Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sans-Planell, O.*; 篠原 武尚; Grazzi, F.*; Cantini, F.*; Su, Y. H.; 松本 吉弘*; Parker, J. D.*; Manke, I.*
Review of Scientific Instruments, 95(11), p.113702_1 - 113702_5, 2024/11
被引用回数：0 パーセンタイル：0.00(Instruments & Instrumentation)This study presents a significant development in the Energy-Resolved Neutron Imaging System RADEN, in the Japan Proton Accelerator Research Complex, Japan. Through a systematic study, the collimation power of the facility was reevaluated. To perform the calculation of the L/D factor of the beam, a state-of-the-art method has been used, along with a standard reference sample to measure the resolution of neutron images. To add robustness to the results, the study compares five different scintillators of different composition and thickness.
渡辺 賢一*; 須貝 優介*; 長谷川 創大*; 田中 清志朗*; 人見 啓太朗*; 野上 光博*; 篠原 武尚; Su, Y. H.; Parker, J. D.*; Kockelmann, W.*
Scientific Reports (Internet), 14, p.25224_1 - 25224_13, 2024/10
被引用回数：0 パーセンタイル：0.00(Multidisciplinary Sciences)Thallium bromide (TlBr) semiconductor detectors are being developed as promising candidates for high-detection-efficiency, high-energy-resolution, and room-temperature gamma-ray spectrometers. This study presents methods for evaluating TlBr crystal quality and carrier transport characteristics using neutron Bragg-dip imaging and the time-of-flight method for pulsed-laser-induced carriers, respectively. In this study, two samples obtained from both the upstream and downstream region in the crystal ingot were evaluated.
Wang, Y.*; Gong, W.; Su, Y. H.; Li, B.*
Acta Metallurgica Sinica, 60(8), p.1001 - 1016, 2024/08
被引用回数：0 パーセンタイル：0.00(Metallurgy & Metallurgical Engineering)The correlation between the atomic structure, microstructure, and macroscopic properties of structural materials remains a core issue in materials research. In recent years, substantial progress has been achieved in constructing accelerator-based neutron sources and related experimental techniques, offering a robust platform for an in-depth understanding of the aforementioned correlation under real-time and in situ conditions. This article reviews the latest advancements in the application of major neutron characterization techniques, including neutron diffraction, Bragg-edge imaging, small-angle neutron scattering, pair distribution function analysis, and quasi-elastic/inelastic neutron scattering, in structural materials. Furthermore, it particularly highlights the origins and evolution of internal stresses during the phase transformations of steels, deformation mechanisms in light metals such as magnesium alloys, and microstructure and residual stress analyses using Bragg-edge imaging. Finally, a brief outlook on future development trends is provided.
Hu, F. F.*; Qin, T. Y.*; Ao, N.*; Su, Y. H.; Zhou, L.*; 徐 平光; Parker, J. D.*; 篠原 武尚; Chen, J.*; Wu, S. C.*
Engineering Fracture Mechanics, 306, p.110267_1 - 110267_18, 2024/08
被引用回数：2 パーセンタイル：51.41(Mechanics)Non-destructive and quantitative mapping of gradient residual strain distribution in surface-hardened railway S38C axles could provide a positive reference for determining service lifetime and maintenance strategy. To tackle this concern, time-of-flight neutron Bragg-edge transmission imaging was employed by real axle samples with and without impacted crater. A novel and simple procedure to formulate the residual strain field was also developed in this work, with the transmission batch code in Appendix A. By mapping the global two- dimensional residual strains, it can be verified that the residual strains into the axle are uniformly distributed in the hoop direction. Subsequently, it was revealed that the axial and hoop residual strains, respectively in the cylinder and the long strip samples prepared from a real S38C hollow axle, indicated a gradient evolution distribution with a depth of 
8 mm, covering a range of -5500 1000 
for axial strains and -6500 1000 for hoop strains. More importantly, the maximum compressive lattice strain of the cylinder sample was increased by 15.61%, and 22.35% at the impacting speeds of 100, and 125 m/s, respectively; and that of the long strip sample increased by 29.17%, and 43.70%, respectively. It can thus be concluded that lattice strains have redistributed around the impact crater, demonstrating the local alteration of the residual strain field. These new findings suggest the localized variation in residual strains should be taken into account while evaluating the service damage evolution of railway axles, especially those affected by high-speed impacts during operation.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, H.*; Zhou, L.*; Ao, N.*; Su, Y. H.; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 185, p.108336_1 - 108336_13, 2024/08
