検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 378 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Improvement in the elution performance of an N,N,N',N-tetraoctyl diglycolamide impregnated extraction chromatography adsorbent using neodymium via micro-particle-induced X-ray emission analysis

高畠 容子; 渡部 創; 新井 剛*; 佐藤 隆博*; 柴田 淳広

Applied Radiation and Isotopes, 196, p.110783_1 - 110783_5, 2023/06

 被引用回数:0 パーセンタイル:0.01(Chemistry, Inorganic & Nuclear)

An adsorbent used for the recovery of trivalent minor actinides (MA(III); Am and Cm) from high level liquid waste generated from reprocessing of spent nuclear fuel was subjected to micro-PIXE analysis to improve its elution performance. The experimental adsorbent comprised SiO$$_{2}$$ particles, a polymer coating, and an TODGA. The particles to be analyzed were subjected to Nd adsorption and an elution operation, but Nd in the adsorbent was found to be uniformly distributed. This might have been caused by individual differences in the amount of impregnated TODGA. The remaining Nd species were not localized to a specific part of the adsorbent after the adsorption operation. Some Nd elements were retained in the adsorbent after elution, probably because of the poor diffusion of the mobile phase inside the adsorbent. An adsorbent having a different microstructure from the first was then evaluated, and rapid elution was observed on new adsorbent along micro-PIXE analysis

論文

Ion beam induced luminescence of complexes formed in adsorbent for MA recovery process

渡部 創; 片井 雄也*; 松浦 治明*; 加田 渉*; 江夏 昌志*; 佐藤 隆博*; 新井 剛*

Nuclear Instruments and Methods in Physics Research B, 450, p.61 - 65, 2019/07

 被引用回数:2 パーセンタイル:23.44(Instruments & Instrumentation)

Ion-beam induced luminescence (IBIL) analysis on MA recovery adsorbent was performed to give chemical states of complexes formed in the adsorbent as fundamental information for process design, and EXAFS analysis was also carried out to support discussions. The IBIL spectra of the binary extractants system seemed to be superposition of individual ones, however it has also original peaks. As intensities of those peaks rapidly decreased with iteration time of measurements and the original peaks were not observed for the adsorbent without charging Eu(III), they were attributed to complexes of Eu(III) with organic compounds. Contributions of CMPO and HDEHP extractants for Eu(III) extraction must be not only individual ones but also cooperative.

論文

Micro-PIXE analysis study of ferrite products synthesized from simulated radioactive liquid waste containing chemical hazardous elements

阿部 智久; 嶋崎 竹二郎; 大杉 武史; 中澤 修; 山田 尚人*; 百合 庸介*; 佐藤 隆博*

QST-M-16; QST Takasaki Annual Report 2017, P. 140, 2019/03

フェライト処理による有害元素の固定化技術の開発のため、固定化性能に影響を及ぼす可能性のある陰イオンを分析する必要がある。本研究では、異なる金属元素を複数の鉄源を用いて合成したフェライトのマイクロPIXE分析を行い、合成したフェライトの違いを組成の観点から明らかにすることを試みた。元素のマッピングデータとピクセルごとの信号強度の相関をとった結果、Agでは、陰イオンの分布がいずれも0に近い部分に分布していた。また、Pbでは横軸に広がった分布となっており、Crでは縦軸に広がった分布となった。今回の結果では、陰イオンの種類ではなく、対象とする金属元素により分布の相関に違いがあることがわかった。

論文

Complexation of Eu(III), Pb(II), and U(VI) with a ${{it Paramecium}}$ glycoprotein; Microbial transformation of heavy elements in the aquatic environment

香西 直文; 坂本 文徳; 田中 万也; 大貫 敏彦; 佐藤 隆博*; 神谷 富裕*; Grambow, B.

Chemosphere, 196, p.135 - 144, 2018/04

 被引用回数:3 パーセンタイル:14.3(Environmental Sciences)

バクテリアや菌類等の微生物が環境中で重元素の化学状態を変化させることは知られているが、原生動物の作用についてはほとんど未解明である。本研究では、代表的な原生動物であるゾウリムシと水中のEu(III), Pb(II), U(VI)の反応を調べた。micro-PIXEを用いた非破壊分析では、ゾウリムシ生細胞に吸着した重元素はほとんど検出できなかったが、死滅細胞へは明らかな吸着が認められた。生細胞の細胞表面から自然に溶出する糖タンパク質と重元素が結合して擬似コロイドとなることを見いだした。本来は細胞に吸着するはずの元素が糖タンパク質と錯形成し水溶性の擬似コロイドとなることにより、生細胞への吸着が低下したことが示唆される。

