検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

Effect of oxygen-to-metal ratio on densification behavior in the sintering process of PuO$$_{2}$$ pellet

PuO$$_{2}$$ペレットの焼結特性に与えるO/M比の影響

内田 哲平; 砂押 剛雄*; 加藤 正人  

Uchida, Teppei; Sunaoshi, Takeo*; Kato, Masato

MOX fuel pellets are produced from UO$$_{2}$$ and PuO$$_{2}$$ powders by mechanical blending method. It is important to control pellet density in the pellet production. To investigate the change of the sintering rate depending on O/M ratio is important for MOX pellet production. The purpose of this work is to investigate the densification behavior of PuO$$_{2}$$ which is one of the starting materials as a function of O/M ratio. Thermal dilatometer was employed to measure pellet densification. The measurements were carried out in atmosphere of air and Ar/H$$_{2}$$ gas mixture added moisture. Powder of PuO$$_{2}$$ was pressed and measured at 1923 K in various conditions. The changes of grain size and densification rate were observed with O/M ratio. The PuO$$_{2}$$ pellet sintered in air was very low density of 84%TD. The highest density pellet of 96%TD was obtained by sintering at O/M ratio of about 1.99.

Access

:

- Accesses

InCites™

:

パーセンタイル:85.38

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.