Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
被引用回数：0In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.
FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloyLi, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*
Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02
被引用回数：0 パーセンタイル：0.02(Nanoscience & Nanotechnology)The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in Fe
Mn
Al
Ni
Ti
alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.
CoSi山内 宏樹; Sari, D. P.*; 安井 幸夫*; 坂倉 輝俊*; 木村 宏之*; 中尾 朗子*; 大原 高志; 本田 孝志*; 樹神 克明; 井川 直樹; et al.
Physical Review Research (Internet), 6(1), p.013144_1 - 013144_9, 2024/02
-Mn-type family alloys Mn
have three-dimensional antiferromagnetic (AFM) corner-shared triangular network. The antiferromagnet MnRhSi shows magnetic short-range order (SRO) over a wide temperature range of approximately 500 K above the N
el temperature 
= 190 K. MnCoSi has the smallest lattice parameter and the lowest in the family compounds. The quantum critical point (QCP) from AFM to the quantum paramagnetic state is expected near a cubic lattice parameter of 6.15 
of MnCoSi is only 140 K, quantum critical behavior is observed in MnCoSi as the enhancement of the electronic specific heat coefficient 
. We study how the magnetic SRO appears in MnCoSi by using neutron scattering, 
SR, and physical property measurements. The experimental results show that the neutron scattering intensity of the magnetic SRO does not change much regardless of the suppressed magnetic moment in the long-range magnetic ordered state compared to those of MnRhSi. The initial asymmetry drop ratio of SR above becomes small, and the magnetic SRO temperature 
is suppressed to 240 K. The results suggest that the MnCoSi is close to the QCP in the Mn system.
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 11 Pages, 2024/00
被引用回数：0 パーセンタイル：0.02(Materials Science, Multidisciplinary)High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.
Zhang, A.*; Deng, K.*; Sheng, J.*; Liu, P.*; Kumar, S.*; 島田 賢也*; Jiang, Z.*; Liu, Z.*; Shen, D.*; Li, J.*; et al.
Chinese Physics Letters, 40(12), p.126101_1 - 126101_8, 2023/12
被引用回数：2 パーセンタイル：57.37(Physics, Multidisciplinary)In a Dirac semimetal, the massless Dirac fermion has zero chirality, leading to surface states connected adiabatically to a topologically trivial surface state as well as vanishing anomalous Hall effect. Recently, itis predicted that in the nonrelativistic limit of certain collinear antiferromagnets, there exists a type of chiral "Dirac-like" fermion, whose dispersion manifests four-fold degenerate crossing points formed by spin-degenerate linear bands, with topologically protected Fermi arcs. Here, by combining with neutron diffraction and first-principles calculations, we suggest a multidomain collinear antiferromagnetic configuration, rendering the existence of the Fermi-arc surface states induced by chiral Dirac-like fermions.
Hu, Q.*; Wang, Q. M.*; Zhang, T.*; Zhao, C.*; Iltaf, K. H.*; Liu, S. Q.*; 深津 勇太
Energy Reports (Internet), 9, p.3661 - 3682, 2023/12
被引用回数：4 パーセンタイル：73.72(Energy & Fuels)This study evaluates petrophysical properties of representative geological rocks in the context of injectivity, storage space, and caprock integrity for effective utilization and long-term storage of carbon dioxide. A total of 10 geological rocks were selected as representative storage media for consideration as saline aquifers & depleted oil and gas reservoirs, basalts, and cap rocks, as well as utilization in organic-rich shale and coal seams. An integrated suite of laboratory tests, including liquid immersion porosimetry, gas expansion porosimetry, grain size distribution, mercury intrusion porosimetry, and gas diffusion, were performed on these various rock samples. The results exhibit a disparity of petrophysical properties among two broad groups of rocks: rocks selected for possible storage of CO
have porosities of 
10-25%, permeabilities of 10
-10
m
, m-sized pore-throat size distribution, and mostly good pore connectivity; in contrast, the potential caprocks have porosities of 0.5-5%, permeabilities of 10
-10
m, pore throat sizes of 
50 nm, and probably poorly connected pore networks. An understanding of the measured facets of pore structure and contribution of fractures is also critical in the context of different testing principles and data interpretation of petrophysical analyses, as well as observational scales in the laboratory and field, and therefore reliable confidence of CO storage and utilization performance. Our work further illustrates the controlling influence of grain size distribution and geological processes on pore size distribution and pore connectivity for a wide range of rock types and lithologies, and particularly presents the extent and behavior of CO gas diffusion with a custom-designed apparatus for a holistic understanding of various petrophysical attributes of widely different geological rocks.
