Ono, Masato; Hanawa, Yoshio; Sonobe, Hiroshi; Nishimura, Arashi; Sugaya, Naoto; Iigaki, Kazuhiko
JAEA-Technology 2020-010, 14 Pages, 2020/09
In response to new standard for regulating research and test reactor which is enforced December 18, 2013, it was carried out assessment of the probability of aircraft crashing for HTTR. According to assessment method provided in the Assessment Criteria of the Probability of Aircraft Crashing on Commercial Power Reactor Facilities, assessment was conducted targeting reactor building, spent fuel storage building and cooling tower. As a result, it was confirmed that the probability was 5.9810, which is lower than the assessment criteria 10.
Ishitsuka, Etsuo; Nakashima, Koki*; Nakagawa, Naoki*; Ho, H. Q.; Ishii, Toshiaki; Hamamoto, Shimpei; Takamatsu, Kuniyoshi; Kenzhina, I.*; Chikhray, Y.*; Matsuura, Hideaki*; et al.
JAEA-Technology 2020-008, 16 Pages, 2020/08
As a summer holiday practical training 2019, the feasibility study for nuclear design of a nuclear battery using HTTR core was carried out, and the U enrichment and burnable poison of the fuel, which enables continuous operation for 30 years with thermal power of 5 MW, were studied by the MVP-BURN. As a result, it is clear that a fuel with U enrichment of 12%, radius of burnable poison and natural boron concentration of 1.5 cm and 2wt% are required. As a next step, the downsizing of core will be studied.
Sector of Fast Reactor and Advanced Reactor Research and Development
JAEA-Evaluation 2020-001, 128 Pages, 2020/08
Japan Atomic Energy Agency consulted with the "Evaluation Committee of Research Activities for High Temperature Gas-cooled Reactor (hereinafter referred to as "HTGR") and Related Hydrogen Production Technology" (hereinafter referred to as "Evaluation Committee"), which consists of specialists in the fields of the evaluation subjects of high temperature gas-cooled reactor and related heat application technology, for interim assessment in the 3rd Mid-and Long-Term Plan about the relevance of the management and research activities of the HTGR and related application technology during the period from April 2017 to March 2020. As a result, three members of the Evaluation Committee concluded a score of "S", and seven members of the Evaluation Committee concluded a score of "A". The interim assessment to research and development activities from April 2017 to March 2020 was concluded a score of "A". In addition, the Evaluation Committee recommended that the judgement to move to the construction phase of the HTTR-heat utilization test plant be made after 2 years, after the HTTR will be restarted and the thermal load fluctuation tests using HTTR will be carried out. This report lists the members of the Evaluation Committee and outlines the assessment item and the review process for procedure of the assessment. The assessment report which was issued by the Evaluation Committee is attached.
Aoki, Takeshi; Chirayath, S. S.*; Sagara, Hiroshi*
Annals of Nuclear Energy, 141, p.107325_1 - 107325_7, 2020/06
The proliferation resistance (PR) of an inert matrix fuel (IMF) in the transuranic nuclear fuel cycle (NFC) of a high temperature gas cooled reactor is evaluated relative to the uranium and plutonium mixed-oxide (MOX) NFC of a light water reactor using PRAETOR code and sixty-eight input attributes. The objective is to determine the impacts of chemical stability of IMF and fuel irradiation on the PR. Specific material properties of the IMF, such as lower plutonium content, carbide ceramics coating, and absence of U, contribute to enhance its relative PR compared to MOX fuel. The overall PR value of the fresh IMF (an unirradiated direct use material with a one-month diversion detection timeliness goal) is nearly equal to that of the spent MOX fuel (an irradiated direct use nuclear material with a three-month diversion detection timeliness goal). Final results suggest a reduced safeguards inspection frequency to manage the IMF.
Sato, Hiroyuki; Ohashi, Hirofumi
Mechanical Engineering Journal (Internet), 7(3), p.19-00332_1 - 19-00332_11, 2020/06
An uncertainty analysis method for control room habitability under toxic gas leakage accidents in cogeneration HTGR is proposed to support risk-informed design of the plant. The method is applied to representative toxic gas leakage accidents in a IS process hydrogen production plant coupled to the HTTR gas turbine test plant. Epistemic and aleatory uncertainties for each variable parameter are identified and are propagated using Latin hypercube sampling. The analyses show that the suggested method can successfully characterize and quantify uncertainties in the toxic gas concentration in control room. The results lead us to the conclusion that toxic gas dispersion behavior analysis should combine two evaluation methods: dense gas dispersion model and computational fluid dynamics simulation.
