Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Gu, G. H.*; Jeong, S. G.*; Heo, Y.-U.*; Harjo, S.; Gong, W.; Cho, J.*; Kim, H. S.*; 他4名*
Journal of Materials Science & Technology, 223, p.308 - 324, 2025/07
被引用回数:0 パーセンタイル:0.00(Materials Science, Multidisciplinary)Face-centered cubic (FCC) equi-atomic multi-principal element alloys (MPEAs) exhibit excellent mechanical properties from cryogenic to room temperatures. At room temperature, deformation is dominated by dislocation slip, while at cryogenic temperatures (CTs), reduced stacking fault energy enhances strain hardening with twinning. This study uses in-situ neutron diffraction to analyze the temperature-dependent deformation behavior of Al(CoNiV)
, a dual-phase (FCC/BCC) medium-entropy alloy (MEA). At liquid nitrogen temperature (LNT), deformation twinning in the FCC matrix leads to additional strain hardening through the dynamic Hall-Petch effect, giving the appearance of improved strengthening at LNT. In contrast, BCC precipitates show dislocation slip at both 77 K and 298 K, with temperature-dependent lattice friction stress playing a significant role in strengthening. The study enhances understanding of deformation behaviors and provides insights for future alloy design.
浪江 将成; 斉藤 淳一; 岡 涼太郎*; Kim, J.-H.*
Vacuum, 234, p.114038_1 - 114038_9, 2025/04
被引用回数:0 パーセンタイル:0.00(Materials Science, Multidisciplinary)Wettability of titanium (Ti) and surface-modified (Oxidized or Fluorinated) Ti with liquid sodium (Na) were investigated via experiments and theoretical calculations. From the experimental results, a sliding angle of Na droplet on oxidized Ti was smaller than that on untreated Ti, indicating the worsening of wettability by oxidation. In contrast, the sliding angle of Na droplet on fluoridated Ti was larger than that on untreated Ti, indicating an improvement in wettability by fluorination. Additionally, the cluster models for the interface between Na droplets and treated or untreated Ti were constructed for theoretical calculations of electronic states at the interface, covalent and ionic bonds at the interface were evaluated from the calculation results. The sliding angles obtained in the wettability tests and the strength of covalent bonding at the interface showed no correlation, but good correlation was observed between the sliding angles and ionic bonding at the interface. Thus, the wettability of surface-modified Ti with liquid Na can be theoretically understood based on the atomic interactions at the interface.
Chung, J.-H.*; Kwangwoo, S.*; Yokoo, Tetsuya R.; 植田 大地*; 今井 正樹; Kim, H.-S.; Kiem, D. H.; Han, M. J.*; 社本 真一
Scientific Reports (Internet), 15, p.5978_1 - 5978_10, 2025/02
被引用回数:0 パーセンタイル:0.00(Multidisciplinary Sciences)Two dimensional honeycomb ferromagnets host massless Dirac magnons which are a bosonic analogue of Dirac fermions in graphene. The Dirac magnons may become massive and topological when the time-reversal symmetry breaks and an energy gap opens up at the Dirac point, which was experimentally observed in Cr-based van der Waals magnets. Here, we investigate the spin wave excitations in the
magnetic oxide FeTiO
with Fe
electrons (
). Using inelastic neutron scattering, we observe two magnon bands separated by a 1.2-meV gap at the Dirac points indicating that its Dirac magnons are massive. Using the linear spin-wave and density functional theory calculations, we find that the spin-orbit-coupled antisymmetric Dzyaloshinskii-Moriya exchanges can best account for the observed Dirac gap opening. The associated Berry curvature and Chern number (
) indicate that FeTiO
hosts topological spin excitations via time-reversal symmetry breaking of Dirac magnons.
