21-Kai Zenkoku Chishitsu Chosagyo Kyokai Rengokai "Gijutsu Foramu" Koenshu (CD-ROM), 2 Pages, 2010/11
no abstracts in English
Matsui, Yoshinori; Takahashi, Hiroyuki; Yamamoto, Masaya; Nakata, Masahito; Yoshitake, Tsunemitsu; Abe, Kazuyuki; Yoshikawa, Katsunori; Iwamatsu, Shigemi; Ishikawa, Kazuyoshi; Kikuchi, Taiji; et al.
JAEA-Technology 2009-072, 144 Pages, 2010/03
JAEA-Technology-2009-072.pdf:45.01MB
"R&D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant" was carried out from FY2006 in a fund of a trust enterprise of the Ministry of Education, Culture, Sports, Science and Technology. The coupled irradiations or single irradiation by JOYO fast reactor and JRR-3 thermal reactor were performed for about two years. The irradiation specimens are very important materials to establish of "Evaluation of Irradiation Damage Indicator" in this research. For the acquisition of the examination specimens irradiated by the JOYO and JRR-3, we summarized about the overall plan, the work process and the results for the study to utilize these reactors and some facilities of hot laboratory (WASTEF, JMTR-HL, MMF and FMF) of the Oarai Research-and-Development Center and the Nuclear Science Research Institute in the Japan Atomic Energy Agency.
Sakai, Ryutaro; Munakata, Masahiro; Ooka, Masao*; Kameya, Hiroshi*
JAEA-Research 2009-038, 38 Pages, 2009/11
JAEA-Research-2009-038.pdf:8.87MB
In the safety assessment for a geological disposal of radioactive waste, it is important to develop a methodology and uncertainties of long-term estimation of regional groundwater flow system. The authors discussed the uncertainties of hydraulic conductivity as a significant hydrological parameter for regional groundwater flow analysis model. This study demonstrated that confining pressure change cased by uplift and subsidence and change of hydraulic gradients under the long-term geological and hydrological environmental change could possibly produce variations more than one order of magnitude in hydraulic conductivity of rock mass. It also clarified that the effect of water quality change on hydraulic conductivity is not negligible and that the replacement of fresh water and saline water cased by sea level change could predict to reduce hydraulic conductivities in rock mass 0.6 times from its present data in case of Horonobe site.
Nagashima, Nobuo*; Hayakawa, Masao*; Tsukada, Takashi; Kaji, Yoshiyuki; Miwa, Yukio*; Ando, Masami*; Nakata, Kiyotomo*
Atsuryoku Gijutsu, 47(4), p.236 - 244, 2009/07
In this study, micro-hardness tests and AFM observations were performed on SUS316L low-carbon austenitic stainless steel pre-strained by cold rolling to investigate its deformation behavior. The following results were obtained. Despite the fact that the same plastic strain was applied, post-tensile test AFM showed narrower slip-band spacing in a reduction in area of 30% cold-rolled specimen than the unrolled specimen. Concentrated slip bands were observed near grain boundaries. Micro-hardness exceeding 300 was found to occur frequently in after tensile test specimens with a reduction in area of 30% or more, particularly at grain boundaries. It is suggested that the nonuniformity of deformation at grain boundaries plays an important role of IGSCC crack propagation mechanism of low-carbon austenitic stainless steel.
Kurosaki, Yukio*; Yamachi, Hiroshi*; Katsunuma, Yoshio*; Nakata, Masao*; Kuwahara, Hideki*; Yamada, Fumitaka*; Matsushita, Kiyoshi*; Sato, Toshinori*
JAEA-Research 2008-048, 274 Pages, 2008/03
JAEA-Research-2008-048.pdf:10.93MB
A junction space between a super deep shaft and horizontal drifts forms a 3-dimensional geo-structure, which would take a complicated mechanical behavior during a junction excavation. However, a quantitative design method for a deep junction has not yet established. In order to examine a collapse mechanism of super deep shaft junction, we have conducted literature surveys and interview studies concerned with a collapses. Considering the results of investigations with reviews of intellectuals, the collapse mechanism depends on both a construction procedure of shaft junction and a geological condition. On the other hand, where a deep junction intersects faults and/or fractures with a large angle, a collapse called taka-nuke may occur and a numerical studies that can simulate a practical rock mass behavior around a shaft junction should be carry out. We demonstrate finite difference method is most adequate for these simulations with intellectual review.
