検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 219 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Enhancing mechanical properties of medium Mn steel by warm rolling based on laminated elemental segregation

Chen, H. F.*; Liu, B. X.*; 徐 平光; Fang, W.*; Tong, H. C.*; Yin, F. X.*

Journal of Materials Research and Technology, 32, p.3060 - 3069, 2024/09

 被引用回数:0 パーセンタイル:0.00(Materials Science, Multidisciplinary)

The hot-rolled microstructure of medium Mn steel has coarse grains and severe elemental segregation, resulting in low strength and plasticity. Constructing a multiphase structure, refining the microstructure, and regulating elemental segregation enhance the mechanical properties. In this study, liquid nitrogen treatment created a layered distribution of austenite and martensite. Warm rolling was then used to reduce layer thickness and refine grain structure. After liquid nitrogen and warm rolling treatments, the strength and plasticity of medium Mn steel increased to 1270 MPa and 23.3%, respectively, far exceeding the hot-rolled state (724 MPa, 12.8%). Warm rolling also triggers austenite reverted transformation (ART) and introduces high-density dislocations, further improving austenite stability. This strengthening effect is higher than that from intercritical annealing alone. Improved austenite stability delays the transformation induced plasticity (TRIP) effect, preventing brittle fracture and enhancing deformation coordination between layers, significantly increasing the plastic deformation capacity of medium Mn steel.

論文

Gradient residual strain determination of surface impacted railway S38C axles by neutron Bragg-edge transmission imaging

Hu, F. F.*; Qin, T. Y.*; Ao, N.*; Su, Y. H.; Zhou, L.*; 徐 平光; Parker, J. D.*; 篠原 武尚; Chen, J.*; Wu, S. C.*

Engineering Fracture Mechanics, 306, p.110267_1 - 110267_18, 2024/08

 被引用回数:1 パーセンタイル:0.00(Mechanics)

Non-destructive and quantitative mapping of gradient residual strain distribution in surface-hardened railway S38C axles could provide a positive reference for determining service lifetime and maintenance strategy. To tackle this concern, time-of-flight neutron Bragg-edge transmission imaging was employed by real axle samples with and without impacted crater. A novel and simple procedure to formulate the residual strain field was also developed in this work, with the transmission batch code in Appendix A. By mapping the global two- dimensional residual strains, it can be verified that the residual strains into the axle are uniformly distributed in the hoop direction. Subsequently, it was revealed that the axial and hoop residual strains, respectively in the cylinder and the long strip samples prepared from a real S38C hollow axle, indicated a gradient evolution distribution with a depth of $$sim$$ 8 mm, covering a range of -5500 $$sim$$ 1000 $$mu$$$$varepsilon$$ for axial strains and -6500 $$sim$$ 1000 $$mu$$$$varepsilon$$ for hoop strains. More importantly, the maximum compressive lattice strain of the cylinder sample was increased by 15.61%, and 22.35% at the impacting speeds of 100, and 125 m/s, respectively; and that of the long strip sample increased by 29.17%, and 43.70%, respectively. It can thus be concluded that lattice strains have redistributed around the impact crater, demonstrating the local alteration of the residual strain field. These new findings suggest the localized variation in residual strains should be taken into account while evaluating the service damage evolution of railway axles, especially those affected by high-speed impacts during operation.

論文

Gradient residual stress and fatigue life prediction of induction hardened carbon steel S38C axles; Experiment and simulation

Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, H.*; Zhou, L.*; Ao, N.*; Su, Y. H.; 菖蒲 敬久; Wu, S. C.*

International Journal of Fatigue, 185, p.108336_1 - 108336_13, 2024/08

 被引用回数:5 パーセンタイル:93.69(Engineering, Mechanical)

Gradient distribution of triaxial residual stresses to a depth of several millimeters is retained in middle carbon steel S38C axles after high-frequency induction hardening, which has become a critical concern for fatigue structural integrity. To address this, the axial, hoop, and radial gradient residual strains inside the axles were measured for the first time by advanced neutron diffraction. The SIGINI Fortran subroutine was then adopted to reconstruct the global initial residual stress field from the measured data. Experimental and simulation results show that residual stresses of about -520 MPa (axial), -710 MPa (hoop), and -40 MPa (radial) residual stress were retained below the axle surface. Subsequently, the fatigue crack propagation behavior of S38C axles was numerically investigated in the framework of fracture mechanics. The calculated results clearly show that the compressive residual stresses at a depth of 0?3 mm from the axle surface lead to a low crack growth driving force, and that fatigue cracks do not propagate as long as the crack depth is less than 3.7 mm for hollow S38C axles. These results further indicate that the maximum defect size allowed in routine inspections is acceptable from a safety and economic point of view. Accurate measurement and characterization of the global gradient residual stress field through experiments and simulations can provide an important reference for optimizing the mileage intervals of nondestructive testing (NDT) of surface defects in these surface-strengthened railway axles.