浪江 将成; 斉藤 淳一; 池田 明日香; 岡 涼太郎*; Kim, J.-H.*
Surfaces (Internet), 7(3), p.550 - 559, 2024/09
The iron (Fe) specimens selected as the substrate metal for this study were surface-treated using fluorine gas, and their wettability with liquid sodium (Na) was evaluated using the sliding angle. Additionally, the surface morphology and binding state were analyzed, and the applicability of wettability control with liquid sodium by fluorination was discussed using the analysis results. Fluorination formed a fluoride layer comprising FeF and FeF
bonds on the iron surface. The composition of the fluoride layer varied, depending on the treatment conditions. The surface of the specimen that contains a lot of FeF
bonds had a small sliding angle for the liquid sodium droplet and was harder to wet than the untreated specimen. In contrast, the surface of the specimen that contains a lot of FeF
bonds had a large sliding angle for the liquid sodium droplet and was easier to wet than the untreated specimen. These results indicate that fluorination is an effective surface modification technique that can be applied to control the wettability of iron with liquid sodium.
Park, P.*; Cho, W.*; Kim, C.*; An, Y.*; Avdeev, M.*; 飯田 一樹*; 梶本 亮一; Park, J.-G.*
Physical Review B, 109(6), p.L060403_1 - L060403_7, 2024/02
被引用回数:6 パーセンタイル:86.08(Materials Science, Multidisciplinary)Spontaneous Hall conductivity has recently been reported in the triangular lattice antiferromagnet CoTaS
under a zero magnetic field. This phenomenon originates from the distinctive noncoplanar triple-
magnetic ground state, possessing uniform real-space Berry curvature characterized by scalar spin chirality. We investigated the physical properties of Co
TaS
by judiciously controlling the composition, revealing a drastic change in its bulk properties, even by slight variations in cobalt composition, despite the same crystal structure. For
, Co
TaS
keeps all the characteristics of the ground state consistent with the previous studies - two antiferromagnetic phase transitions at
and
(
), a large spontaneous Hall conductivity [
], and a weak ferromagnetic moment along the
axis. However, samples with
exhibit distinct bulk properties, including the absence of both
and the weak ferromagnetic moment. Our neutron diffraction data reveal that Co
TaS
with
develops coplanar helical magnetic order with
. This is entirely different from what has been seen in
, explaining the observed composition dependence.
Mun, M.-H.*; Shin, I. J.*; Paeng, W.-G.*; 原田 正康*; Kim, Y.*
European Physical Journal A, 59(7), p.149_1 - 149_6, 2023/07
被引用回数:4 パーセンタイル:60.26(Physics, Nuclear)Using an extended parity doublet model with the hidden local symmetry, we study some properties of nuclei in the mean field approximation to see if the parity doublet model could reproduce nuclear properties and also to estimate the value of the chiral invariant nucleon mass preferred by nuclear structure. We first determine our model parameters using the inputs from free space and from nuclear matter properties. Then, we study some basic nuclear properties such as the nuclear binding energy with several different choices of the chiral invariant mass. We observe that our results approach the experimental values as
is increased until
= 700 MeV and start to deviate more from the experiments afterwards with m0 larger than
= 700 MeV. From this observation, we conclude that
= 700 MeV is preferred by nuclear properties. We then calculate some properties of several selected nuclei with
= 700 MeV and compare them with experiments. Finally, we study the neutron-proton mass difference in some nuclei.
安江 歩夢*; 川上 真由*; 小林 謙祐*; Kim, J.*; 宮津 裕次*; 西尾 悠平*; 向井 智久*; 諸岡 聡; 兼松 学*
Quantum Beam Science (Internet), 7(2), p.15_1 - 15_14, 2023/05
Neutron diffraction is a noncontact method that can measure the rebar strain inside concrete. In this method, rebar strain and stress are calculated using the diffraction profile of neutrons irradiated during a specific time period. In general, measurement accuracy improves with the length of the measurement time. However, in previous studies, the measurement time was determined empirically, which makes the accuracy and reliability of the measurement results unclear. In this study, the relationship between the measurement time and the measurement standard deviation was examined for reinforced concrete specimens under different conditions. The aim was to clarify the accuracy of the measurement of rebar stress using the neutron diffraction method. It was found that if the optical setup of the neutron diffractometer and the conditions of the specimen are the same, there is a unique relationship between the diffraction intensity and the rebar stress standard deviation. Furthermore, using this unique relationship, this paper proposes a method for determining the measurement time from the allowable accuracy of the rebar stress, which ensures the accuracy of the neutron diffraction method.