論文

Application of ferrite process to radioactive waste; Study of ferrite product stability by micro-PIXE analysis

阿部 智久; 嶋崎 竹二郎; 大杉 武史; 山田 尚人*; 百合 庸介*; 佐藤 隆博*

QST-M-8; QST Takasaki Annual Report 2016, P. 61, 2018/03

本研究では、フェライト処理による有害な元素の固定化技術の開発のために、目的元素によるフェライト生成物の違いを明らかにすることを目指す。フェライト生成物には原料由来の軽元素が含まれるため、組成分析にマイクロPIXE分析の適用を試みた。Pb及びCrの有害元素含有廃液をフェライト処理し、その生成物を試料としてXRDによる構造解析、PIXEによる組成分析を実施した。測定の結果、フェライトが同一構造をとっているにも関わらず、PbでのみSが検出された。本研究によって、目的元素を変えることによって、同一のフェライト構造をとるのにも関わらず、組成に違いが表れることが分かった。今後は、Sが構造に果たしている役割について調査し、有害元素の固定化性能への影響を明らかにする。

論文

Fabrication of neutron optical devices using PBW technique

酒井 卓郎; 飯倉 寛; 山田 尚人*; 佐藤 隆博*; 石井 保行*; 内田 正哉*

QST-M-8; QST Takasaki Annual Report 2016, P. 140, 2018/03

In this work, we report on the application of a UV/EB curable resin, in proton beam writing (PBW) for the fabrication of fine neutron optics devices. The resin is a liquid at room temperature; therefore, it mixes easily with functional materials, such as neutron absorbers. However, 20-30 $$mu$$m thick neutron absorber must be required as the grating materials. So PBW is a promising technique to fabricate the neutron devices. The fabrication process is similar to lithography. The neutron absorber is gadolinium oxide (Gd$$_{2}$$O$$_{3}$$). Pattern exposures are performed using 3 MeV proton beams approximately 1 $$mu$$m in diameter. The irradiated areas are quickly cured by polymerization. The fabricated gratings were observed using an optical microscope. The microscopic images show that the patterns of the fabricated structures agree well with the original one. In addition, a lateral direction of the sample was observed using the scanning electron microscope (SEM). The thickness of the sample is approximately 35 $$mu$$m. In conclusion, the fabrication of grating structures is successful and the results also proved that the UV/EB curable resin is very promising material for use in PBW micromachining.

論文

Micro-PIXE analysis on adsorbent of extraction chromatography for MA(III) recovery

高畠 容子; 渡部 創; 小藤 博英; 竹内 正行; 野村 和則; 佐藤 隆博*

International Journal of PIXE, 26(3&4), p.73 - 83, 2017/09

BB2016-1248.pdf:0.36MB

次世代再処理ガラス固化技術基盤研究で技術開発を行っている吸着ガラスについて、開発の対象とする抽出クロマトグラフィ技術に用いる吸着材の吸着元素分布情報をマイクロPIXE分析により明らかにすることを検討している。本研究では高レベル放射性廃液の模擬液をカラム法にて吸着並びに吸着/溶離した吸着材を用いて、実使用に即した条件下での吸着材の元素分布情報取得に対するマイクロPIXE技術の適用性評価を行った。検討に供した吸着材はCMPO/SiO$$_{2}$$-P吸着材及びHDEHP/SiO$$_{2}$$-P吸着材であり、分析には高崎量子応用研究所のシングルエンド加速器を用いた。分析結果より、カラム内での吸着バンドの形成や溶離後に吸着材に残留する元素の存在を確認できた。これより、マイクロPIXE分析を吸着材性能の定性的な評価に適用することが期待できた。

論文

Local structure and distribution of remaining elements inside extraction chromatography adsorbents

渡部 創; 佐野 雄一; 塩飽 秀啓; 矢板 毅; 大野 真平*; 新井 剛*; 松浦 治明*; 江夏 昌志*; 佐藤 隆博*

Nuclear Instruments and Methods in Physics Research B, 404, p.202 - 206, 2017/08

 被引用回数:3 パーセンタイル:29.14(Instruments & Instrumentation)