論文

Progress of material characterization techniques based on neutron Bragg-edge transmission imaging

Wang, Y. W.*; 徐 平光; Su, Y. H.; Ma, Y. L.*; Wang, H. H.*

Physics Examination and Testing, 42(4), p.32 - 41, 2024/08

With the rapid technological development of large spallation neutron source facilities, the neutron beam flux obtained has been greatly improved and neutron imaging techniques have been further developed. Due to the limitation of neutron beam flux, conventional neutron imaging techniques require neutron beams with a wide wavelength range to obtain relatively high neutron beam flux conditions. Recently, spallation neutron sources using large proton accelerators have made it possible to obtain high-flux pulsed neutron beams. Energy (wavelength) resolved neutron imaging technique based on the Bragg edge effect (neutron Bragg edge transmission imaging technique) is expected to have a wide range of applications because of its high energy resolution, high spatial resolution, and ability to detect crystallographic information. The basic principle of this technique is briefly introduced. Several applications in the evaluation of residual strain, phase composition, dislocation density, and oriented structure are also reviewed to play an active role in promoting the wider applications of related technique.

論文

Influence of interstitial carbon on bulk texture evolution of carbide-free high-entropy alloys during cold rolling using neutron diffraction

Fang, W.*; Liu, C.*; Zhang, J.*; 徐 平光; Peng, T.*; Liu, B.*; 諸岡 聡; Yin, F.*

Scripta Materialia, 249, p.116046_1 - 116046_6, 2024/08

 被引用回数:2 パーセンタイル:63.56(Nanoscience & Nanotechnology)

The influence of interstitial carbon on the texture evolution of high-entropy alloys during cold rolling was investigated. To prevent carbide formation, elements with weak carbon affinity were carefully selected in the (FeMnCoNi)$$_{96.5}$$C$$_{3.5}$$ alloy. Neutron diffraction, electron channeling contrast imaging, and electron backscatter diffraction were used to analyze the texture and microstructure evolution in alloys with and without carbon addition. Though their texture components are similar at the early stage of deformation, the Brass and Goss textures in the carbon-containing alloy at 50% cold rolling reduction are obviously higher than those in the carbon-free alloy, while Copper and S textures are lower. A large number of deformation twins induced in the carbon containing alloy is attributed as the significant reason for the texture differences. This work helps to understand the impact of interstitial carbon on the texture evolution of high-entropy alloys, providing valuable insights for microstructure and performance optimization.

論文

Gradient residual strain measurement procedure in surface impacted railway steel axles by using neutron scattering

Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.

Metallurgical and Materials Transactions A, 55(7), p.2175 - 2185, 2024/07

 被引用回数:3 パーセンタイル:81.14(Materials Science, Multidisciplinary)

High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.

論文

New isomeric transition in $$^{36}$$Mg; Bridging the $$N = 20$$ and $$N = 28$$ islands of inversion

Madurga, M.*; Christie, J. M.*; Xu, Z.*; Grzywacz, R.*; Poves, A.*; King, T.*; Allmond, J. M.*; Chester, A.*; Cox, I.*; Farr, J.*; et al.