芝田 悟朗; Won, C.*; Kim, J.*; 野中 洋亮*; 池田 啓祐*; Wan, Y.*; 鈴木 雅弘*; 小出 常晴*; 田中 新*; Cheong, S.-W.*; et al.
Photon Factory Activity Report 2022 (インターネット), 2 Pages, 2023/00
Feをインターカレートした遷移金属ダイカルコゲナイド化合物FeTiS
およびFe
TaS
は、巨大な保磁力および垂直磁気異方性を示す強磁性体になることが知られている。我々は以前、Fe
TiS
についてのX線磁気円二色性(XMCD)実験の結果から、Fe
の凍結していない軌道磁気モーメントが結晶場の1次摂動によって直接磁気異方性エネルギーを生むことを明らかにした。今回、Fe
TiS
よりもさらに強い磁気異方性を示す遷移金属ダイカルコゲナイドFe
TaS
について同様にXMCD実験を行い、磁気異方性の強さが何によって左右されているかを探ることを試みた。
細川 隆行*; 安江 歩夢*; Kim, J.*; 栗田 圭輔; 兼松 学*
コンクリート構造物の補修,補強,アップグレード論文報告集(CD-ROM), 22, p.113 - 118, 2022/10
本研究では、乾湿繰り返しを行ったコンクリートの水分状態が鉄筋腐食に及ぼす影響を明らかにすることを目的とし、その前段階として、乾湿繰り返しにおける乾燥程度の違いが相対含水率に及ぼす影響を検討した。加えて、水分移動の影響が大きいひび割れ部に関して解析を行った。実験結果より、試験体中央の鉄筋軸垂直方向10mm範囲において、6時間吸水後40Cの乾燥を42および90時間行った場合の相対含水率は、0
5%程度しか差が生じず、20
Cの乾燥を90および186時間行った場合、10
20%程度の差が生じた。また、ひび割れを有する試験体では、ひび割れ部における相対含水率は健全部と比較して、10
15%程度高くなった。
Kim, G.*; Im, S.*; Jee, H.*; Suh, H.*; Cho, S.*; 兼松 学*; 諸岡 聡; 小山 拓*; 西尾 悠平*; 町田 晃彦*; et al.
Cement and Concrete Research, 159, p.106869_1 - 106869_17, 2022/09
被引用回数:27 パーセンタイル:86.85(Construction & Building Technology)This study explored the effect of M-S-H formation on the local atomic arrangements and mechanical properties of C-S-H. The elastic moduli of the samples were calculated using shifted atomic distances (r) and d-spacings (d) acquired by applying an external load on the pastes during X-ray scattering experiments. The experimental results indicated that the crystal structure of C-S-H remained intact with MgCl addition. At the highest Mg/Si ratio (Ca/Si = 0.6, Mg/Si = 0.2), change in the dominant phase occurred from C-S-H to M-S-H because the low pH environment hindered the formation of C-S-H and facilitated the formation of M-S-H. The elastic modulus decreased with increasing Mg/Si ratio up to 0.1 owing to both C-S-H destabilization and low M-S-H content in the samples. Conversely, the elastic modulus increased in the paste synthesized with the highest Mg/Si ratio because considerable M-S-H had formed, which exhibited a higher elastic modulus than C-S-H.
Tang, J.*; Seo, O.*; Rivera Rocabado, D. S.*; 小板谷 貴典*; 山本 達*; 難波 優輔*; Song, C.*; Kim, J.*; 吉越 章隆; 古山 通久*; et al.