Extraction chromatography is one of the most promising technology for minor actinide (MA(III): Am and Cm) recovery from high level liquid waste generated in the reprocessing. A brand-new adsorbent proposed by our group are expected to achieve more efficient MA(III) recovery than usual procedure. Fundamental MA(III) adsorption/elution performances of the adsorbents have been demonstrated. An appropriate washing process of lanthanides (Ln(III)) is necessary to be established to design a process flow. In this study, chemical state and distribution of Eu inside the adsorbent before and after contacting with candidate eluents for MA(III) or Ln(III) were evaluated by EXAFS measurements and micro-PIXE analysis, respectively. Two-dimensional PIXE images showed that adsorbed Eu and residual Eu after contacting with the eluents for MA(III) were uniformly distributed on the particle. However, EXAFS oscillation revealed that local structure around Eu drastically changes by the contact. Those results suggest that the Eu remained inside the particle without distinct shift and that they form various complexes with extractants in the particle.

論文

Microscopic analyses of complexes formed in adsorbent for Mo and Zr separation chromatography

安倍 諒治*; 名越 航平*; 新井 剛*; 渡部 創; 佐野 雄一; 松浦 治明*; 高木 秀彰*; 清水 伸隆*; 江夏 昌志*; 佐藤 隆博*

Nuclear Instruments and Methods in Physics Research B, 404, p.173 - 178, 2017/08

 被引用回数:5 パーセンタイル:44.94(Instruments & Instrumentation)

Molybdenum and zirconium obstruct the efficient recovery of minor actinides (MA(III): Am(III) and Cm(III)) by extraction chromatography; hence, the removal of these elements prior to MA(III) recovery is desirable. The use of an adsorbent impregnated with bis(2-ethylhexyl) hydrogen phosphate (HDEHP) for Mo and Zr decontamination was evaluated in this report. The adsorption/elution and column separation experiments showed that Mo and Zr in the simulated HLLW were selectively adsorbed on the particles, and that Mo was eluted by H$$_{2}$$O$$_{2}$$. EXAFS analysis and SAXS patterns of the adsorbent containing Zr revealed that the Zr-HDEHP complex had a crystal-like periodic structure similar to the structure of the precipitate produced in the solvent extraction system. Micro-PIXE analysis revealed that distribution of the residual Zr on the adsorbent was uniform.

論文

Element distribution measurement in incineration ash using micro-PIXE analysis

阿部 智久; 嶋崎 竹二郎; 中山 卓也; 大曽根 理; 大杉 武史; 中澤 修; 百合 庸介*; 山田 尚人*; 佐藤 隆博*

QST-M-2; QST Takasaki Annual Report 2015, P. 83, 2017/03

本研究では、有害物質の溶出を抑制した焼却灰のセメント固化技術を開発するために、焼却灰をセメント固化した際の固化時における焼却灰からセメントへの有害物質の移動及び固化されたセメント固化体から溶出する有害物質の移動を明らかにすることを目指す。研究の第一段階として、マイクロPIXEにより焼却灰粒子を測定し、その違いを検出することを試みた。試料には模擬灰を使用し、粒子を樹脂材に包埋することで、測定試料として作製した。マイクロPIXE測定の結果、焼却灰粒子の数十マイクロメーターの範囲で2つの粒子の組成の違いを検出することができた。セメント固化に影響を与える硫黄等の軽元素についても検出できたため、焼却灰と固化の影響について今後検討したいと考えている。

論文

Corrigendum: Beam range estimation by measuring bremsstrahlung (2012 Phys. Med. Biol. 57 2843)

山口 充孝; 鳥飼 幸太*; 河地 有木; 島田 博文*; 佐藤 隆博; 長尾 悠人; 藤巻 秀; 国分 紀秀*; 渡辺 伸*; 高橋 忠幸*; et al.

Physics in Medicine & Biology, 61(9), p.3638 - 3644, 2016/05

 被引用回数:9 パーセンタイル:100(Engineering, Biomedical)

2012年にPhys. Med. Biol.誌にアクセプトされた原著論文("Beam range estimation by measuring bremsstrahlung", Phys. Med. Biol. 57 (2012) 2843)について、計算コードPHITSを用いた水中での炭素イオンの飛程に関して再計算したところ、飛程の値に間違いが見つかった。今後、制動輻射を用いたビームモニタリングに関する研究を行う上で無視することができない差異であるため、関連する記述内容も含め、訂正した原稿を投稿する。

