放射線加工レベルCo線高線量率校正用電離箱システム
Ionization chamber system for calibration of Co -ray high dose rate at radiation processing level
小嶋 拓治; 橘 宏行; 羽田 徳之; 金子 広久; 春山 保幸; 田中 隆一*
Kojima, Takuji; Tachibana, Hiroyuki; Haneda, Noriyuki; Kaneko, Hirohisa; Haruyama, Yasuyuki; Tanaka, Ryuichi*
現在、医療用具の滅菌等放射線加工処理では、広い照射場が得られるようにCo 線板状線源を用い10010,000 Gy/h程度の線量率を利用している。こうしたパノラミックな(コリメートされていない)照射場の特性や線量率範囲は、点線源を用いたコリメートされた比較的低い線量率の照射場をもつ現在の線量標準機関と異なっていることから、この分野における線量トレーサビリティをもたせることは容易でない。そこで、日本原子力研究所(原研)では、国家標準である経済産業省産業技術総合研究所(産総研)における線量率範囲も含み広い範囲520,000 Gy/hをカバーするCo 線照射場を二つの大線量用線源を用いて構築し、この照射場において平行平板型電離箱システムに基づく大線量校正技術を開発した。原研での線量校正が産総研とトレーサビリティをもつことを技術的に明らかにするため、線量率範囲10100 Gy/hオーダーの産総研で与えられた電離箱の校正結果、すなわち電流から照射線量率への換算係数は、照射場の特性のちがいに関わる補正なく、大線量率520,000Gy/hにおいても有効であることを示した。また、不確かさ2.2%(95%信頼度相当)で線量0.5 Gyを校正できることを明らかにした。
Plaque type Co -ray sources having wide radiation field with high absorbed dose rates ranging of about 10010,000Gy/h is widely used in radiation processing e.g. radiation sterilization of health care products. Calibration of such radiation processing doses or dose rates is not easy to be performed at the present standard dosimetry laboratories, since characteristics of most of their radiation field can provide collimated gamma-rays from a point source and/or lower dose rates, which are quite different from those of panoramic (uncollimated) radiation fields used in radiation processing. The high-dose calibration technique using a parallel-plate ionization chamber system has developed in the JAERI dose calibration facility. The facility equips two Co -ray plaque sources covering wide dose-rate range of 520,000 Gy/h which have overlapping dose-rate region with that at the National Institute of Advanced Industrial Science and Technology(AIST), the national standard Dosimetry laboratory in Japan. Consistency of dose calibration results at JAERI and those at AIST was verified without additional correction regarding to difference in characteristics of radiation fields involving current/exposure -rate conversion coefficients given in the dose rate level of 10100 Gy/h at the AIST and high-dose rates of 520,000 Gy/h at JAERI. It demonstrates our dose traceability to the AIST from the technical point of view. The dose calibration at JAERI covers the high-dose range of 0.5 to Gy with uncertainty of 2.2% at 95% confidence level.