TaSPark, P.*; Cho, W.*; Kim, C.*; An, Y.*; Kang, Y.-G.*; Avdeev, M.*; Sibille, R.*; 飯田 一樹*; 梶本 亮一; Lee, K. H.*; et al.
Nature Communications (Internet), 14, p.8346_1 - 8346_9, 2023/12
被引用回数：0 パーセンタイル：0(Multidisciplinary Sciences)The triangular lattice antiferromagnet (TLAF) has been the standard paradigm of frustrated magnetism for several decades. The most common magnetic ordering in insulating TLAFs is the 120
structure. However, a new triple-
chiral ordering can emerge in metallic TLAFs, representing the short wavelength limit of magnetic skyrmion crystals. We report the metallic TLAF CoTaS as the first example of tetrahedral triple- magnetic ordering with the associated topological Hall effect (non-zero 
). We also present a theoretical framework that describes the emergence of this magnetic ground state, which is further supported by the electronic structure measured by angle-resolved photoemission spectroscopy. Additionally, our measurements of the inelastic neutron scattering cross section are consistent with the calculated dynamical structure factor of the tetrahedral triple- state.
Bao, S.*; Gu, Z.-L.*; Shangguan, Y.*; Huang, Z.*; Liao, J.*; Zhao, X.*; Zhang, B.*; Dong, Z.-Y.*; Wang, W.*; 梶本 亮一; et al.
Nature Communications (Internet), 14, p.6093_1 - 6093_9, 2023/09
被引用回数：2 パーセンタイル：57.37(Multidisciplinary Sciences)Magnon polarons are novel elementary excitations possessing hybrid magnonic and phononic signatures, and are responsible for many exotic spintronic and magnonic phenomena. Despite long-term sustained experimental efforts in chasing for magnon polarons, direct spectroscopic evidence of their existence is hardly observed. Here, we report the direct observation of magnon polarons using neutron spectroscopy on a multiferroic FeMo
O
possessing strong magnon-phonon coupling. Specifically, below the magnetic ordering temperature, a gap opens at the nominal intersection of the original magnon and phonon bands, leading to two separated magnon-polaron bands. Each of the bands undergoes mixing, interconverting and reversing between its magnonic and phononic components. We attribute the formation of magnon polarons to the strong magnon-phonon coupling induced by Dzyaloshinskii-Moriya interaction. Intriguingly, we find that the band-inverted magnon polarons are topologically nontrivial. These results uncover exotic elementary excitations arising from the magnon-phonon coupling, and offer a new route to topological states by considering hybridizations between different types of fundamental excitations.
Esser, S. P.*; Rahlff, J.*; Zhao, W.*; Predl, M.*; Plewka, J.*; Sures, K.*; Wimmer, F.*; Lee, J.*; Adam, P. S.*; McGonigle, J.*; et al.
Nature Microbiology (Internet), 8(9), p.1619 - 1633, 2023/09
被引用回数：2 パーセンタイル：75.4(Microbiology)CRISPR-Cas systems defend prokaryotic cells from viruses, plasmids, and other mobile genetic elements. Capitalizing on multi-omics approaches, we show here that the CRISPR-Cas systems of uncultivated archaea also play an integral role in mitigating potentially detrimental interactions with episymbionts. A comprehensive analysis of CRISPR-Cas-based infection histories revealed that uncultivated deep-subsurface archaeal primary-producers defend themselves from archaeal episymbionts of the DPANN superphylum of archaea, some of which are known to fuse their membranes with their host. We show that host cells counter these attacks by deploying one of two CRISPR-Cas systems (type I-B and type III-A) to target and disrupt essential genes in the episymbiont. However, genome-scale modeling of metabolic interactions between two deep subsurface host-symbiont systems revealed that host cells also benefit from the symbionts via metabolic complementation. We speculate that populations of these uncultivated archaeal episymbionts are currently transitioning from a parasitic lifestyle to one of mutualism, as must have occurred in countless mutualistic systems known today. By expanding our analysis to thousands of archaeal genomes, we conclude that CRISPR-Cas mediated resistance to archaeal episymbiosis evolved independently in various archaeal lineages and may be a wide-spread evolutionary phenomenon.