Takada, Shoji; Ngarayana, I. W.*; Nakatsuru, Yukihiro*; Terada, Atsuhiko; Murakami, Kenta*; Sawa, Kazuhiro*
Mechanical Engineering Journal (Internet), 7(3), p.19-00536_1 - 19-00536_12, 2020/06
In this study reasonable 2D model was established by using FLUENT for start-up of analysis and evaluation of heat transfer flow characteristics in 1/6 scale model of VCS for HTTR. By setting up pressure vessel temperature around 200C about relatively high ratio of heat transfer via natural convection in total heat removal around 20-30%, which is useful for code to experiment benchmark in the aspect to confirm accuracy to predict temperature distribution of components which is heated up by natural convection flow. The numerical results of upper head of pressure vessel by the --SST intermittency transition model, which can adequately reproduce the separation, re-adhesion and transition, reproduced the test results including temperature distribution well in contrast to those by the - model in both cases that helium gas is evacuated or filled in the pressure vessel. It was emerged that any local hot spot did not appear on the top of upper head of pressure vessel where natural convection flow of air is separated in both cases. In addition, the plume of high temperature helium gas generated by the heating of heater was well mixed in the upper head and uniformly heated the inner surface of upper head without generating hot spots.
Ueta, Shohei; Mizuta, Naoki; Sasaki, Koei; Sakaba, Nariaki; Ohashi, Hirofumi; Yan, X. L.
Mechanical Engineering Journal (Internet), 7(3), p.19-00571_1 - 19-00571_12, 2020/06
JAEA has been progressing to design HTGR fuels for not only small-type practical HTGRs but also VHTR proposed in GIF which can be utilized for various purposes with high-temperature heat at 750 to 950 C. To increase economy of these HTGRs, JAEA has been upgrading the design method for the HTGR fuel, which can maintain their integrities at the burnup of three to four times higher than that of the conventional HTTR fuel. Design principles and specifications of various concepts of the high burnup HTGR fuels designed by JAEA are reported. As the latest results on post-irradiation examinations of the high burnup HTGR fuel progressing in a framework of international collaboration with Kazakhstan, irradiation shrinkage rate of the fuel compact as a function of fast neutron fluence was obtained at around 100 GWd/t. Furthermore, the future R&Ds needed for the high burnup HTGR fuel are described based on these experimental results.
Ioka, Ikuo; Iwatsuki, Jin; Kuriki, Yoshiro*; Kawai, Daisuke*; Yokota, Hiroki*; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki
Mechanical Engineering Journal (Internet), 7(3), p.19-00377_1 - 19-00377_11, 2020/06
A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen with high cost performance. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO on the surface. To confirm the production characteristics of a container using the hybrid material, the container which has a welded part, a chamfer, a curved surface was experimentally made. There was no detachment in the plasma spraying and laser treated layer of the container after the laser treatment. It was confirmed that the construction of the container with high corrosion resistance in sulfuric acid was possible in the hybrid technique.
Ono, Masato; Fujiwara, Yusuke; Matsumoto, Tetsuro*; Iigaki, Kazuhiko
Nippon Genshiryoku Gakkai Wabun Rombunshi, 19(2), p.110 - 120, 2020/06
Integrity confirmation for buildings against collisions of projectiles has been conducted to evaluate collisions between a projectile with simple shape and a wall using empirical formulas. It is a matter of fact, there is a possibility that structures with complex shape such as stack may collide with a reactor building. However, there were not so many studies of collisions between structures with complex shape and buildings in the literature. Impact evaluation was carried out using reactor building and stack with real shape and adequate physical property. It was found that ceiling of reactor building was not damaged by the collision, confirming that there was no effect inside of reactor building.
Nagasumi, Satoru; Matsunaka, Kazuaki*; Fujimoto, Nozomu*; Ishii, Toshiaki; Ishitsuka, Etsuo
JAEA-Technology 2020-003, 13 Pages, 2020/05
The influence of the control rod model on the nuclear characteristics of the HTTR has been evaluated, by creating detailed control rod model, in which geometric shape was close to that of the actual control rod structure, in MVP code. According to refinement of the control rod model, the critical control rod position was 11 mm lower than that of the conventional model, and this was close to the measured value of 1775 mm. The reactivity absorbed by the shock absorber located at the tip of the control rod was 0.2%k/k, and this was 14 mm difference at the critical control rod position. Considering the effect of refinement of the control rod and the effect of the shock absorber, the correction amount for the analysis value in SRAC code due to the shape effect of the control rod, is -0.05%k/k in reactivity, and -3 mm in the critical control rod position at low temperature criticality.
