検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

Development of central solenoid for JT-60SA

JT-60SAの中心ソレノイドの開発

木津 要; 村上 陽之; 土屋 勝彦; 吉田 清; 野元 一宏*; 今井 良夫*; 湊 恒明*; 尾花 哲浩*; 濱口 真司*; 高畑 一也*

Kizu, Kaname; Murakami, Haruyuki; Tsuchiya, Katsuhiko; Yoshida, Kiyoshi; Nomoto, Kazuhiro*; Imai, Yoshio*; Minato, Tsuneaki*; Obana, Tetsuhiro*; Hamaguchi, Shinji*; Takahata, Kazuya*

JT-60SAの中心ソレノイド(CS)の最大経験磁場、電流値、電圧は8.9T, 20kA, 10kVである。そのため、高磁場・高電流密度のNb$$_{3}$$Sn導体を開発した。CSの外形と高さは2m, 1.6mである。幾つかの構成部品を新規に開発し、試験を行った。供給磁束を最大化するためには、巻線の直径をできるだけ大きくする必要がある。そのために、ジョイントの空間を最小化できるバットタイプのジョイントを開発した。DGEBAエポキシを用いた絶縁は、100kGyの$$gamma$$線照射においても十分な強度を有していることが示された。4$$times$$4に導体を積み重ねたサンプルに運転時の2倍の応力を運転回数与えた後に絶縁試験を行ったところ、21kVより大きな絶縁耐力があった。これらの結果より、CS実機製作が開始できる。

The maximum magnetic field, current and voltage of CS for JT-60SA are 8.9 T, 20 kA and 10 kV, respectively. Nb$$_{3}$$Sn conductor with high field and high current density was developed. The outer diameter and height of CS are 2 and 1.6 m, respectively. Several components were newly developed and tested. To increase the supplying flux, winding diameter should be maximized as possible. The butt type joint was developed that can minimize the joint space. DGEBA epoxy used for main binder of insulation showed sufficient tensile strength even though the $$gamma$$ ray irradiation of 100 kGy. Insulation characteristics of 4$$times$$4 stack sample applying double of operational stress with operational cycle showed the larger withstand voltage than 21 kV. According to these results, the fabrication of CS can be started.

Access

:

- Accesses

InCites™

:

パーセンタイル:71.1

分野:Engineering, Electrical & Electronic

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.