Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

Examinations of performance for utilization of radiation portal monitors in contamination inspection for motor vehicles in nuclear emergency (Contract research)

Hiraoka, Hirokazu; Komatsuzaki, Joji*; Hanaka, Norihiko*; Okamoto, Akiko; Saito, Yoshihiko*; Munakata, Masahiro; Togawa, Orihiko

JAEA-Technology 2022-003, 70 Pages, 2022/07

JAEA-Technology-2022-003.pdf:2.53MB

In contamination inspections for public in nuclear emergency, it is assumed that a large number of motor vehicles and evacuees will be inspected. At present, first measurement points of vehicles are tires and around a wiper, and they are basically inspected by persons using portable radiation surface contamination meters such as GM survey meters. However, in order to efficiently inspect contamination of vehicles, utilization of portable radiation portal monitors is being considered for the inspection. In this study, examination of performance of the portal monitor was conducted in order to obtain basic data. In this examinations, sealed radiation sources, Ba, were substituted for the contamination of Operational Intervention Level 4 (OIL4), the evaluation criteria to conduct simple decontamination in the contamination inspection. The radiation source was attached practically to a tire and around the wipers of a vehicle, and the counting rate of -rays from the radiation sources was measured using the portal monitor. Three examinations were conducted: static examination with a vehicle stationary, moving examination to mock the actual inspection, and high back ground examination to investigate performance of the equipment in high back ground environment. The vehicle mainly used in the experiments was a sedan, which is generally used as standard vehicles. And, a van whose front body is like that of a bus was used at this experiment. In addition, the "Gamma Pole" manufactured by the Chiyoda Technol Corporation was used as the portal monitor. As the result, it was estimated that the case of contamination equivalent to 40,000 cpm, the default value of the OIL4, deposited on the tread on a vehicle tire, when the vehicle passes through the portal monitor at 10 km/h or less, the contamination would be detected with a probability of 99% or more. Similarly, when the contamination deposited on around the wipers and the vehicle speed is 5 km/h or less,

Magnetoelastic anisotropy in Heusler-type MnCoGa films

Kubota, Takahide*; Takano, Daichi*; Kota, Yohei*; Mohanty, S.*; Ito, Keita*; Matsuki, Mitsuhiro*; Hayashida, Masahiro*; Sun, M.*; Takeda, Yukiharu; Saito, Yuji; et al.

Physical Review Materials (Internet), 6(4), p.044405_1 - 044405_12, 2022/04

https://doi.org/10.1103/PhysRevMaterials.6.044405

Manufacture of substitutive assemblies for MONJU reactor decommissioning

Sakakibara, Hiroshi; Aoki, Nobuhiro; Muto, Masahiro; Otabe, Jun; Takahashi, Kenji*; Fujita, Naoyuki*; Hiyama, Kazuhiko*; Suzuki, Hirokazu*; Kamogawa, Toshiyuki*; Yokosuka, Toru*; et al.

JAEA-Technology 2020-020, 73 Pages, 2021/03

JAEA-Technology-2020-020.pdf:8.26MB

The decommissioning is currently in progress at the prototype fast breeder reactor Monju. Fuel assemblies will be taken out of its core for the first step of the great task. Fuel assemblies stand on their own spike plugged into a socket on the core support plate and support with adjacent assemblies through their housing pads each other, resulting in steady core structure. For this reason, some substitutive assemblies are necessary for the purpose of discharging the fuel assemblies of the core. Monju side commissioned, therefore, Plutonium Fuel Development Center to manufacture the substitutive assemblies and the Center accepted it. This report gives descriptions of design, manufacture, and shipment in regard to the substitutive assemblies.

Enhancement of element production by incomplete fusion reaction with weakly bound deuteron

Wang, H.*; Otsu, Hideaki*; Chiga, Nobuyuki*; Kawase, Shoichiro*; Takeuchi, Satoshi*; Sumikama, Toshiyuki*; Koyama, Shumpei*; Sakurai, Hiroyoshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; et al.