被引用回数：8 パーセンタイル：92.28(Engineering, Mechanical)Gradient distribution of triaxial residual stresses to a depth of several millimeters is retained in middle carbon steel S38C axles after high-frequency induction hardening, which has become a critical concern for fatigue structural integrity. To address this, the axial, hoop, and radial gradient residual strains inside the axles were measured for the first time by advanced neutron diffraction. The SIGINI Fortran subroutine was then adopted to reconstruct the global initial residual stress field from the measured data. Experimental and simulation results show that residual stresses of about -520 MPa (axial), -710 MPa (hoop), and -40 MPa (radial) residual stress were retained below the axle surface. Subsequently, the fatigue crack propagation behavior of S38C axles was numerically investigated in the framework of fracture mechanics. The calculated results clearly show that the compressive residual stresses at a depth of 0?3 mm from the axle surface lead to a low crack growth driving force, and that fatigue cracks do not propagate as long as the crack depth is less than 3.7 mm for hollow S38C axles. These results further indicate that the maximum defect size allowed in routine inspections is acceptable from a safety and economic point of view. Accurate measurement and characterization of the global gradient residual stress field through experiments and simulations can provide an important reference for optimizing the mileage intervals of nondestructive testing (NDT) of surface defects in these surface-strengthened railway axles.
Wang, Y. W.*; 徐 平光; Su, Y. H.; Ma, Y. L.*; Wang, H. H.*
Physics Examination and Testing, 42(4), p.32 - 41, 2024/08
With the rapid technological development of large spallation neutron source facilities, the neutron beam flux obtained has been greatly improved and neutron imaging techniques have been further developed. Due to the limitation of neutron beam flux, conventional neutron imaging techniques require neutron beams with a wide wavelength range to obtain relatively high neutron beam flux conditions. Recently, spallation neutron sources using large proton accelerators have made it possible to obtain high-flux pulsed neutron beams. Energy (wavelength) resolved neutron imaging technique based on the Bragg edge effect (neutron Bragg edge transmission imaging technique) is expected to have a wide range of applications because of its high energy resolution, high spatial resolution, and ability to detect crystallographic information. The basic principle of this technique is briefly introduced. Several applications in the evaluation of residual strain, phase composition, dislocation density, and oriented structure are also reviewed to play an active role in promoting the wider applications of related technique.
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 55(7), p.2175 - 2185, 2024/07
被引用回数：3 パーセンタイル：82.75(Materials Science, Multidisciplinary)High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; G
mez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数：1 パーセンタイル：68.69(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核
Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態のArの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる
Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
渡辺 賢一*; 須貝 優介*; 長谷川 創大*; 人見 啓太朗*; 野上 光博*; 篠原 武尚; Su, Y. H.; Parker, J. D.*; Kockelmann, W.*
Sensors and Materials, 36(1), p.149 - 154, 2024/01
被引用回数：2 パーセンタイル：76.72(Instruments & Instrumentation)Thallium bromide (TlBr) semiconductor detectors are promising candidates for high-detection-efficiency, high-energy-resolution, and room-temperature gamma-ray spectrometers. In this study, we conducted neutron Bragg dip and electron backscatter diffraction (EBSD) imaging of TlBr crystals to measure the crystal orientation distribution. We confirmed that crystal grains were continuous over a certain distance along the solidification direction for samples fabricated with the current growth procedure.