Applied Surface Science, 587, p.152797_1 - 152797_8, 2022/06
被引用回数:11 パーセンタイル:67.59(Chemistry, Physical)水素貯蔵材料として重要な立方体形状Pdナノ粒子の水素吸収と拡散メカニズムをX線光電子分光とDFT計算を用いて調べた。表面領域では粒子の大きさによらず、ほぼ同様の水素吸収挙動を示した。四面体サイトよりも八面体サイトの水素占有率が大きいことがわかった。表面の乱れによってPd-H結合が弱くなるため、小さいサイズのPdナノ粒子に吸収された水素原子は、より活発に粒子内部に拡散することが分かった。これが低水素圧での水素吸着に重要な役割を果たしている。
Zhao, Y.*; Suzuki, T.*; Iimori, T.*; Kim, H.-W.*; Ahn, J. R.*; 堀尾 眞史*; 佐藤 祐輔*; 深谷 有喜; Kanai, T.*; Okazaki, K.*; et al.
Physical Review B, 105(11), p.115304_1 - 115304_8, 2022/03
被引用回数:1 パーセンタイル:7.32(Materials Science, Multidisciplinary)本研究では、時間・角度分解光電子分光を用いて、SiC基板上に作製したグラフェン層におけるキャリアダイナミクスについて調べた。光ポンピング後の準結晶グラフェンのディラックバンドでは、電子ドーピングに層依存性が観測された。また、光誘起キャリア輸送量は基板からの距離に依存することがわかった。フラット基板及びステップ基板上の単層グラフェンの結果から、キャリアの生成源は界面のステップ状態に由来することがわかった。本メカニズムは、密度汎関数計算による電子構造を基にした動的モデルにより記述できる。
深谷 有喜; Zhao, Y.*; Kim, H.-W.*; Ahn, J.-R.*; 吹留 博一*; 松田 巌*
Physical Review B, 104(18), p.L180202_1 - L180202_5, 2021/11
被引用回数:16 パーセンタイル:71.60(Materials Science, Multidisciplinary)2層グラフェンはねじれ角に応じて多彩な物性を発現する。30のねじれ角を持つ2層グラフェンでは、相対論的ディラックフェルミオンを有する二次元準結晶となる。本研究では、陽電子回折を用いて、SiC(0001)基板上に合成したグラフェン準結晶の原子配置を解明した。グラフェン準結晶の層間隔は3.46
であり、通常のAB積層型に比べ0.17
広がることがわかった。この値は、グラフェン間のカップリングの強さを決定するうえで重要なパラメーターとなる。
Im, S.*; Jee, H.*; Suh, H.*; 兼松 学*; 諸岡 聡; 小山 拓*; 西尾 悠平*; 町田 晃彦*; Kim, J.*; Bae, S.*
Journal of the American Ceramic Society, 104(9), p.4803 - 4818, 2021/09
被引用回数:26 パーセンタイル:82.77(Materials Science, Ceramics)This study aims to elucidate the effect of heating on the local atomic arrangements, structure, phase transformation, and mechanical properties of synthesized calcium-silicate-hydrate (C-S-H). The alteration in the atomic arrangement of the synthesized C-S-H (Ca/Si = 0.8) and the formation of crystalline phases that occurred in three distinct transformation stages of dehydration (105-200 C), decomposition (300-600
C), and recrystallization (700-1000
C) were investigated via powder X-ray diffraction,
Si nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. Further, the deformation of the local atomic bonding environment and variations in mechanical properties during the three stages were assessed via pair distribution function analysis based on in-situ total X-ray scattering. The results revealed that the C-S-H paste before heating exhibited a lower elastic modulus in real space than that in the reciprocal space in the initial loading stage because water molecules acted as a lubricant in the interlayer. At the dehydration stage, the strain as a function of external loading exhibited irregular deformation owing to the formation of additional pores induced by the evaporation of free moisture. At the decomposition stage, the structural deformation of the main d-spacing (d
3.0
) was similar to that of the real space before the propagation of microcracks. At the recrystallization stage, the elastic modulus increased to 48 GPa owing to the thermal phase transformation of C-S-H to crystalline
-wollastonite. The results provide direct experimental evidence of the micro- and nanostructural deformation behavior of C-S-H pastes after exposure to high temperature under external loading.
