Main results of static and dynamic corrosion tests in oxygen-saturated liquid lead-bismuth
酸素飽和した液体鉛ビスマス中における静的及び動的腐食試験の主要な結果
倉田 有司; 菊地 賢司; 斎藤 滋
; 二川 正敏
; 佐々 敏信

Kurata, Yuji; Kikuchi, Kenji; Saito, Shigeru; Futakawa, Masatoshi; Sasa, Toshinobu
MEGAPIE(Megawatt Pilot Experiment)の技術開発会議での報告がFZKのレポートとしてまとめられたものである。静的腐食試験では、ガス拡散法によって作られたAl表面処理層が液体鉛ビスマスに対する耐食性を示すのに対し、液体浸漬法よって作られたAl表面処理層は激しい腐食を受けることがわかった。また、550
Cでの腐食でオーステナイト系ステンレス鋼はNi及びCrが溶解し、フェライト化,鉛ビスマスの浸透が起こることが示された。ループ腐食試験では450
Cの高温部での主要元素の溶解と400
Cの低温部でのFe-Crの析出,酸化鉛の沈着が起こり、電磁ポンプの鉛ビスマス流路の狭隘化が生じた。鉛ビスマスループにおいて、フィルターの設置,電磁ポンプ流路の拡大,腐食試験体の内面研磨は、ループの運転に好影響をもたらした。
A report at MEGAPIE(Megawatt Pilot Experiment) Technical R & D Meeting is collected into an FZK report. According to the static corrosion tests, Al surface-treated layer produced by the gas diffusion method exhabited corrosion resistance to liquid Pb-Bi, while Al surface-treated layer produced by the melt dipping method suffered a severe corrosion attack. Furtheremore, it was found that a thick ferrite layer was formed in the surface of austenitic stainless steel at 550
C. Dissolution at high temperature parts, precipitation of Fe-Cr alloy and deposition of PbO at low temperature parts occured in the first loop corrosion test. These caused plugging of the narrow passage in electro-magnetic pumu(EMP) system. Adoption of filters and a wide passage in an EMP system, and the use of an inner-polished tube specimen brought about a good effect.