Physical Review C, 109(6), p.L061301_1 - L061301_6, 2024/06

 被引用回数:0 パーセンタイル:0.00(Physics, Nuclear)

ミシガン州立大学の国立超伝導サイクロトロン研究所にて$$^{48}$$Caからのフラグメンテーション反応によって中性子過剰核$$^{36}$$Mgを生成、分離し、そのアイソマーを探した。その結果、168keVのガンマ線を出して$$2^+$$に半減期約90nsで脱励起するアイソマーを発見した。その性質を議論するため、大規模殻模型計算の結果と比較した。Mg同位体では中性子数20から28領域にかけて広く変形核となることが知られているが、理論的には、前者の領域は$$sd$$殻から2個の中性子が励起することによって変形し、後者の領域は中性子数28の殻ギャップからの中性子励起によって変形する。$$^{36}$$Mgはその中間に位置し、両者の状態が近くに存在することで、励起エネルギーの低い$$0^+$$が出現すると理解される。

論文

Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation; An in situ diffraction study

Liss, K.-D.*; Han, J.-K.*; Blankenburg, M.*; Lienert, U.*; Harjo, S.; 川崎 卓郎; 徐 平光; 行武 栄太郎*; Kawasaki, M.*

Journal of Materials Science, 59(14), p.5831 - 5853, 2024/04

 被引用回数:2 パーセンタイル:77.00(Materials Science, Multidisciplinary)

The magnesium alloy AZ31, which has undergone high-pressure torsion processing, was subjected to in situ annealing micro-beam synchrotron high-energy X-ray diffraction and compared to the as-received rolled sheet material that was investigated through in situ neutron diffraction. While the latter only exhibits thermal expansion and minor recovery, the nanostructured specimen displays a complex evolution, including recovery, strong recrystallization, phase transformations, and various regimes of grain growth. Nanometer-scale grain sizes, determined using Williamson-Hall analysis, exhibit seamless growth, aligning with the transition to larger grains, as assessed through the occupancy of single grain reflections on the diffraction rings. The study uncovers strain anomalies resulting from thermal expansion, segregation of Al atoms, and the kinetics of vacancy creation and annihilation. Notably, a substantial number of excess vacancies were generated through high-pressure torsion, and maintained for driving the recrystallization and forming highly activated volumes for diffusion and phase precipitation during heating. The unsystematic scatter observed in the Williamson-Hall plot indicates high dislocation densities following severe plastic deformation, which significantly decreases during recrystallization. Subsequently, dislocations reappear during grain growth, likely in response to torque gradients in larger grains. It is worth noting that the characteristics of unsystematic scatter differ for dislocations created at high and low temperatures, underscoring the strong temperature dependence of slip system activation.

論文

Onset of collectivity for argon isotopes close to $$N=32$$

Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; G$'o$mez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.

Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03

 被引用回数:1 パーセンタイル:72.68(Physics, Nuclear)

理化学研究所RIビームファクトリーにて中性子過剰核$$^{50}$$Arビームからの1中性子ノックアウト反応実験を行い、$$^{49}$$Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の$$1/2^-$$への分光学的因子が大きいことから、始状態の$$^{50}$$Arの基底状態において中性子が$$p_{1/2}$$軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる$$^{52}$$Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。

論文

ALTEMIS: Using integrated hydrology and reactive transport modeling to support resilience at the Savannah River Site

Xu, Z.*; Litzinger, A.*; 佐久間 一幸; Arora, B.*; Hazenberg, P.*; Wang, L.*; Gonzalez Raymat, H.*; Fabricatore, E.*; Wainwright, Haruko*; Eddy-Dilek, C.*

Proceedings of Waste Management Symposia 2024 (WM2024) (Internet), 14 Pages, 2024/03

We leverage the Advanced Terrestrial Simulator (ATS), a comprehensive model encompassing overland flow, groundwater processes, canopy and ground evapotranspiration effects. ATS is integrated with reactive transport models, including PFLOTRAN and CrunchFlow, to capture the intricate dynamics of key nuclear-related geochemical species. The Advanced Long-term Environmental Monitoring Systems (ALTEMIS) project extends its efforts across multiple scales: 1) Watershed Scale ATS Model: At the Savannah River Site, we employ a watershed-scale ATS model to quantify the water budget and estimate evapotranspiration fluxes.; 2) Integrated Hydrology Model for Floodplains: Our integrated hydrology model zooms in on the floodplain of Fourmiles Creek, enabling quantification of upwelling groundwater fluxes into wetlands and surface ponds. It also used to assess contaminant migration into Fourmiles Creek; 3) Fully Integrated Reactive Transport Model: Focused on the F-Area seepage basin, one of the largest nuclear waste processing facilities, we develop both 2D transect and 3D basin models. These models estimate the behavior of radioactive elements such as uranium and tritium, as well as non-reactive geochemical species.; 4) Sr-90 Sorption Model: Informed by extensive Sr-90 sorption experiments on minerals and core samples, we parameterize both electrostatic and non-electrostatic sorption models for Sr-90. These models are integrated into multiple reactive transport frameworks, significantly enhancing our ability to accurately predict Sr-90 migration under varying pH conditions.