冠城 雅晃; 島添 健次*; 加藤 昌弘*; 黒澤 忠弘*; 鎌田 圭*; Kim, K. J.*; 吉野 将生*; 庄司 育宏*; 吉川 彰*; 高橋 浩之*
Nuclear Instruments and Methods in Physics Research A, 1010, p.165544_1 - 165544_9, 2021/09
被引用回数:0 パーセンタイル:0.00(Instruments & Instrumentation)2011年の東京電力ホールディングス福島第一原子力発電所の事故以来、世界各地で廃止措置措置に入る原子力施設が増加している。これらの原子力施設では、放射性物質の適切な管理が要求されている。そこで、ガンマ線スペクトル測定技術は、放射性物質の重要な情報を得ることができるため、有益なツールである。さらに、放射性物質の空間情報も重要であるため、ガンマ線イメージングについて求められている。しかしながら、これらの施設には、強度放射線場が広がるため、ガンマ線スペクトル測定やガンマ線イメージングが困難になる。そのため、寸法が5mm 5mm
5mmの小さなCeBr
シンチレーター4個で分割した
線スペクトロメーターを開発した。上記の4個のシンチレーターは、強度放射場に特化したマルチアノード光電子増倍管と組合わせた。私たちは、
Csと
Coの放射線場で照射試験を実施した。
Cs照射場の線量率1375mSv/hにおいて、相対エネルギー分解能が、それぞれのチャンネルで、9.2
0.05%, 8.0
0.08%, 8.0
0.03%, 9.0
0.04%であった。
Kim, J.-Y.*; Kim, H.-C.*; Yang, G.-S.*; 岡 眞
Physical Review D, 103(7), p.074025_1 - 074025_21, 2021/04
被引用回数:17 パーセンタイル:72.62(Astronomy & Astrophysics)スピン3/2のチャームバリオンの電磁崩壊過程をパイオン平均場を用いたカイラルクォークソリトン模型によって計算した。およびSU(3)の破れの効果を取り入れ、ヴァレンスクォークとスィークォークが遷移形状因子にどの程度寄与するかを定量的に調べた。
の小さい領域では、スィークォークの効果がより大きくなること、SU(3)の破れはUスピン禁止遷移を除き、非常に小さいことを発見した。格子QCDおよび他の模型計算との比較を行った。
冠城 雅晃; 島添 健次*; 加藤 昌弘*; 黒澤 忠弘*; 鎌田 圭*; Kim, K. J.*; 吉野 将生*; 庄司 育宏*; 吉川 彰*; 高橋 浩之*; et al.
Nuclear Instruments and Methods in Physics Research A, 988, p.164900_1 - 164900_8, 2021/02
被引用回数:14 パーセンタイル:82.89(Instruments & Instrumentation)近年、2011年の東京電力ホールディングス福島第一原子力発電所事故より、世界各地で、廃止措置になる原子力施設が増加している。一方、原子力施設の廃止措置工程においては、放射性廃棄物や使用済み核燃料を適切な管理下で回収しなければならないため。そこで、本研究は、高線量率下でのガンマ線スペクトロメトリを実現するため、5mm5mm
5mmの微小CeBr
スペクトロメーターを構築した。さらに、(1)毎秒ギガサンプリング率のデジタル信号処理、(2)後段3段ダイノード電圧印加機能付光電子増倍管により、1Sv/hを超える線量率でのガンマ線スペクトル測定に成功した。
Cs放射線場で、662keVのエネルギー分解能(半値幅)が、22mSv/hで4.4%であり、それが1407mSv/hでは5.2%である。対して、
Co放射線場では、1333keVのエネルギー分解能(半値幅)が、26mSv/hで3.1%であり、それが2221mSv/hでは4.2%である。これらは、
Cs,
Cs,
Co,
Euのガンマ線を分解できる要求を満たており、同時に1Sv/h以上で上記核種のガンマ線分析が可能なことを示唆するものである。
冠城 雅晃; 島添 健次*; 大鷹 豊*; 上ノ町 水紀*; 鎌田 圭*; Kim, K. J.*; 吉野 将生*; 庄子 育宏*; 吉川 彰*; 高橋 浩之*; et al.