Chikhray, Y.*; Askerbekov, S.*; Kenzhin, Y.*; Gordienko, Y.*; Ishitsuka, Etsuo
Fusion Science and Technology, 76(4), p.494 - 502, 2020/05
Sawada, Shinichi*; Kimura, Takehiro*; Nishijima, Haruyuki*; Kodaira, Takahide*; Tanaka, Nobuyuki; Kubo, Shinji; Imabayashi, Shinichiro*; Nomura, Mikihiro*; Yamaki, Tetsuya*
International Journal of Hydrogen Energy, 45(27), p.13814 - 13820, 2020/05
An electrochemical membrane Bunsen reaction using a cation exchange membrane (CEM) is a key to achieving an iodine-sulfur (IS) thermochemical water splitting process for mass-production of hydrogen. In this study, we prepared both the radiation-grafted CEM with a high ion exchange capacity (IEC) and the highly-porous Au-electroplated anode, and then used them for the membrane Bunsen reaction to reduce the cell overvoltage. The high-IEC grafted CEM exhibited low resistivity for proton transport, while the porous Au anode had a large effective surface area for anodic SO oxidation reaction. As a result, the cell overvoltage for the membrane Bunsen reaction was significantly reduced to 0.21 V at 200 mA/cm, which was only one-third of that of the previous test using the commercial CEM and non-porous anode. From the analysis of the current-voltage characteristics, employment of the grafted CEM was found to be more effective for the overvoltage reduction compared to the porous Au anode.
Fukaya, Yuji; Mizuta, Naoki; Goto, Minoru; Ohashi, Hirofumi; Yan, X. L.
Nuclear Engineering and Design, 361, p.110577_1 - 110577_6, 2020/05
Conceptual design study of a commercial High Temperature Gas-cooled Reactor (HTGR) for early introduction has been performed based on the cumulated experience in design, construction, and operation of the High Temperature engineering Test Reactor (HTTR) and design of the commercial Gas Turbine High Temperature Reactor 300 (GTHTR300). The power output is 165 MWt and the inlet and outlet coolant temperatures are 325C and 750C, respectively, to provide steam for industrial utilization. However, given a requirement for the reactor pressure vessel to be smaller even that of the 30 MWt HTTR, several challenging technical problems have to be dealt with to arrive in a high performance core design that provides extended fuel burnup, prolonged refueling period, improved fuel refueling scheme, improved fuel element and so on from the HTTR.
Kamiji, Yu; Noguchi, Hiroki; Takegami, Hiroaki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji
Nuclear Engineering and Design, 361, p.110573_1 - 110573_6, 2020/05
JAEA has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. The glass-lined steel is one of the candidate materials which has both corrosion resistance and structural strength. This paper reveals technical matters to improve reliability of the glass-lined steel equipment. It found that the improved glass-lined steel showed soundness in the process environment from the results of stress analyses for the glass layer by FEM, tests for heat cycle, bending load and corrosion.
Fukaya, Yuji; Goto, Minoru; Ohashi, Hirofumi
Annals of Nuclear Energy, 138, p.107182_1 - 107182_9, 2020/04
The investigation on self-shielding effect of double heterogeneity for plutonium burner High Temperature Gas-cooled Reactor (HTGR) design has been performed. Plutonium burner HTGR designed in the previous study by using the advantage of double heterogeneity to control excess reactivity. In the present study, the mechanism of the self-shielding effect is elucidated by the analysis of burn-up calculation and reactivity decomposition based on exact perturbation theory. As a result, it is revealed that the characteristics of burn-up reactivity are determined by resonance cross section peak at 1 eV of Pu due to the surface term of background cross section, this is, the characteristics of neutron leakage from fuel lump and collision to a moderator. Moreover, significant spectrum shift is caused during the burn-up period, and it enhances reactivity worth of Pu and Pu in EOL.
Ho, H. Q.; Honda, Yuki*; Hamamoto, Shimpei; Ishii, Toshiaki; Takada, Shoji; Fujimoto, Nozomu*; Ishitsuka, Etsuo
Journal of Nuclear Engineering and Radiation Science, 6(2), p.021902_1 - 021902_6, 2020/04
Sato, Hiroyuki; Aoki, Takeshi; Ohashi, Hirofumi; Yan, X. L.