Zhang, T.*; Yao, Y.*; 守田 幸路*; Liu, X.*; Liu, W.*; 今泉 悠也; 神山 健司
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The in-pile EAGLE ID1 test was conducted by Japan Atomic Energy Agency to demonstrate the effectiveness of the fuel assembly with an internal duct structure during a core disruptive accident in a sodium-cooled fast reactor. In this study, a new computational fluid dynamics code based on the fully Lagrangian particle method was developed for the purpose of clarifying the failure mechanism of the inner duct wall of FAIDUS. The three-dimensional simulation of the ID1 test was performed to analyze a series of thermal hydraulic behaviors leading up to duct wall failure for a computational domain that included six fuel pins. The simulations reasonably reproduced the heat transfer characteristics observed in the test, showing that the local contact of liquid steel with high thermal conductivity with the duct wall greatly enhances the heat transfer from the nuclear heating fuel to the duct wall. The results support the validity of the conclusions of our analytical study regarding the molten pool-to-duct wall heat transfer mechanism that caused the thermal failure of the duct wall.
Zhang, T.*; 田島 裕之*; 関野 裕太*; 内野 瞬; Liang, H.*
Communications Physics (Internet), 6, p.86_1 - 86_7, 2023/04
被引用回数：1 パーセンタイル：57.37(Physics, Multidisciplinary)空間的に一様なラビ結合を介した、2成分フェルミ超流動状態とノーマル状態間のレーザー誘起アンドレフ反射を理論的に提案する。超流動状態とノーマル状態間のトンネル電流をラビ結合の4次まで解析することにより、アンドレーフ電流がゼロ温度で非従来型の非オーミック輸送を示すことを発見した。これは、従来の超伝導体-常伝導体接合とは対照的で、化学ポテンシャルバイアスの値に関わらず、ゼロ離調においてアンドレーエフ電流が唯一の寄与となることが明らかになった。この結果は、アンドレーエフ反射を量子情報鏡として利用することで、ブラックホール情報のパラドックスを解明する道筋を示すものであると考えられる。
Lam, T.-N.*; Chin, H.-H.*; Zhang, X.*; Feng, R.*; Wang, H.*; Chiang, C.-Y.*; Lee, S. Y.*; 川崎 卓郎; Harjo, S.; Liaw, P. K.*; et al.
Acta Materialia, 245, p.118585_1 - 118585_9, 2023/02
被引用回数：8 パーセンタイル：78.27(Materials Science, Multidisciplinary)The present study investigates the crystallographic-texture effects on the improved fatigue resistance in the CoCrFeMnNi high-entropy alloys (HEAs) with the full-size geometry of the ASTM Standards E647-99. We exploited X-ray nano-diffraction mapping to characterize the crystal-deformation levels ahead of the crack tip after stress unloading under both constant- and tensile overloaded-fatigue conditions. The crack-tip blunting-induced much higher deformation level was concentrated surrounding the crack-tip which delays the fatigue-crack growth immediately after a tensile overload. The predominant deformation texture orientation in the Paris regime was investigated, using electron backscatter diffraction and orientation distribution function analyses. The twinning formation-driven shear deformation gave rise to the development of the Goss-type texture within the plastic deformation regime under a tensile-overloaded-fatigue condition, which was attributed to enhance the crack deflection and thus the tensile induced crack-growth-retardation period in the CoCrFeMnNi HEA.
Chen, J.*; 山本 慧; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Ma, J.*; Liu, S.*; Gao, P.*; et al.
Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02
被引用回数：6 パーセンタイル：87.72(Physics, Applied)Coherent coupling in magnon based hybrid system has many potential applications in quantum information processing. Magnons can propagate in magnetically ordered materials without any motion of electrons, offering a unique method to build low-power-consumption devices and information channels free of heat dissipation. In this article, we demonstrate the coherent propagation of hybridized modes between spin waves and Love surface acoustic waves in a multiferroic BiFeO and ferromagnetic La
Sr
MnO based heterostructure. The magneto-elastic coupling enables a giant enhancement of strength of the hybridized mode by a factor of 26 compared to that of the pure spin waves. A short wavelength down to 250 nm is demonstrated for the hybridized mode, which is desirable for nanoscale acousto-magnonic applications. Our combined experimental and theoretical analyses represent an important step towards the coherent control in hybrid magnonics, which may inspire the study of magnon-phonon hybrid systems for coherent information processing and manipulation.