論文

Abnormal grain growth; A Spontaneous activation of competing grain rotation

Liss, K.-D.*; 徐 平光; 城 鮎美*; Zhang, S. Y.*; 行武 栄太郎*; 菖蒲 敬久; 秋田 貢一*

Advanced Engineering Materials, 26(4), p.202300470_1 - 202300470_9, 2024/02

 被引用回数:2 パーセンタイル:15.14(Materials Science, Multidisciplinary)

In polycrystals, grains with certain orientations grow at high temperatures at the expense of grains with other unfavorable orientations. Grain growth involves a variety of situations and mechanisms that make experimental study, modeling, and understanding extremely complex. Normal grain growth occurs in a self-similar manner, with curved grain boundaries serving as the driving force and a parabolic growth law that scales up the grain size by the square root of time. More complex growth forms include boundary pinning of precipitates and other boundaries, topological transitions that alter driving forces, grain coalescence and anomalous grain growth, but these are considered "erratic" and their initiation is an open question in modern research, without a simple experimental approach on how they should be studied. Here, we show that grain rotation upon coalescence is spontaneously activated between one grain and a favorable neighbor, through the necessary diffusive mass transport at further boundaries of the same grain leading to their activation and a competitive "erratic" reorientation in a zigzag way, while other grains in the matrix remain stable. After two grains have eventually coalesced, their surrounding boundaries are still activated leading to further rotation and growth, filling the missing puzzle stone in thermodynamic theory between normal and abnormal growth, the latter stating that abnormal growth only takes place when the size of the growing grain is already large. Prerequisites and postulates of abnormal grain growth are based on advantageous texture, grain boundary mobility, enhanced diffusion kinetics and coalescence, which can be well explained by our observations. Moreover, our observations have been enabled through a novel experimental approach using the white-beam X-ray Laue diffraction method in bulk transmission mode on a polycrystalline.

論文

The BCC $$rightarrow$$ FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloy

Li, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*

Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02

 被引用回数:2 パーセンタイル:81.14(Nanoscience & Nanotechnology)

The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in Fe$$_{42}$$Mn$$_{34}$$Al$$_{15}$$Ni$$_{7.5}$$Ti$$_{1.5}$$ alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC $$rightarrow$$ FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.

論文

Principal preferred orientation evaluation of steel materials using time-of-flight neutron diffraction

徐 平光; Zhang, S.-Y.*; Harjo, S.; Vogel, S. C.*; 友田 陽*

Quantum Beam Science (Internet), 8(1), p.7_1 - 7_13, 2024/01

Comprehensive information about the ${it in situ}$ microstructure and crystal structure evolution during the preparation/production processes of various materials is in great demand in order to precisely control the microstructure morphology and the preferred orientation characteristics for the excellent strength-ductility-toughness balance of advanced engineering materials. ${it In situ}$ isothermal annealing experiments of cold rolled 17Ni-0.2C (mass %) martensitic steel sheets were carried out by using the TAKUMI and ENGIN-X time-of-flight neutron diffractometers, respectively. The inverse pole figures based on full-profile refinement were extracted to roughly evaluate the preferred orientation features along three principal sample directions of investigated steel sheets using the General Structure Analysis System (GSAS) software with built-in generalized spherical harmonic functions. The consistent rolling direction (RD) inverse pole figures from TAKUMI and ENGIN-X have confirmed that the time-of-flight neutron diffraction has high repeatability and statistical reliability, revealing that the principal preferred orientation evaluation of steel materials is available through 90$$^{circ}$$ TD $$rightarrow$$ ND (transverse direction $$rightarrow$$ normal direction) rotation of the investigated specimen on the sample stage during two neutron diffraction experiments. Moreover, these RD, TD and ND inverse pole figures before and after in situ experiments were compared with the corresponding inverse pole figures recalculated respectively from the MUSASI-L complete pole figure measurement and the HIPPO in situ microstructure evaluation. The similar orientation distribution characteristics suggested that the principal preferred orientation evaluation method can be applied to in situ microstructure evolution of bulk orthorhombic materials and spatially resolved principal preferred orientation mappings of large engineering structure parts.