Communications Physics (Internet), 2(1), p.78_1 - 78_6, 2019/07

https://doi.org/10.1038/s42005-019-0165-1

Searching for effective pathways for the production of proton- and neutron-rich isotopes through an optimal combination of reaction mechanism and energy is one of the main driving forces behind experimental and theoretical nuclear reaction studies as well as for practical applications in nuclear transmutation of radioactive waste. We report on a study on incomplete fusion induced by deuteron, which contains one proton and one neutron with a weak binding energy and is easily broken up. This reaction study was achieved by measuring directly the cross sections for both proton and deuteron for Pd at 50 MeV/u via inverse kinematics technique. The results provide direct experimental evidence for the onset of a cross-section enhancement at high energy, indicating the potential of incomplete fusion induced by loosely-bound nuclei for creating proton-rich isotopes and nuclear transmutation of radioactive waste.

Studies of high density baryon matter with high intensity heavy-ion beams at J-PARC

Sako, Hiroyuki; Harada, Hiroyuki; Sakaguchi, Takao*; Chujo, Tatsuya*; Esumi, Shinichi*; Gunji, Taku*; Hasegawa, Shoichi; Hwang, S.; Ichikawa, Yudai; Imai, Kenichi; et al.

Nuclear Physics A, 956, p.850 - 853, 2016/12

https://doi.org/10.1016/j.nuclphysa.2016.03.030

Crack growth behavior of F82H steel in the 288C water

Ito, Yuzuru; Saito, Masahiro*; Abe, Katsunori*; Wakai, Eiichi

Journal of Plasma and Fusion Research SERIES, Vol.11, p.73 - 78, 2015/03

http://www.jspf.or.jp/JPFRS/PDF/Vol11/jpfrs2015_11-073.pdf

Crack growth is a one of the key mechanical properties for the design evaluation in fusion materials to be tested at the High Flux Test Module (HFTM) in IFMIF. In this study, crack growth rate of the F82H steel in the 288C water was investigated by using an almost standard size specimen in order to avoid the specimen size effect on the crack growth. It was found that the typical intergranular fracture surface could be obtained during the crack propagation even at room temperature. Chromium carbide, CrC, precipitation along the grain boundaries in F82H steel may influence the intergranular fracture under the fatigue crack propagation at room temperature in air. The possible evidence of crack growth in the 288C water was also observed. The crack growth rate at 30 MPa in the 288C water was conservatively estimated to about 710 m/s. Further systematic study of crack growth, and the improvement of surface finishing against crack propagation are necessary for the design evaluation in fusion materials.

Characteristics and verification of a car-borne survey system for dose rates in air; KURAMA-II

Tsuda, Shuichi; Yoshida, Tadayoshi; Tsutsumi, Masahiro; Saito, Kimiaki

Journal of Environmental Radioactivity, 139, p.260 - 265, 2015/01

https://doi.org/10.1016/j.jenvrad.2014.02.028

The car-borne survey system, KURAMA-II, developed by the Kyoto University Research Reactor Institute has been used for air dose rate mapping after the Fukushima Daiichi Nuclear Power Plant accident. The KURAMA-II consists of a CsI(Tl) scintillation detector, a GPS device, and a control device for data processing. The dose rates monitored by the KURAMA-II are based on the G(E) function (spectrum-dose conversion operator), which can precisely calculate dose rate from the measured pulse-height distribution even if the energy spectrum changes significantly. The characteristics of the KURAMA-II have been investigated with particular consideration to the reliability of the calculated G(E) function, dose rate dependence, statistical fluctuation, angular dependence, and energy dependence. The results indicate that 100 units of KURAMA-II systems have acceptable quality for mass monitoring dose rates in the environment.

Nuclear resonant scattering measurements on Fe by multichannel scaling with a 64 pixel silicon avalanche photodiode linear-array detector

Kishimoto, Shunji*; Mitsui, Takaya; Haruki, Rie*; Yoda, Yoshitaka*; Taniguchi, Takashi*; Shimazaki, Shoichi*; Ikeno, Masahiro*; Saito, Masatoshi*; Tanaka, Manobu*

Review of Scientific Instruments, 85(11), p.113102_1 - 113102_5, 2014/11

https://doi.org/10.1063/1.4900862

Establishment of production process of JK2LB jacket section for ITER CS

Ozeki, Hidemasa; Hamada, Kazuya; Takahashi, Yoshikazu; Nunoya, Yoshihiko; Kawano, Katsumi; Oshikiri, Masayuki; Saito, Toru; Teshima, Osamu*; Matsunami, Masahiro*

IEEE Transactions on Applied Superconductivity, 24(3), p.4800604_1 - 4800604_4, 2014/06

https://doi.org/10.1109/TASC.2013.2281536