報告書

軽イオンマイクロビーム分析/加工システムの改良

江夏 昌志; 石井 保行; 山田 尚人; 大久保 猛; 加田 渉*; 喜多村 茜; 岩田 吉弘*; 神谷 富裕; 佐藤 隆博

JAEA-Technology 2016-006, 41 Pages, 2016/03

JAEA-Technology-2016-006.pdf:14.03MB

日本原子力研究開発機構原子力科学研究部門高崎量子応用研究所のイオン照射研究施設では、これまでに、3MVシングルエンド加速器におけるMeV級軽イオンマイクロビームによる高空間分解能な局所元素分析・加工システムの開発を行ってきた。ここでは、加速器、ビーム輸送ライン及びマイクロビーム形成装置などの主構成機器に加えて、マイクロPIXE/PIGE(Particle Induced X-ray/Gamma-ray Emission)分析、三次元元素分布分析(PIXE-CT: Computed Tomography)、イオン誘起発光分析(IBIL: Ion Beam Induced Luminescence)及び微細加工(PBW: Proton Beam Writing)への応用研究に用いるための付帯装置・治具類に関する技術的な改良について、これらの機器・装置等の概要とともに纏める。

論文

Particle induced X-ray emission-computed tomography analysis of an adsorbent for extraction chromatography

佐藤 隆博; 横山 彰人; 喜多村 茜; 大久保 猛; 石井 保行; 高畠 容子; 渡部 創; 駒 義和; 加田 渉*

Nuclear Instruments and Methods in Physics Research B, 371, p.419 - 423, 2016/03

 被引用回数:7 パーセンタイル:55.37(Instruments & Instrumentation)

The cross-sectional distribution of neodymium (Nd) simulating minor actinides (MA) in a minute globular adsorbent of less than 50 $$mu$$m in diameter was measured using PIXE (particle induced X-ray emission)-CT (computed tomography) with a 3-MeV proton microbeam for the investigation of residual MA in extraction chromatography of spent fast reactor fuel. The measurement area was 100 $$times$$ 100 $$mu$$m$$^2$$ corresponding to 128 $$times$$ 128 pixels of projection images. The adsorbent target was placed on an automatic rotation stage with 9$$^{circ}$$ step. Forty projections of the adsorbent were finally measured, and image reconstruction was carried out by the modified ML-EM (maximum likelihood expectation maximization) method. As a result, the cross-sectional distribution of Nd in the adsorbent was successfully observed, and it was first revealed that Nd remained in the region corresponding to internal cavities of the adsorbent even after an elution process. This fact implies that the internal structure of the adsorbent must be modified for the improvement of the recovery rate of MA.

論文

Ionoluminescence analysis of glass scintillators and application to single-ion-hit real-time detection

横山 彰人; 加田 渉*; 佐藤 隆博; 江夏 昌志; Shimada, Keisuke*; 横田 佑也*; 三浦 健太*; 花泉 修*

Nuclear Instruments and Methods in Physics Research B, 371, p.340 - 343, 2016/03

 被引用回数:6 パーセンタイル:49.65(Instruments & Instrumentation)

サイクロトロンでは、数百MeV級の重イオンマイクロビームを用いたシングルイオンヒット技術が生物細胞の照射実験で利用されており、高精度での位置検出が必要である。本研究では、ビーム照射によって誘起される発光(Ion luminescence: IL)を利用したリアルタイム検出法により、CaF:Eu, イメージインテンシファイア(I.I.), 観察用カメラ及び倒立型焦点顕微鏡を組み合わせた発光検出システムを開発した。しかし、位置分解能に関しては、I.I.の映像増強機構であるマイクロチャンネルプレートの直径6$$mu$$m以下にならないことが課題であった。そこで、発光検出システムのI.I.と観察用カメラを、対物レンズの倍率により分解能を調整できる電子増倍型(EMCCD)カメラに置き換える改良を行った。また、発光ピーク波長が435nmのCaF:Euを、EMCCDカメラの量子効率が90%以上の542nmに最も強い発光ピークを持つようにTbを添加した透明なガラス材料(G2000: 住田光学ガラス社)に替えた。この材料の1点を狙って260-MeV Neマイクロビームを3個/秒で照射した結果、隣接する数個のピクセルでILを捕捉できた。その重心ピクセルにおける発光強度は、ノイズ強度の140倍大きいため、1個/秒のイオン照射によるILでも補足可能と判断した。また、重心ピクセルを通る線上(水平方向と垂直方向)の強度分布から得たピークの半値幅は、それぞれの方向で4.5$$mu$$mであった。これは実測に基づくビーム径とほぼ一致しており、改良された発光検出システムはシングルイオンヒットによるILを直径数$$mu$$mの位置分解能でリアルタイム検出できることがわかった。

論文

Detection of a gas region in a human body across a therapeutic carbon beam by measuring low-energy photons

山口 充孝; 長尾 悠人; 河地 有木; 佐藤 隆博; 藤巻 秀; 神谷 富裕; 鳥飼 幸太*; 島田 博文*; 菅井 裕之*; 酒井 真理*; et al.