Wang, Y. W.*; Wang, H. H.*; Su, Y. H.; 徐 平光; 篠原 武尚
Materials Science & Engineering A, 887, p.145768_1 - 145768_13, 2023/11
被引用回数：6 パーセンタイル：59.93(Nanoscience & Nanotechnology)A unique impact fracture behavior is found in a high-Mn austenitic steel (24Mn-4Cr-0.4C-0.3Cu) in this work. The steel exhibits concurrent twinning-induced plasticity (TWIP) effect and the transformation-induced plasticity (TRIP) effect. By analyzing the load-deflection curves recorded during Charpy impact testing, the resistance to crack initiation and propagation is quantified from the absorbed energy. The high-Mn steel demonstrates good resistance to crack initiation at 273 K and 77 K. However, as the temperature decreases from 273 K to 77 K, there is an accelerated transition from stable crack growth to unstable crack growth during impact, resulting in the deterioration of resistance to crack propagation. The plastic deformation of the impact-tested samples, especially in the region close to the crack-path profile was quantitatively analyzed using neutron Bragg-edge transmission (BET) imaging. The deformation zones, divided by using the width of the 200 Bragg edge, exhibit good agreement with the impact absorbed energy characteristics obtained from dynamic load-deflection curves. Moreover, the unstable growth transition point was roughly determined on the impact-tested sample. Then, the electron backscatter diffraction (EBSD) technique is employed to examine the deformation microstructure along the crack-path in the impact-tested samples. The results revealed the dual roles of TRIP effect in impact toughness of the high-Mn steel. On one hand, the TRIP effect plays a positive role in improving resistance to crack initiation and propagation. On the other hand, the excessive accumulation of brittle /
'-martensite caused by the enhanced TRIP effect at 77 K leads to quasi-cleavage fracture, thereby playing a negative role. Finally, we discussed the prominent toughening mechanisms associated with the TWIP and TRIP effects, which greatly impact the impact fracture behavior.
and 
Xi, H.-Z.*; Jiang, Y.-W.*; Chen, H.-X.*; 保坂 淳; Su, N.*
Physical Review D, 108(9), p.094019_1 - 094019_13, 2023/11
被引用回数：4 パーセンタイル：55.83(Astronomy & Astrophysics)との量子数をもつ、ストレンジクォークのみからなるテトラクォークを理論的に調べた結果を報告する。前者および後者の質量はそれぞれ2.47GeV、3.07GeVであるなど、いくつかの予言値を得た。
Be ground-state molecular structure using Be(
)
He triple differential reaction cross-section measurementsLi, P. J.*; Beaumel, D.*; Lee, J.*; Assi
, M.*; Chen, S.*; Franchoo, S.*; Gibelin, J.*; Hammache, F.*; Harada, T.*; 延与 佳子*; et al.
Physical Review Letters, 131(21), p.212501_1 - 212501_7, 2023/11
被引用回数：14 パーセンタイル：91.25(Physics, Multidisciplinary)Beのクラスター構造を()反応を用いて調査した。三重微分断面積が実験的に測定され、Tohsaki-Horiuchi-Schuck-R
pke波動関数の方法や反対称化分子動力学を用いた歪曲波インパルス近似計算と比較した。実験データと理論計算の顕著な一致が確認され、Beの比較的コンパクトな分子状態を確認した。
及川 健一; 佐藤 博隆*; 渡辺 賢一*; Su, Y. H.; 篠原 武尚; 甲斐 哲也; 鬼柳 善明*; 長谷美 宏幸
Journal of Physics; Conference Series, 2605, p.012013_1 - 012013_6, 2023/10
Spectral data of Bragg-edge imaging, which is one of the energy-resolved neutron imaging methods, can be analyzed by single-edge analysis and full-pattern analysis with the Bragg-edge analysis code RITS developed by Sato et al. This program has a function to generate neutron transmission data considering wavelength-dependent pulse-shape function, atomic number density, crystalline structure, etc., and to extract these parameters from the measured data by the nonlinear least-squares fitting. Last year, we worked on updating the operating environment of the platform Scientific Linux 6 and the language Python 2, which have been discontinued, to Windows 10 and Python 3, and added some functions to improve usability. GUI-RITS for the windows platform has been released to users. In this presentation, we will show concrete examples of the results of the analysis of the same data by the old and new programs, and compare the efficiency of data analysis.