Ando, Masami*; Nakata, Kiyotomo*; Ito, Mikiro*; Tanaka, Norihiko*; Koshiishi, Masato*; Obata, Ryoji*; Miwa, Yukio; Kaji, Yoshiyuki; Hayakawa, Masao*
Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems (CD-ROM), 16 Pages, 2007/00
Long term SCC growth tests for nuclear grade stainless steel (SUS316(NG)) were conducted in a simulated BWR environment using specimens taken from mock-up PLR piping weld joints to obtain the crack growth rate (CGR) of the hardened heat affected zone due to weld shrinkage around weld, in order to develop the CGR curve which will be used for flaw evaluation. The piping joints were made of forged and extracted materials with several welding techniques. The obtained CGRs were higher than that of solution heat treated material. The CGRs for hardened SUS316(NG) have a correlation with hardness regardless of materials and welding techniques. The CGRs increased with hardness in the range from 210 to 250 Hv. The CGR acceleration mechanism in hardened HAZ of low carbon stainless steel was estimated based on the strain distribution and the AFM image around a SCC crack tip. It was suggested that the interaction of the plastic strain gradient at a crack tip and local strain along GBs.
Nagashima, Nobuo*; Hayakawa, Masao*; Tsukada, Takashi; Kaji, Yoshiyuki; Miwa, Yukio; Ando, Masami*; Nakata, Kiyotomo*
Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems (CD-ROM), 15 Pages, 2007/00
Stress corrosion cracking (SCC) was found in shroud and PLR piping made of low-carbon austenitic stainless steels in Japanese BWR plants. The intergranular type (IG) SCC propagated in hardened heat affected zones (HAZ) around welds. Strength behavior and local plastic deformation for a low-carbon austenitic stainless steel 316L, cold-rolled at the reductions in area of 10, 30% at room temperature to simulate the hardened HAZ, were measured by a micro-hardness test machine and observed by atomic force microscopy (AFM), respectively. The tensile deformation at yield point (0.2% plastic strain) had given to the work-hardened 316L to simulate the plastic zone at the crack tip. It is suggested that one of the IGSCC propagation mechanisms for 316L was related with the intergranular strength behavior and local plastic deformation around grain boundaries.
Katsunuma, Yoshio*; Nakata, Masao*; Nagano, Yuji*; Higuchi, Masanori*
JNC TJ7410 2005-004, 213 Pages, 2002/03
JNC-TJ7410-2005-004.PDF:10.22MB
no abstracts in English
Katsunuma, Yoshio*; Nakata, Masao*; Higuchi, Masanori*; Kataigi, Isao*
JNC TJ7410 2005-015, 261 Pages, 2001/03
JNC-TJ7410-2005-015.PDF:10.91MB
no abstracts in English
Uruga, Tomoya*; Tanida, Hajime*; Yoneda, Yasuhiro; Takeshita, Kunikazu*; Emura, Shuichi*; Takahashi, Masao*; Harada, Makoto*; Nishihata, Yasuo; Kubozono, Yoshihiro*; Tanaka, Tsunehiro*; et al.
Journal of Synchrotron Radiation, 6(Part3), p.143 - 145, 1999/05
An x-ray absorption fine-structure (XAFS) spectroscopy beamline, BL01B1, was installed at a bending magnet source at SPring-8 and has been open to users since October 1997. It was designed for XAFS experiments covering a wide energy range. Position tables and automatical control programs were established to adjust the x-ray optics and achieve the designed performance of the beamline under each experimental condition. This has enabled conventional XAFS measurements to be made with a good data quality from 4.5 to 110 keV.