論文

Electromagnetic moments of the antimony isotopes $$^{112-133}$$Sb

Lechner, S.*; 宮城 宇志*; Xu, Z. Y.*; Bissell, M. L.*; Blaum, K.*; Cheal, B.*; Devlin, C. S.*; Garcia Ruiz, R. F.*; Ginges, J. S. M.*; Heylen, H.*; et al.

Physics Letters B, 847, p.138278_1 - 138278_9, 2023/12

 被引用回数:4 パーセンタイル:77.61(Astronomy & Astrophysics)

不安定核を含むアンチモン同位体$$^{112-133}$$Sbの磁気モーメントと電気的四重極モーメントをレーザー分光を用いて測定した。現象論的な相互作用と有効演算子を用いた殻模型計算によって測定値をよく再現することができた。第一原理に基づいたVS-IMSRG法による殻模型計算では、磁気モーメントは現象論的な有効演算子を用いればよく実験値を再現するものの、電気的四重極モーメントについては有効電荷を用いても現象論的な相互作用を用いた計算ほどには実験値を再現することができなかった。

論文

Cryogenic impact fracture behavior of a high-Mn austenitic steel using electron backscatter diffraction and neutron Bragg-edge transmission imaging

Wang, Y. W.*; Wang, H. H.*; Su, Y. H.; 徐 平光; 篠原 武尚

Materials Science & Engineering A, 887, p.145768_1 - 145768_13, 2023/11

 被引用回数:5 パーセンタイル:66.30(Nanoscience & Nanotechnology)

A unique impact fracture behavior is found in a high-Mn austenitic steel (24Mn-4Cr-0.4C-0.3Cu) in this work. The steel exhibits concurrent twinning-induced plasticity (TWIP) effect and the transformation-induced plasticity (TRIP) effect. By analyzing the load-deflection curves recorded during Charpy impact testing, the resistance to crack initiation and propagation is quantified from the absorbed energy. The high-Mn steel demonstrates good resistance to crack initiation at 273 K and 77 K. However, as the temperature decreases from 273 K to 77 K, there is an accelerated transition from stable crack growth to unstable crack growth during impact, resulting in the deterioration of resistance to crack propagation. The plastic deformation of the impact-tested samples, especially in the region close to the crack-path profile was quantitatively analyzed using neutron Bragg-edge transmission (BET) imaging. The deformation zones, divided by using the width of the 200 Bragg edge, exhibit good agreement with the impact absorbed energy characteristics obtained from dynamic load-deflection curves. Moreover, the unstable growth transition point was roughly determined on the impact-tested sample. Then, the electron backscatter diffraction (EBSD) technique is employed to examine the deformation microstructure along the crack-path in the impact-tested samples. The results revealed the dual roles of TRIP effect in impact toughness of the high-Mn steel. On one hand, the TRIP effect plays a positive role in improving resistance to crack initiation and propagation. On the other hand, the excessive accumulation of brittle $$varepsilon$$/$$alpha$$'-martensite caused by the enhanced TRIP effect at 77 K leads to quasi-cleavage fracture, thereby playing a negative role. Finally, we discussed the prominent toughening mechanisms associated with the TWIP and TRIP effects, which greatly impact the impact fracture behavior.

論文

Validation of the $$^{10}$$Be ground-state molecular structure using $$^{10}$$Be($$p,palpha$$)$$^{6}$$He triple differential reaction cross-section measurements

Li, P. J.*; Beaumel, D.*; Lee, J.*; Assi$'e$, M.*; Chen, S.*; Franchoo, S.*; Gibelin, J.*; Hammache, F.*; Harada, T.*; 延与 佳子*; et al.

Physical Review Letters, 131(21), p.212501_1 - 212501_7, 2023/11

 被引用回数:12 パーセンタイル:90.93(Physics, Multidisciplinary)

$$^{10}$$Beのクラスター構造を($$p,palpha$$)反応を用いて調査した。三重微分断面積が実験的に測定され、Tohsaki-Horiuchi-Schuck-R$"o$pke波動関数の方法や反対称化分子動力学を用いた歪曲波インパルス近似計算と比較した。実験データと理論計算の顕著な一致が確認され、$$^{10}$$Beの比較的コンパクトな分子状態を確認した。

論文

PANDORA Project for the study of photonuclear reactions below $$A=60$$

民井 淳*; Pellegri, L.*; S$"o$derstr$"o$m, P.-A.*; Allard, D.*; Goriely, S.*; 稲倉 恒法*; Khan, E.*; 木戸 英治*; 木村 真明*; Litvinova, E.*; et al.