Wu, P.*; 村井 直樹; Li, T.*; 梶本 亮一; 中村 充孝; 古府 麻衣子; 中島 健次; Xia, K.*; Peng, K.*; Zhang, Y.*; et al.
New Journal of Physics (Internet), 25(1), p.013032_1 - 013032_11, 2023/01
被引用回数：0 パーセンタイル：0(Physics, Multidisciplinary)The understanding of the lattice dynamics is essential for engineering the thermal transport properties in quantum materials. Based on the canonical point of view, acoustic phonons are believed to be the principal thermal carriers in heat flow. Here, in this work, optical phonons are elucidated to play a pivotal role in determining the lattice thermal conductivity in thermoelectric material SnS by using the state-of-the-art inelastic neutron scattering technique combined with first-principles calculations. Additionally, in contrast to acoustic phonons, optical phonons are observed to exhibit pronounced softening and broadening with temperature. Our observations not only shed light on the significance of the optical phonons in thermal transport but also provide a vital clue to suppress the propagation of optical phonons to optimize the thermoelectric performance of SnS.
Zhang, T.*; 守田 幸路*; Liu, X.*; Liu, W.*; 神山 健司
Annals of Nuclear Energy, 179, p.109389_1 - 109389_10, 2022/12
被引用回数：1 パーセンタイル：29.26(Nuclear Science & Technology)The ID1 test was the final target test of the EAGLE experimental framework program. It was used to verify that during a core disruptive accident, the molten fuel could be discharged via wall failure of an inner duct in FAIDUS, a design concept for the sodium-cooled fast reactor. The ID1 results revealed that the wall failure behavior owed to the large heat flow from the surrounding fuel/steel mixture. The present study numerically investigated the heat transfer mechanisms in the test using the finite volume particle method in the three-dimensional domain. The thermal hydraulic behaviors during wall failure were reproduced reasonably. The present three-dimensional simulation mitigated inherent defects of our previous two-dimensional calculation and clarified that the solid fuel and liquid steel close to the outer surface of the duct can expose the duct to high thermal loads, resulting in the wall failure.
Liu, X. J.*; 徐 平光; 城 鮎美*; Zhang, S. Y.*; 菖蒲 敬久; 行武 栄太郎*; 秋田 貢一*; Zolotoyabko, E.*; Liss, K.-D.*
Journal of Materials Science, 57(46), p.21446 - 21459, 2022/12
被引用回数：3 パーセンタイル：38.91(Materials Science, Multidisciplinary)In situ time/temperature-resolved synchrotron high-energy X-ray diffraction is applied to study heat-mediated structural changes and phase transformations in rolled sheets of AZ91 and AZ31 magnesium alloys. Azimuthal diffraction intensities along the Debye-Scherrer rings (AT-plots) are used to obtain information on grain recovery and recrystallization temperatures as well as temperature-assisted grain rotations. The azimuthally integrated diffraction intensities, plotted as functions of the scattering vector (QT-plots), provide vital data on the temperature-dependent lattice parameters of the Mg/Al matrix and intermetallic precipitates, as well as on the evolution of the precipitates' volume fraction. It was found that in AZ31, the main precipitates are of the AlMn type, which is rather stable in the investigated temperature range (up to 773 K). In contrast, in AZ91, the major intermetallic precipitates, Al
Mg
, undergo complete dissolution above 600 K. It is caused by the enhanced diffusion of Al into the Mg/Al matrix, which according to the Al-Mg phase diagram, can adopt more Al at elevated temperatures. This diffusion is revealed by the proportional diminishing of the matrix lattice parameter (chemical strain), allowing us to quantify the Al content in the matrix. Fast temperature-dependent manipulation with intermetallic content in the Mg/Al alloy can, in principle, be used for controlling its mechanical properties.
Zhang, J.*; Kuang, L.*; Mou, Z.*; 近藤 俊明*; 小嵐 淳; 安藤 麻里子; Li, Y.*; Tang, X.*; Wang, Y.-P.*; Pe
uelas, J.*; et al.