Nuclear Engineering and Design, 360, p.110493_1 - 110493_8, 2020/04
JAEA has been conducting research and development with a central focus on the utilization of HTTR, the first HTGR in Japan, towards the realization of industrial use of nuclear heat. On the basis of licensing experience through the HTTR construction, JAEA initiated an activity to establish an international safety standard for licensing of commercial HTGR cogeneration systems fully taking into account safety features of HTGRs. We have developed a roadmap towards licensing of commercial HTGR cogeneration systems. A test plan using the HTTR to support the establishment of safety standards and safety analysis methods are also presented. In addition, we confirmed that a vessel cooling system, a passive air-cooled decay heat removal system, satisfies the safety requirement.
Takegami, Hiroaki; Noguchi, Hiroki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kamiji, Yu; Kasahara, Seiji; Imai, Yoshiyuki; Terada, Atsuhiko; Kubo, Shinji
Nuclear Engineering and Design, 360, p.110498_1 - 110498_6, 2020/04
Japan Atomic Energy Agency (JAEA) has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. JAEA fabricated main chemical reactors made of industrial structural materials and confirmed their integrity in practical corrosive environments in the IS process. Based on the results of these confirmation tests, JAEA have constructed a 100 NL/h-H-scale test facility made of industrial structural materials. In this report, we succeeded in extending the hydrogen production time from 8 hours to 31 hours by developing a stable hydrogen iodide solution transfer technology in a continuous hydrogen production test. In addition, using the fracture test data of the ceramic specimen, an equation for estimating the strength of the ceramic component was developed.
Department of HTTR
JAEA-Review 2019-049, 97 Pages, 2020/03
The High Temperature Engineering Test Reactor (HTTR), a graphite-moderated and helium gas-cooled reactor being able to get 950C temperature of the outlet coolant with 30MW of thermal power, constructed at the Oarai Research and Development Institute of the Japan Atomic Energy Agency is the first High- Temperature Gas-cooled Reactor (HTGR) in Japan. The purpose of the HTTR is to establish and upgrade basic technologies for HTGRs. The HTTR has accumulated a lot of experience of HTGRs' operation and maintenance up to the present time throughout rated power operations, safety demonstration tests, long-term high temperature operations and demonstration tests relevant to HTGRs' R&Ds. In the fiscal year 2018, we made effort to pass the inspection of application document for the HTTR licensing to prove conformity with the new regulatory requirements for research reactors that took effect since December 2013 in order to restart operations of the HTTR that stopped since the 2011 off the Pacific coast of Tohoku Earthquake. This report summarizes the activities carried out in the 2018 fiscal year, which were the situation of the new regulatory requirements screening of the HTTR, the operation and maintenance of the HTTR, R&Ds relevant to commercial-scale HTGRs, the international cooperation on HTGRs and so on.
Fukaya, Yuji; Goto, Minoru; Nakagawa, Shigeaki; Nakajima, Kunihiro*; Takahashi, Kazuki*; Sakon, Atsushi*; Sano, Tadafumi*; Hashimoto, Kengo*
Proceedings of International Conference on the Physics of Reactors; Transition To A Scalable Nuclear Future (PHYSOR 2020) (USB Flash Drive), 8 Pages, 2020/03
The Japan Atomic Energy Agency (JAEA) started the Research and Development (R&D) to improve nuclear prediction techniques for High Temperature Gas-cooled Reactors (HTGRs). The objectives are to introduce a generalized bias factor method to avoid full mock-up experiment for the first commercial HTGR and to introduce reactor noise analysis to High Temperature Engineering Test Reactor (HTTR) experiment to observe subcriticality. To achieve the objectives, the reactor core of graphite-moderation system named B7/4"G2/8"p8EUNU+3/8"p38EU(1) was newly composed in the B-rack of Kyoto University Critical Assembly (KUCA). The core is composed of the fuel assembly, driver fuel assembly, graphite reflector, and polyethylene reflector. The fuel assembly is composed of enriched uranium plate, natural uranium plate and graphite plates to realize the average fuel enrichment of HTTR and it's spectrum. However, driver fuel assembly is necessary to achieve the criticality with the small-sized core. The core plays a role of the reference core of the bias factor method, and the reactor noise was measured to develop the noise analysis scheme. In this study, the overview of the criticality experiments is reported. The reactor configuration with graphite moderation system is rare case in the KUCA experiments, and this experiment is expected to contribute not only for an HTGR development but also for other types of a reactor in the graphite moderation system such as a molten salt reactor development.