Nuclear Instruments and Methods in Physics Research A, 971, p.164118_1 - 164118_8, 2020/08
被引用回数:8 パーセンタイル:60.88(Instruments & Instrumentation)Our work focused on the passive gamma-ray analysis (PGA) of the nuclear fuel debris based on measuring gamma rays with an energy greater than 1 MeV for the decommissioning of the Fukushima Daiichi Nuclear Power Station (FDNPS). The PGA requires gamma-ray spectrometers to be used under the high dose rates in the FDNPS, then we fabricated a small cubic CeBr spectrometer with dimensions of 5 mm
5 mm
5 mm, coupled to a Hamamatsu R7600U-200 photomultiplier tube (PMT). The performance at dose rates of 4.4 to 750 mSv/h in a
Co field was investigated. The energy resolution (FWHM) at 1333 keV ranged from 3.79% to 4.01%, with a standard deviation of 6.9%, which met the narrow gamma decay spectral lines between
Eu (1274 keV) and
Co (1333 keV). However, the spectra shifted to a higher energy level as the dose rate increase, there was a 51% increase at the dose rates of 4.4 to 750 mSv/h, which was caused by the PMT gain increase.
Bae, J. W.*; Jung, J.*; Kim, J. G.*; Park, J. M.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Kim, H. S.*
Materialia, 9, p.100619_1 - 100619_15, 2020/03
In the present study, an integrated experimental-numerical analysis on ferrous medium-entropy alloy (FMEA) was conducted to understand the micromechanical response of the constituent phases in the FMEA at -137C. The initial face-centered cubic (FCC) single phase microstructure of the FMEA was transformed to body-centered cubic (BCC) martensite during tensile deformation at -137
C, resulting in improved low-temperature mechanical properties. The microstructure evolution due to deformation-induced phase transformation mechanism and strain partitioning behavior was analyzed using
electron backscatter diffraction. The mechanical responses related to the stress partitioning between constituent phases and deformation-induced transformation rate were measured using
neutron diffraction in combination with the nanoindentation analysis.
Kim, J.*; 山中 暁*; 村山 一郎*; 加藤 孝典*; 坂本 友和*; 川崎 卓郎; 福田 竜生; 関野 徹*; 中山 忠親*; 武田 雅敏*; et al.
Sustainable Energy & Fuels (Internet), 4(3), p.1143 - 1149, 2020/03
被引用回数:21 パーセンタイル:64.07(Chemistry, Physical)Waste heat is a potentially exploitable energy source but remains a problem awaiting a solution. To explore solutions for automobile applications, we investigate pyroelectric power generation from the temperature variation of exhaust gas using a novel electro-thermodynamic cycle. Niobium-doped lead zirconate titanate stannate (PNZST) ceramics were applied as pyroelectric materials, and their structural characteristics were investigated. In the driving cycle assessments (JC-08) using real exhaust gas, the maximum power generated was identified as 143.9 mW cm (777.3 J L
per 1 cycle) over a temperature range of 150-220
C and an electric field of 13 kV cm-1. The net mean generating power of the total driving cycle was 40.8 mW cm
, which is the most enhanced result in our power generating systems to date and 314 times greater than our first report. Materials with sharp transition behaviors with the temperature and electric field are worthy of study with regard to pyroelectric energy harvesting materials, and their corresponding crystal and domain structures were investigated to optimize performance.