Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
沖田 将一朗; 青木 健; 深谷 裕司; 橘 幸男
Proceedings of 31st International Conference on Nuclear Engineering (ICONE31) (Internet), 5 Pages, 2024/11
We have been developing a methodology for nuclide production and annihilation and decay heat evaluations for High Temperature Gas-cooled Reactors (HTGRs). We are planning to perform validation of the evaluation method with isotopic composition data obtained from HTGR type fuel irradiation tests (AGR tests) performed at the Idaho National Laboratory. As a first step of this plan, preliminary validation of a calculation code and a nuclear data library to be used in the evaluation methodology should be conducted. We made a calculation model of the Advanced Test Reactor (ATR) with a continuous-energy Monte Carlo code MVP-3 and the latest nuclear data library in Japan JENDL-5 on the basis of a calculation input for another Monte Carlo code MCNP5 documented in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhE). We also calculated effective multiplication factors and relative power densities for the ATR calculation model. As a result of comparison with measured values reported in the IRPhE handbook, the JENDL-5 and the calculation model built with MVP-3 shows an enough calculation accuracy in the ATR. Our results will help us to perform our planned validation of our nuclide production and annihilation and decay heat evaluation methodology with the AGR test data.
Yan, X.; 佐藤 博之; 角田 淳弥; 野本 恭信*; 堀井 翔一*; 今井 良行; 笠原 清司; 鈴木 孝一*; 岩月 仁; 寺田 敦彦; et al.
Nuclear Engineering and Design, 329, p.223 - 233, 2018/04
被引用回数:27 パーセンタイル:91.93(Nuclear Science & Technology)原子力機構では、高温ガス炉から取り出される熱を用いた発電や水素製造等の実現に向けて、ヘリウムガスタービン及び水素製造施設の原子炉への接続にあたっての安全基準確立や経済的で信頼性を有する運転制御方式の確立を目的とした、HTTRに熱利用施設を接続したHTTR-GT/Hプラントの建設を計画している。本報告では、HTTR-GT/H
プラントの基本設計として、システム設計の成果を報告する。
中谷 泰博*; 荒谷 秀和*; 藤原 秀紀*; 森 健雄*; 鶴田 篤史*; 橘 祥一*; 山口 貴司*; 木須 孝幸*; 山崎 篤志*; 保井 晃*; et al.
Physical Review B, 97(11), p.115160_1 - 115160_7, 2018/03
被引用回数:5 パーセンタイル:22.43(Materials Science, Multidisciplinary)We present clear experimental evidence for the momentum-dependent heavy fermionic electronic structures of the 4-based strongly correlated system CeNi
Ge
by soft X-ray angle-resolved photoemission spectroscopy. A comparison between the experimental three-dimensional quasiparticle dispersion of LaNi
Ge
and CeNi
Ge
has revealed that heavy fermionic electronic structures are seen in the region surrounding at a specific momentum. Furthermore, the wave vectors between the observed "heavy spots" are consistent with a result of neutron scattering reflecting magnetic correlations, which could be a trigger of the superconductivity in CeNi
Ge
.
中谷 泰博*; 藤原 秀紀*; 荒谷 秀和*; 森 健雄*; 橘 祥一*; 山口 貴司*; 木須 孝幸*; 山崎 篤志*; 保井 晃*; 山上 浩志*; et al.
Journal of Electron Spectroscopy and Related Phenomena, 220, p.50 - 53, 2017/01
被引用回数:2 パーセンタイル:15.41(Spectroscopy)重い電子化合物CeNiGe
の非4
バンド由来の電子構造を明らかにするため、LaNi
Ge
の軟X線角度分解光電子分光を行った。La M
吸収端での光電子スペクトルで、価電子帯のLa 5
成分の明瞭な強度の増大が観測された。さらに、軌道対称性に起因するバンドに依存した円二色性が観測された。
山崎 篤志*; 藤原 秀紀*; 橘 祥一*; 岩崎 大昌*; 東野 勇志*; 吉見 千秋*; 中川 広野*; 中谷 泰博*; 山神 光平*; 荒谷 秀和*; et al.
Physical Review B, 94(11), p.115103_1 - 115103_10, 2016/11
被引用回数:18 パーセンタイル:57.73(Materials Science, Multidisciplinary)軟X線角度分解光電子分光を用いて、Ruddlesden-Popper型イリジウム酸化物SrIr
O
の3次元バンド構造を調べた。その結果、IrO
面構造の次元性の増加と共に発現する金属-絶縁体転移に関する直接的な証拠を得た。この転移は、スピンー軌道結合により生じた
= 1/2バンドがフェルミエネルギーを横切ることにより生じる。入射光エネルギーを350eV以上走査することにより、SrIrO
の3次元フェルミ面形状及び、Sr
Ir
O
の
依存した光電子強度の振動を明らかにした。本手法は、電子状態の全体像の理解において非常に有効である。
Yan, X.; 佐藤 博之; 角田 淳弥; 野本 恭信; 堀井 翔一; 今井 良行; 笠原 清司; 鈴木 孝一*; 岩月 仁; 寺田 敦彦; et al.
Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.827 - 836, 2016/11
原子力機構では、高温ガス炉から取り出される熱を用いた発電や水素製造等の実現に向けて、ヘリウムガスタービン及び水素製造施設の原子炉への接続にあたっての安全基準確立や経済的で信頼性を有する運転制御方式の確立を目的とした、HTTRに熱利用施設を接続したHTTR-GT/Hプラントの建設を計画している。本報告では、HTTR-GT/H
プラントの基本設計として、システム設計の成果を報告する。
吉田 克己*; Gubarevich, A.*; 橘 幸男; 高松 邦吉; 沖田 将一朗; 西村 洋亮*; 岡本 孝司*
no journal, ,
High Temperature Gas-cooled Reactors (HTGRs) adopting silicon carbide (SiC) instead of conventional graphite for fuel compacts with TRISO fuel particles have been proposed to improve the power density and to enhance the oxidation resistance of the fuel elements in the air ingress accident. In this study, we selected reaction sintering method, which is capable of fabricating dense SiC at lower temperature in a short time without mechanical pressure, and the fabrication process of the dense SiC matrix fuel compacts by reaction sintering was studied, and characterization and thermal conductivity measurement of the reaction-sintered SiC were conducted.
高松 邦吉; 沖田 将一朗; 橘 幸男; 西村 洋亮*; 岡本 孝司*
no journal, ,
本研究では、SiC母材の燃料コンパクトを採用した高出力密度高温ガス炉の事故解析を行い、実機の成立性を評価した。具体的には、高温ガス炉の安全評価で用いた2次元非定常伝熱解析コードを用いて減圧事故解析を行った結果、高出力密度高温ガス炉の燃料温度分布及びRPV温度分布等が明らかとなり、燃料最高温度は1400Cを超えないことを確認できた。つまり、減圧事故が発生しても、SiC母材の燃料コンパクトを採用した高出力密度高温ガス炉は、優れた受動的安全性の特徴を持つことがわかった。