International Journal of PIXE, 26(1&2), p.61 - 72, 2016/00

炭素線治療中にその軌道上の生体組織内で発生する局所的密度減少は、ブラッグピーク位置のシフトを引き起こし、誤照射の原因となる。この密度減少を炭素線照射中に確認できれば、誤照射を軽減する対策が立てられる。そこで、重粒子線治療で発生する二次電子による制動輻射のうち、発生量が多く効率的測定が可能な低エネルギー光子(63-68keV)による生体内の局所的密度減少の検出方法を開発している。今回、空気間隙による密度減少の存在の検出が可能かどうかをPHITSコードを用いたモンテカルロシミュレーションにより次のように評価した。ビーム軸方向の長さが50mm、奥行き200mm、高さ200mmのアクリルブロック2個を、ビーム軸方向に10mmの間隙を設けて設置した。また、検出器として、幅2.4mmのスリットを持つ鉛製コリメータとテルル化カドミウム製の検出素子を組み合わせた。炭素線を照射した際にビーム軸に対して垂直方向に放出される63-68keVの光子を検出したところ、その検出量に明らかな増減が確認できた。この結果は、間隙の存在を十分検出することが可能であることを示す。

論文

TIARA静電加速器の現状

薄井 絢; 千葉 敦也; 山田 圭介; 横山 彰人; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; 橋爪 将司*; et al.

第28回タンデム加速器及びその周辺技術の研究会報告集, p.117 - 119, 2015/12

原子力機構高崎量子応用研究所のイオン照射施設(TIARA)の3MVタンデム加速器、400kVイオン注入装置、3MVシングルエンド加速器の平成26年度における運転と整備の状況を報告する。シングルエンド加速器は、昇圧系トラブルによる2日間の研究利用運転の中止があったが、他の2台は、平成26年度に続き100%の稼働率を維持した。また、タンデム加速器はCoイオン(~12MeV, 3価)を新たに利用可能イオン種に加えた。タンデム加速器では、ターミナルの電圧安定度が極端に低下(1E-4以下)する現象について対策を講じた。加速電圧は、高電圧ターミナルの電圧測定値と電圧設定値の差分をもとに、ターミナルに蓄積される電荷量を制御することで安定に保たれる。電圧安定度の低下は、加速器のグランドベース(フレーム)から電源アースやCAMAC電源筐体を経由して電圧設定値の信号に誘導される100Hzの電源高調波ノイズが原因であると分かった。そこで、絶縁シートを用いて電源筐体とフレームの電気的絶縁及び電源アースの切り離しを試みた。その結果、電圧設定値の信号に誘導されていた100Hzのノイズが減少し、電圧安定度は2E-5程度に回復した。

論文

In-situ monitoring of ion-beam luminescence of Si-O-C(-H) ceramics under proton-beam irradiation

成澤 雅紀*; 江夏 昌志; 武山 昭憲; 杉本 雅樹; 出崎 亮; 佐藤 隆博; 外薗 洋樹*; 河相 武利*; 岩瀬 彰宏*

Journal of the Ceramic Society of Japan, 123(9), p.805 - 808, 2015/09

Two kinds of Si-O-C(-H) ceramics particles having intrinsic photoluminescence (PL) spectra were prepared from silicone resin microspheres by heat treatment in a hydrogen atmosphere at 800 or 1100$$^{circ}$$C. The obtained particles were painted on a Si substrate using a binder, and ion-beam-luminescence spectra were observed under proton beam irradiation with an acceleration energy in the ranges of 1-3 MeV. Observed spectra had peaks at wavelength of 520-540 nm. These peak wavelengths were larger than those observed under UV light irradiation. The luminescence of H$$_{2}$$ 1100 (sample decarbonized at 1100$$^{circ}$$C) was bright, and that of H$$_{2}$$ 800 (sample decarbonized at 800$$^{circ}$$C) was faint. However, the intensity of luminescence decreased rapidly at an early stage of the beam irradiation. In air, a sharp luminescence band with a peak at 300 nm appeared together with the main emission with a peak in the range of 520-540 nm. The existence of the sharp band at 300 nm was apparent in the H$$_{2}$$ 800 spectra, whereas it appeared as a minor peak in the H$$_{2}$$ 1100 spectra in air.

