Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 22

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2021

Nakada, Akira; Kanai, Katsuta; Kokubun, Yuji; Nagaoka, Mika; Koike, Yuko; Yamada, Ryohei*; Kubota, Tomohiro; Hirao, Moe; Yoshii, Hideki*; Otani, Kazunori*; et al.

JAEA-Review 2022-079, 116 Pages, 2023/03

JAEA-Review-2022-079.pdf:2.77MB

Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2021. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2020

Nakano, Masanao; Nakada, Akira; Kanai, Katsuta; Nagaoka, Mika; Koike, Yuko; Yamada, Ryohei; Kubota, Tomohiro; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; et al.

JAEA-Review 2021-040, 118 Pages, 2021/12

JAEA-Review-2021-040.pdf:2.48MB

Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2020. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

Journal Articles

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

 Times Cited Count:44 Percentile:96.99(Astronomy & Astrophysics)

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 $$^{circ}$$C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 $$^{circ}$$C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2019

Nakano, Masanao; Fujii, Tomoko; Nagaoka, Mika; Koike, Yuko; Yamada, Ryohei; Kubota, Tomohiro; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; Kikuchi, Masaaki*; et al.

JAEA-Review 2020-070, 120 Pages, 2021/02

JAEA-Review-2020-070.pdf:2.47MB

Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2019. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2018

Nakano, Masanao; Fujii, Tomoko; Nagaoka, Mika; Inoue, Kazumi; Koike, Yuko; Yamada, Ryohei; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; Kikuchi, Masaaki*; et al.

JAEA-Review 2019-045, 120 Pages, 2020/03

JAEA-Review-2019-045.pdf:2.54MB

Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2018. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2017

Nakano, Masanao; Fujita, Hiroki; Mizutani, Tomoko; Nagaoka, Mika; Inoue, Kazumi; Koike, Yuko; Yamada, Ryohei; Yoshii, Hideki*; Hiyama, Yoshinori*; Otani, Kazunori*; et al.

JAEA-Review 2018-028, 120 Pages, 2019/02

JAEA-Review-2018-028.pdf:2.69MB

Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2017. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2016

Nakano, Masanao; Fujita, Hiroki; Nagaoka, Mika; Inoue, Kazumi; Koike, Yuko; Yoshii, Hideki*; Hiyama, Yoshinori*; Otani, Kazunori*; Kikuchi, Masaaki*; Sakauchi, Nobuyuki*; et al.

JAEA-Review 2017-037, 119 Pages, 2018/03

JAEA-Review-2017-037.pdf:2.58MB

Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and bylaw of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2016. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

JAEA Reports

Annual report on the effluent control of low level liquid waste in Nuclear Fuel Cycle Engineering Laboratories FY2015

Nakano, Masanao; Fujita, Hiroki; Kono, Takahiko; Nagaoka, Mika; Inoue, Kazumi; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; Kikuchi, Masaaki*; Sakauchi, Nobuyuki*; et al.

JAEA-Review 2017-001, 115 Pages, 2017/03

JAEA-Review-2017-001.pdf:3.57MB

Based on the regulations (the safety regulation of Tokai reprocessing plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and bylaw of Ibaraki prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2015. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.

Journal Articles

HCM12A Cr-rich oxide layer investigation using 3D atom probe

Kikuchi, Kenji*; Okada, Noriyuki*; Kato, Mikio*; Uchida, Hiroshi*; Saito, Shigeru

Journal of Nuclear Materials, 450(1-3), p.237 - 243, 2014/07

 Times Cited Count:3 Percentile:23.66(Materials Science, Multidisciplinary)

Three-dimensional atom probe techniques were applied to the investigation on the oxide scale in 12Cr ferritic-martensitic steel, HCM12A. A duplex oxide scale was formed in lead bismuth eutectic at 450-500$$^{circ}$$C, during 5500 h. Samples were located 500-700 nm away from the boundary between magnetite and Fe-Cr spinel layers, while the total oxide layer thickness is 18 $$mu$$m. It detected super enrichment of Cr with a size of ten nm roughly, as well as depletion of Fe and enrichment of O at the same site. Surrounding the Cr super enrichment area, enrichment of Si was newly noticed due to the scanned profile of detected atom counts. It is also confirmed that Pb and Bi concentration in the observed spinel region is almost null or less than 0.01 atomic percent, which is possible detecting lowest limit.

Journal Articles

Detailed analyses of key phenomena in core disruptive accidents of sodium-cooled fast reactors by the COMPASS code

Morita, Koji*; Zhang, S.*; Koshizuka, Seiichi*; Tobita, Yoshiharu; Yamano, Hidemasa; Shirakawa, Noriyuki*; Inoue, Fusao*; Yugo, Hiroaki*; Naito, Masanori*; Okada, Hidetoshi*; et al.