Kita, Haruyuki*; Nakata, Masao*; *
PNC TJ7176 98-003, 68 Pages, 1998/03
no abstracts in English
Yamada, Fumitaka*; Kita, Haruyuki*; Nakata, Masao*
PNC TJ7176 98-002, 135 Pages, 1998/03
None
Sato, Toshinori; *; Nakata, Masao*; *; *; Ishijima, Yoji*
Mitsui Kensetsu Gijutsu Hokoku, (22), ,
None
Kaji, Yoshiyuki; Miwa, Yukio; Tsukada, Takashi; Nagashima, Nobuo*; Hayakawa, Masao*; Ando, Masami*; Nakata, Kiyotomo*; Koshiishi, Masato*
no journal, ,
In recent years, incidents of the stress corrosion cracking (SCC) were frequently reported that occurred in the weld part of core shroud and primary loop recirculation (PLR) piping of low carbon stainless steels, and the cause investigation and measure become the present important issue. In this study, to investigate the effect of plastic deformation behavior at the crack, analyses of plastic deformation behavior at the SCC crack tip were performed by electron back-scattering diffraction pattern (EBSP) method. SCC crack propagated along the grain boundary in the 45 degree direction of a fatigue crack, especially random grain boundary. The plastic deformation showed 10 to 20% in the one grain region of the crack. The plastic deformation behavior was different in both of a SCC crack and large plastic deformation was observed on one side of grain. From these results, it was considered that SCC crack propagation behavior was controlled by plastic deformation of very near crack tip.
Matsui, Yoshinori; Nabeya, Hideaki; Kusunoki, Tsuyoshi; Takahashi, Hiroyuki; Aizawa, Masao; Nakata, Masahito; Numata, Masami; Usami, Koji; Endo, Shinya; Ito, Kazuhiro; et al.
no journal, ,
We are proceeding with the study of "R&D Project on Irradiation Damage Management Technology for Structural Materials of Long-life Nuclear Plant". For the study, it is important that the irradiated specimens are gotten by the coupling of JRR-3 and JOYO. This reports the total irradiation plan in the study, and the executed work for the coupling irradiation (JRR-3 and JOYO) including the Hot facilities work of Tokai and Oarai in the 2006 fiscal year.
Sakai, Ryutaro; Munakata, Masahiro; Kimura, Hideo; Ooka, Masao*; Kameya, Hiroshi*
no journal, ,
In the safety assessment for a geological disposal of radioactive waste, it is important to develop a methodology and uncertainties of long-term estimation of regional groundwater flow system. The authors discussed the uncertainties of hydraulic conductivity as a significant hydrological parameter for regional groundwater flow analysis model. This study demonstrated that confining pressure change cased by uplift and subsidence and change of hydraulic gradients under the long-term geological and hydrological environmental change could possibly produce variations more than one order of magnitude in hydraulic conductivity of rock mass. It also clarified that the effect of water quality change on hydraulic conductivity is not negligible and that the replacement of fresh water and saline water cased by sea level change could predict to reduce hydraulic conductivities in rock mass 0.6 times from its present data in case of Horonobe site.
Sakai, Ryutaro; Munakata, Masahiro; Seguchi, Mariko*; Ooka, Masao*; Ichikawa, Yasuo*; Nakamura, Masaru*; Ishibashi, Junichiro*
no journal, ,
In the safety assessment for a geological disposal of radioactive waste, it is important to establish validation methods for deep groundwater flow system to estimate radionuclide migration to human environment through groundwater flow. This study discussed the method which estimates groundwater mixing condition and groundwater flow process using principal component analysis to groundwater chemistry and isotopic compositions in case of Horonobe area. The results demonstrated that there are three component of deep groundwater which has long residence time and surface water derived from meteoric water in this area.
Aso, Tomokazu; Yamauchi, Yasuhiro; Sakaguchi, Yoshifumi*; Munakata, Koji*; Ishikado, Motoyuki*; Kawamura, Seiko; Yokoo, Tetsuya*; Watanabe, Masao; Takata, Shinichi; Hattori, Takanori; et al.
no journal, ,
In FY2013, the SE team was officially organized in Technology Development Section in MLF with succeeding the previous ad hoc SE team. We are working on operation of so-called beam-line (BL)-common SE equipment and development of the SE devices as well as the previous SE team. We have already prepared a vertical-field superconducting magnet, a dilution refrigerator insert, a furnace with Nb heater and 2K cryostat as the BL-common SE equipment. In this fiscal year, a bottom-loading type 
He cryostat will be introduced. Moreover, we have just started developing high pressure system by collaborating with High Pressure Group in MLF, to comply with users' requests. We have also discussed the general purpose of apparatus for pulse magnet and for hydrogen environment. We plan to prepare more working area for the SE equipment, whose number gradually increases, and sample preparation and characterization rooms for users in the new building, which is under construction.