論文

原子力機構TIARA施設の現状

湯山 貴裕; 石堀 郁夫; 倉島 俊; 吉田 健一; 石坂 知久; 千葉 敦也; 山田 圭介; 横山 彰人; 薄井 絢; 宮脇 信正; et al.

Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.302 - 304, 2015/09

日本原子力研究開発機構のイオン照射施設TIARAでは4台の加速器により、材料・バイオ技術の研究開発への利用を主として、広範囲のエネルギー及び多様なイオン種のビームを提供している。本発表では2014年度のTIARAの稼働状況、保守・整備及び技術開発を報告する。保守・整備及び技術開発の主要な内容を以下に示す。サイクロトロンの高周波系において、ショート板用接触子に焼損が発生したため、接触子の交換及び焼損箇所の研磨を行うことで復旧させた。原因調査の結果、経年劣化によりフィードバックケーブルが断線しかかっていたため、不必要な高電圧が印加されたことが原因と判明した。サイクロトロン制御システムに関して、サポートが停止されたWindows XPをWindows 7に変更し、これに伴い制御システムを更新するとともに、トレンドグラフのログデータ保存機能、操作画面上の制御対象一括選択機能の付加など、各種機能を向上させた。C$$_{60}$$イオンビームの計測に関して、複雑な二次荷電粒子を生成するC$$_{60}$$イオンビームの正確な電流測定のために、サプレッサー電極の構造を改良することで二次荷電粒子を十分捕集するファラデーカップを開発した。

論文

Fabrication of microstructures embedded in SC-CVD diamond with a focused proton microbeam

加田 渉*; 神林 佑哉*; 三浦 健太*; 猿谷 良太*; 久保田 篤志*; 佐藤 隆博; 江夏 昌志; 神谷 富裕; 花泉 修*

Key Engineering Materials, 643, p.15 - 19, 2015/05

Micro-processing procedures have been extensively studied using a Proton Beam Writing (PBW) technique in order to fabricate two or three dimensional microscopic patterns in single-crystal chemical vapor deposition (SC-CVD) diamonds. In this study, various microscopic patterns were drawn on SC-CVD diamonds (3.0 mm $$times$$ 3.0 mm $$times$$ 0.5 mm IIa single-crystal) at various fluences with PBW using 0.75 and 3 MeV proton beams. The beam conditions of PBW other than the beam energy were as follows; a beam size of 1 $$mu$$m, a scanning area of 800 $$mu$$m $$times$$ 800 $$mu$$m and beam current of up to 100 pA. From the result of the observations based on the optical and electrical modification of SC-CVD, the microscopic patterns were fabricated in the diamonds by the micro-processing procedure varying fluence and beam energy. This result demonstrated that the micro-processing procedure with PBW enables us to fabricate the two or three dimensional microscopic patterns, which are optically and electrically modified, in SC-CVD diamonds by optimizing fluence and beam energy.

論文

Development of microbeam technology to expand applications at TIARA

神谷 富裕; 佐藤 隆博; 江夏 昌志; 加田 渉*

Nuclear Instruments and Methods in Physics Research B, 348, p.4 - 7, 2015/04

 被引用回数:5 パーセンタイル:40.2(Instruments & Instrumentation)

Ion microbeam technology has been progressed at TIARA, aiming at expanding its applications. Micro-analyses of micro-PIGE and micro-IBIL (Ion Beam Induced Luminescence) based on the micro-PIXE have expanded a region of their analyzing objects. Micro-fabrication by mask-less irradiation on materials based on the technique of PBW (Proton Beam Writing) without etching processes was applied for optical, magnetic or other novel micro-devices fabrication. Single-ion-hitting technique which was required for reliable irradiation to biological cells or semiconductor devices progressed so that each ion hit could be monitored in real time using an efficient scintillator and a high sensitivity camera. Development of a thin film type particle detector was newly started for the same purpose. This paper summarizes the latest progress of the ion microbeam technology and applications at TIARA, and discusses their future prospects.

378 件中 1件目~20件目を表示