Su, Y. H.; 及川 健一; 篠原 武尚; 甲斐 哲也; 堀野 孝*; 井戸原 修*; 三阪 佳孝*; 友田 陽*
International Journal of Fatigue, 174, p.107729_1 - 107729_12, 2023/09
被引用回数：12 パーセンタイル：87.42(Engineering, Mechanical)A novel procedure, double induction quenching (DIQ), effective for improving the fatigue strength of gear products, has been used for producing gears with steep gradients of compressive residual stress generated in the tooth surface. We performed a Bragg edge imaging experiment at a pulsed neutron source to determine the spatial distribution of the {110} lattice spacing (d
) and the broadening of the {110} Bragg edge (w) on the DIQ gear product after tooth-bending fatigue tests to which different loading cycles were applied. No significant difference occurred in the d and the wat Hofer 's critical section of the teeth with different loading conditions within the accuracy of data analysis. However, we detected a decrease in the w and changes in the residual lattice strain distribution in the axial direction along the tooth root directions at the opposite side of Hofer 's critical section for both teeth after 3
10 
and 810 cycles, relieving the compressive residual stresses during the fatigue process. The residual stress close to the gear tooth surface determined by X-ray diffraction using sequential polishing showed a slight relaxation and redistribution from the tensile side in the hoop direction, complementary to the neutron Bragg edge imaging.
Ca cast doubt on a doubly magic 
CaChen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.
Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08
被引用回数：6 パーセンタイル：84.52(Astronomy & Astrophysics)
Scからの1陽子ノックアウト反応を用いて、
Caと
Caのガンマ崩壊を観測した。Caでは1456(12)keVの
線遷移が、Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的に
と割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、
準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素である
と
軌道はほぼ縮退しており、これはCaが二重魔法核である可能性を排除し、Ca同位体のドリップラインを
Caあるいはそれ以上にまで広げる可能性がある。
100 MeV/nucleonPohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; Gmez-Ramos, M.*; 緒方 一介*; 吉田 数貴; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.
Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04
被引用回数：11 パーセンタイル：88.84(Physics, Multidisciplinary)大きなフェルミ面非対称性を持つ陽子過剰な
O原子核からの100MeV/nucleonでの陽子による陽子・中性子除去反応について報告した。この結果は、quasi-freeノックアウト反応、非弾性散乱、核子移行反応を含む複数の反応機構の定量的寄与を初めて示すものである。このようなエネルギー領域では通常無視される非弾性散乱と核子移行の寄与が、弱束縛陽子と強束縛中性子の除去反応断面積にそれぞれ約50%と30%寄与していることが示された。
Ao, N.*; Zhang, H.*; Xu, H. H.*; Wu, S. C.*; Liu, D.*; 徐 平光; Su, Y. H.; Kang, Q. H.*; Kang, G. Z.*
Engineering Fracture Mechanics, 281, p.109166_1 - 109166_14, 2023/03
被引用回数：12 パーセンタイル：87.00(Mechanics)Considering the complex service environments that high-speed railway axles are subjected to, the fatigue crack growth (FCG) behavior of a structurally gradient axle steel with different pre-crack depths both in air and corrosive medium was investigated at a frequency of 5 Hz. The results indicated that in the high 
region, FCG rate was dramatically accelerated by corrosion, but the gap narrows as decreased. The accelerated corrosion FCG rate was a comprehensive result of the acceleration effect of the anodic dissolution, hydrogen-enhanced localized plasticity and the retardation effect of corrosion-induced crack-tip blunting. Despite the fact that the corrosion resistance gradually decreased as the pre-crack depth increased, the FCG rate in the corrosive medium gradually decreased. This was because fatigue loading played a more important role than corrosion in accelerating the corrosion FCG rate.