Plant and Soil, 481(1-2), p.349 - 365, 2022/12
被引用回数：4 パーセンタイル：52.15(Agronomy)Soil warming effects on soil organic carbon (SOC) decomposition and stabilization are highly variable, and the underlying mechanisms are poorly understood. In this study, concentration, stability (dissolved, particle and mineral-associated SOC), and source (plant-derived and microbial-derived) of SOC, soil microbial community composition, and enzyme activities were studied in a 10-year soil warming field experiment in an East Asian monsoon forest. The results showed that 10-year soil warming significantly enhanced SOC in the top 0-10 cm soil. The increased SOC induced by warming was mainly derived from plants with lignin markers, accompanied by a decrease in microbial-derived SOC. This highlights an urgent need for a better understanding of how the contrasting effects of plant- and microbial-derived C mediate the response of the SOC pool to warming across different biomes.
高塚 大地*; 守田 幸路*; Liu, W.*; Zhang, T.*; 中村 武志*; 神山 健司
Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 10 Pages, 2022/10
A 3D particle-based simulation code was developed to analyze jet impingement behavior, and the physical models for thermal-hydraulic interactions between molten jets and solid plates used in the code was validated by simulating existing jet impingement experiments. In addition, particle-based simulations were conducted to understand the impingement characteristics of molten MOX fuel jets on SS plates, and the erosion rate of the SS plate was evaluated. The results showed that fuel crusts formed on the plate potentially provide thermal protection and confirmed the effect of the plate erosion rate on the jet diameter under conditions where crust formation is dominant.
Wang, Q.*; Hu, Q.*; Zhao, C.*; Yang, X.*; Zhang, T.*; Ilavsky, J.*; Kuzmenko, I.*; Ma, B.*; 舘 幸男
International Journal of Coal Geology, 261, p.104093_1 - 104093_15, 2022/09
被引用回数：5 パーセンタイル：66.48(Energy & Fuels)To understanding the spatial heterogeneity of mineral and pore structure variations in fine-grained shale, microscale X-ray fluorescence (micro-XRF) mapping, (ultra-) small-angle X-ray scattering [(U)SAXS] and wide-angle X-ray scattering were applied for two samples from a piece of Eagle Ford Shale in South Texas. Thin section petrography and field emission-scanning electron microscopy, X-ray diffraction (XRD), total organic carbon, and pyrolysis were also utilized to investigate the potential spatial heterogeneity of pore types, mineral and organic matter compositions for both samples. Overall, the siliceous-carbonate mineral contents in these carbonate-rich Eagle Ford Shale vary between laminations at mm scales. By analyzing six selected sub-samples on each of two samples with X-ray scattering and XRD techniques, nm-sized pores are mainly interparticle ones in the higher calcite regions, where the porosity is also relatively lower, while the lower calcite regions consist of both interparticle and intraparticle pore types with higher porosity. Finally, the micro-XRF and (U)SAXS are combined to generate porosity distribution maps to provide more insights about its heterogeneity related to the laminations and fractures at our observational scales.
Khalil, A. M. E.*; Han, L.*; Maamoun, I.; Tabish, T. A.*; Chen, Y.*; Eljamal, O.*; Zhang, S.*; Butler, D.*; Memon, F. A.*
Advanced Sustainable Systems (Internet), 6(8), p.2200016_1 - 2200016_16, 2022/08
被引用回数：2 パーセンタイル：26.88(Green & Sustainable Science & Technology)Graphene-based materials have emerged as alternative adsorbents, but their success in removing pharmaceutical contaminants has been limited due to degradation caused by restacking and limited control over their sizes and porosities. Driven by this issue, in the current study, to counteract the restacking behavior, graphene sheets are supported on a thread/rod-like matrix structure in a boron nitride foam material, and a novel porous composite foam-supported graphene is synthesized. The as-prepared novel composite offers extraordinary features, such as high absorption kinetics, large available surface area, high porosity, ecofriendliness and cost-effective synthesis, and excellent affinity to emerging pharmaceutical contaminants. When batch-testing graphene-based foam material and porous graphene nanosheets to remove gemfibrozil (GEM) from wastewater samples, rapid adsorption kinetics (less than 5 min) are exhibited by the graphene-based foam. Column filter studies are conducted for both materials to test their performance in removing GEM from distilled water, synthetic graywater, and actual wastewater. Overall, the foam composite-based filter marginally outperforms the sand-supported graphene filter and significantly outperforms the unsupported graphene filter. A numerical MATLAB model is developed to simulate the reactive solute transport of GEM influent through the foam filter. Also, a formal sensitivity analysis is conducted to identify the key parameters influencing the model results.