European Physical Journal A, 59(9), p.208_1 - 208_21, 2023/09

 被引用回数:3 パーセンタイル:69.58(Physics, Nuclear)

光核反応は原子核構造の観点からも応用の観点からも重要であるにも関わらず、その反応断面積は未だに不定性が大きい。近年、超高エネルギー宇宙線の起源を探るために、鉄よりも軽い原子核の光核反応断面積を正確に知る必要が指摘されている。この状況を打破するため、原子核物理の実験、理論、宇宙物理の共同研究となるPANDORAプロジェクトが始まった。本論文はその計画の概要をまとめたものである。原子核実験ではRCNP、iThembaによる仮想光子実験とELI-NPによる実光子実験などが計画されている。原子核理論では、乱雑位相近似計算、相対論的平均場理論、反対称化分子動力学、大規模殻模型計算などが計画されている。これらで得られた信頼性の高い光核反応データベースと宇宙線伝搬コードを組み合わせ、超高エネルギー宇宙線の起源の解明に挑む。

論文

Level structures of $$^{56,58}$$Ca cast doubt on a doubly magic $$^{60}$$Ca

Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.

Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08

 被引用回数:6 パーセンタイル:87.41(Astronomy & Astrophysics)

$$^{57,59}$$Scからの1陽子ノックアウト反応を用いて、$$^{56}$$Caと$$^{58}$$Caのガンマ崩壊を観測した。$$^{56}$$Caでは1456(12)keVの$$gamma$$線遷移が、$$^{58}$$Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的に$$2^{+}_{1} rightarrow 0^{+}_{gs}$$と割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、$$2^{+}_{1}$$準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素である$$0_{f5/2}$$$$0_{g9/2}$$軌道はほぼ縮退しており、これは$$^{60}$$Caが二重魔法核である可能性を排除し、Ca同位体のドリップラインを$$^{70}$$Caあるいはそれ以上にまで広げる可能性がある。

論文

Multiple mechanisms in proton-induced nucleon removal at $$sim$$100 MeV/nucleon

Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; G$'o$mez-Ramos, M.*; 緒方 一介*; 吉田 数貴; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.

Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04

 被引用回数:11 パーセンタイル:90.93(Physics, Multidisciplinary)

大きなフェルミ面非対称性を持つ陽子過剰な$$^{14}$$O原子核からの100MeV/nucleonでの陽子による陽子・中性子除去反応について報告した。この結果は、quasi-freeノックアウト反応、非弾性散乱、核子移行反応を含む複数の反応機構の定量的寄与を初めて示すものである。このようなエネルギー領域では通常無視される非弾性散乱と核子移行の寄与が、弱束縛陽子と強束縛中性子の除去反応断面積にそれぞれ約50%と30%寄与していることが示された。

論文

Corrosion fatigue crack growth behavior of a structurally gradient steel for high-speed railway axles

Ao, N.*; Zhang, H.*; Xu, H. H.*; Wu, S. C.*; Liu, D.*; 徐 平光; Su, Y. H.; Kang, Q. H.*; Kang, G. Z.*

Engineering Fracture Mechanics, 281, p.109166_1 - 109166_14, 2023/03

 被引用回数:12 パーセンタイル:84.20(Mechanics)

Considering the complex service environments that high-speed railway axles are subjected to, the fatigue crack growth (FCG) behavior of a structurally gradient axle steel with different pre-crack depths both in air and corrosive medium was investigated at a frequency of 5 Hz. The results indicated that in the high $$Delta$$$$K$$ region, FCG rate was dramatically accelerated by corrosion, but the gap narrows as $$Delta$$$$K$$ decreased. The accelerated corrosion FCG rate was a comprehensive result of the acceleration effect of the anodic dissolution, hydrogen-enhanced localized plasticity and the retardation effect of corrosion-induced crack-tip blunting. Despite the fact that the corrosion resistance gradually decreased as the pre-crack depth increased, the FCG rate in the corrosive medium gradually decreased. This was because fatigue loading played a more important role than corrosion in accelerating the corrosion FCG rate.

219 件中 1件目~20件目を表示