Zhang, H.*; Wu, S. C.*; Ao, N.*; Zhang, J. W.*; Li, H.*; Zhou, L.*; 徐 平光; Su, Y. H.
International Journal of Fatigue, 166, p.107296_1 - 107296_11, 2023/01
被引用回数：17 パーセンタイル：82.36(Engineering, Mechanical)Abnormal damages in railway axles can lead to a significant hazard to running safety and reliability. To this end, a surface treatment was selected to effectively inhibit fatigue crack initiation and growth. In this study, a single edge notch bending fatigue test campaign with artificial notches was conducted to elucidate the fatigue crack non-propagation behavior in railway S38C axles subjected to an induction hardening process. The fatigue cracking behavior in the gradient structure was revealed by optical microscopy, electron backscatter diffraction, and fractography. The microhardness distribution was measured using a Vickers tester. The obtained results show that the microhardness of the strengthening layer is nearly triple that of the matrix. Owing to the gradient microstructures and hardness, as well as compressive residual stress, the fatigue long crack propagates faster once it passes through the hardened zone (approximately 2.0 mm in the radial depth). Thereafter, local retarding (including deflection, branching, and blunting) of the long crack occurs because of the relatively coarse ferrite and pearlite in the transition region and matrix. Totally, this fatigue cracking resistance is reasonably believed to be due to the gradient microstructure and residual stress. These findings help to tailor a suitable detection strategy for maximum defects or cracks in railway axles.
island of inversion; First study of low-lying bound excited states in 
V and 
VElekes, Z.*; Juh
sz, M. M.*; Sohler, D.*; Sieja, K.*; 吉田 数貴; 緒方 一介*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; 馬場 秀忠*; et al.
Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12
被引用回数：2 パーセンタイル：34.70(Physics, Nuclear)VとVの低励起準位構造を初めて探索した。Vについては中性子ノックアウト反応と陽子非弾性散乱が、Vについては中性子ノックアウト反応データが得られた。Vについては4つ、Vについては5つの新たな遷移が確認された。Lenzi-Nowacki-Poves-Sieja (LNPS)相互作用に基づく殻模型計算との比較によって、それぞれの同位体について確認されたガンマ線のうち3つが、first 11/2
状態とfirst 9/2状態からの崩壊と決定された。Vについては、(
,
)非弾性散乱断面積は四重極変形と十六重極変形を想定したチャネル結合法により解析されたが、十六重極変形の影響により、明確に反転の島に属するとは決定できなかった。
neutron orbital and the 
shell closure in CaEnciu, M.*; Liu, H. N.*; Obertelli, A.*; Doornenbal, P.*; Nowacki, F.*; 緒方 一介*; Poves, A.*; 吉田 数貴; Achouri, N. L.*; 馬場 秀忠*; et al.
Physical Review Letters, 129(26), p.262501_1 - 262501_7, 2022/12
被引用回数：14 パーセンタイル：84.80(Physics, Multidisciplinary)230MeV/nucleonでのCaからの中性子ノックアウト反応が線分光と行われ、
と
軌道からの中性子ノックアウト反応の運動量分布が測定された。断面積はの閉殻と整合し、Ca同位体での
と
閉殻と同程度に強い閉殻であることが確認された。運動量分布の分析から
と軌道の平均二乗根半径の差は0.61(23)fmと決定され、これはmodified-shell-modelによる予言の0.7fmと整合した。これは、中性子過剰なCa同位体での軌道半径が大きいことが、中性子数にしたがって線形的に荷電半径が増える意外な現象の原因であることを示唆している。