Nuclear Engineering and Design, 241(12), p.4672 - 4681, 2011/12

 Times Cited Count:15 Percentile:73.66(Nuclear Science & Technology)

A five-year research project has been initiated in 2005 to develop a code based on the MPS (Moving Particle Semi-implicit) method for detailed analysis of key phenomena in core disruptive accidents (CDAs) of sodium-cooled fast reactors (SFRs). The code is named COMPASS (Computer Code with Moving Particle Semi-implicit for Reactor Safety Analysis). The key phenomena include (1) fuel pin failure and disruption, (2) molten pool boiling, (3) melt freezing and blockage formation, (4) duct wall failure, (5) low-energy disruptive core motion, (6) debris-bed coolability, (7) metal-fuel pin failure. Validation study of COMPASS is progressing for these key phenomena. In this paper, recent COMPASS results of detailed analyses for the several key phenomena are summarized. The present results demonstrate COMPASS will be useful to understand and clarify the key phenomena of CDAs in SFRs in details.

Journal Articles

COMPASS code development; Validation of multi-physics analysis using particle method for core disruptive accidents in sodium-cooled fast reactors

Koshizuka, Seiichi*; Morita, Koji*; Arima, Tatsumi*; Tobita, Yoshiharu; Yamano, Hidemasa; Ito, Takahiro*; Naito, Masanori*; Shirakawa, Noriyuki*; Okada, Hidetoshi*; Uehara, Yasushi*; et al.

Proceedings of 8th International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUTHOS-8) (CD-ROM), 11 Pages, 2010/10

In this paper, FY2009 results of the COMPASS code development are reported. Validation calculations for melt freezing and blockage formation, eutectic reaction of metal fuel, duct wall failure (thermal-hydraulic analysis), fuel pin failure and disruption and duct wall failure (structural analysis) are shown. Phase diagram calculations, classical and first-principles molecular dynamics were used to investigate physical properties of eutectic reactions: metallic fuel/steel and control rod material/steel. Basic studies for the particle method and SIMMER code calculations supported the COMPASS code development. COMPASS is expected to clarify the basis of experimentally-obtained correlations used in SIMMER. Combination of SIMMER and COMPASS will be useful for safety assessment of CDAs as well as optimization of the core design.

Journal Articles

Laser ceramic materials for subpicosecond solid-state lasers using Nd$$^{3+}$$ -doped mixed scandium garnets

Okada, Hajime; Tanaka, Momoko; Kiriyama, Hiromitsu; Nakai, Yoshiki*; Ochi, Yoshihiro; Sugiyama, Akira; Daido, Hiroyuki; Kimura, Toyoaki*; Yanagitani, Takagimi*; Yagi, Hideki*; et al.

Optics Letters, 35(18), p.3048 - 3050, 2010/09

 Times Cited Count:14 Percentile:55.79(Optics)

Journal Articles

Detailed analyses of specific phenomena in core disruptive accidents of sodium-cooled fast reactors by the COMPASS code

Morita, Koji*; Zhang, S.*; Arima, Tatsumi*; Koshizuka, Seiichi*; Tobita, Yoshiharu; Yamano, Hidemasa; Ito, Takahiro*; Shirakawa, Noriyuki*; Inoue, Fusao*; Yugo, Hiroaki*; et al.

Proceedings of 18th International Conference on Nuclear Engineering (ICONE-18) (CD-ROM), 9 Pages, 2010/05

A five-year research project has been initiated in 2005 to develop a code based on the MPS (Moving Particle Semi-implicit) method for detailed analysis of specific phenomena in core disruptive accidents (CDAs) of sodium-cooled fast reactors (SFRs). The code is named COMPASS (Computer Code with Moving Particle Semi-implicit for Reactor Safety Analysis). The specific phenomena include (1) fuel pin failure and disruption, (2) molten pool boiling, (3) melt freezing and blockage formation, (4) duct wall failure, (5) low-energy disruptive core motion, (6) debris-bed coolability, and (7) metal-fuel pin failure. Validation study of COMPASS is progressing for these key phenomena. In this paper, recent COMPASS results of detailed analyses for the several specific phenomena are summarized.

Journal Articles

Validation for multi-physics simulation of core disruptive accidents in sodium-cooled fast reactors by COMPASS code

Koshizuka, Seiichi*; Morita, Koji*; Arima, Tatsumi*; Zhang, S.*; Tobita, Yoshiharu; Yamano, Hidemasa; Ito, Takahiro*; Naito, Masanori*; Shirakawa, Noriyuki*; Okada, Hidetoshi*; et al.

Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-13) (CD-ROM), 11 Pages, 2009/09

Dispersion and freezing of molten core material was calculated by the COMPASS code to compare with the experimental data of GEYSER. Molten core material flowed up with freezing on the pipe inner surface. As a molten pool behavior, CABRI-TPA2 experiment was analyzed, where a sphere of solid steel was surrounded by solid fuel. Power was injected to cause melting and boiling of the steel sphere. SCARABEE-BE+3 test was analyzed by COMPASS as a validation of failure of duct walls.

Journal Articles

Next generation safety analysis methods for SFRs, 6; SCARABEE BE+3 analysis with SIMMER-III and COMPASS codes featuring duct-wall failure

Uehara, Yasushi*; Shirakawa, Noriyuki*; Naito, Masanori*; Okada, Hidetoshi*; Yamano, Hidemasa; Tobita, Yoshiharu; Yamamoto, Yuichi*; Koshizuka, Seiichi*

Proceedings of 17th International Conference on Nuclear Engineering (ICONE-17) (CD-ROM), 10 Pages, 2009/06

A mesoscopic approach with the COMPASS code is expected to advance the understanding of key phenomena during event progression in core disruptive accidents. In this paper, the overall analysis of SCARABEE-BE+3 test with the SIMMER-III is described as well as the simulation with COMPASS, focusing on the duct wall failure in a small temporal and spatial window cut from the SIMMER-III analysis results.

Journal Articles

Code development for multi-physics and multi-scale analysis of core disruptive accidents in fast reactors using particle methods

Koshizuka, Seiichi*; Morita, Koji*; Arima, Tatsumi*; Zhang, S.*; Tobita, Yoshiharu; Yamano, Hidemasa; Ito, Takahiro*; Shirakawa, Noriyuki*; Naito, Masanori*; Okada, Hidetoshi*; et al.

Proceedings of 16th Pacific Basin Nuclear Conference (PBNC-16) (CD-ROM), 6 Pages, 2008/10

A computer code, named COMPASS, is being developed for various complex phenomena of core disruptive accidents (CDAs) in sodium-cooled fast reactors (SFRs). The COMPASS is designed to analyze multi-physics problems involving thermal hydraulics, structure and phase change, in a unified framework of the MPS (Moving Particle Semi-implicit) method. The project has been carried out by six organizations for five years from FY2005 to FY2009. In this paper, the outcomes of the project in FY2007 are presented. Three validation calculations were completed by following the validation plan: melt freezing and blockage formation, molten pool boiling, and duct wall failure. The COMPASS code development was supported by basic studies of the numerical method, material science for eutectic reaction of the metal fuel, and SIMMER-III analyses.

JAEA Reports

Scattering Profiles of Sparks and Combustibility of Filter against Hot Sparks

Tobita, Noriyuki; Okada, Takashi; Kashiro, Kashio; Matsumoto, Masaki; Watahiki, Masatoshi; Nakata, Keiji*; Gonnokami, Kiyomi*

JNC TN8430 2004-001, 125 Pages, 2004/12

JNC-TN8430-2004-001.pdf:143.53MB

An event that a pre-filter burned on fire took place in the glove box dismantlement facility of Plutonium Production Facility, on April 21, 2003. The direct cause of this event was considered to be sparks generated by an abrasive wheel cutter, some of which reached the pre-filter and eventually burned the pre-filter. Further investigation revealed that there exist other deficiencies those of which formed indirect causes of the event, such as the wheel cutter was used without protective cover and adequate shield against sparks was not installed during the operation. To prevent similar event in the future, following corrective actions were introduced. Wheel cutter will not be used without protective cover; Incombustible pre-filter will be used; Shield will be place at the front of the pre-filter. We have conducted series of experimental tests in order to evaluate and confirm the validity of these corrective actions as well as determine the cause of the fire. This report present the results of these tests.

Journal Articles

Development of Foam Floating Decontamination System for Radioactive Solid Wastes from MOX-Fuel Fabrication

Okada, Takashi; Uematsu, Shinichi; Tobita, Noriyuki; Kato, Junya

9th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM '03), 0 Pages, 2003/00

None

Journal Articles

The Development of the advanced temperature control device for the irradiation capsule

Kitajima, Toshio; Abe, Shinichi; Takahashi, Kiyoshi; Onuma, Yuichi; Watanabe, Hiroyuki; Okada, Yuji; Oyake, Noriyuki*

UTNL-R-0404, p.6_1 - 6_9, 2001/00

no abstracts in English

Oral presentation

Development of broadband mixed Nd doped laser ceramics

Okada, Hajime; Kiriyama, Hiromitsu; Tanaka, Momoko; Ochi, Yoshihiro; Nakai, Yoshiki; Sugiyama, Akira; Daido, Hiroyuki; Yanagitani, Takagimi*; Yagi, Hideki*; Meichin, Noriyuki*

no journal, , 

We have developed and demonstrated broadband Nd-doped mixed scandium garnets produced using laser ceramic technology.

22 (Records 1-20 displayed on this page)