Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
HPC Technology Promotion Office, Center for Computational Science & e-Systems
JAEA-Review 2024-044, 121 Pages, 2025/01
JAEA-Review-2024-044.pdf:7.42MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. Over the past 10 years or so, the publication of papers utilizing computational science and technology at JAEA has accounted for about 20 percent of the total publications each fiscal year. The supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2023, the system was utilized in R&D activities that were prioritized in the Fourth Medium- to Long-Term Plan, including contributing to carbon neutrality through the development of innovative technologies such as improving safety, creating innovation by promoting diverse R&D related to nuclear science and technology, promoting R&D in response to the accident at TEPCO's Fukushima Daiichi Nuclear Power Station, steadily implementing technological developments for the treatment and disposal of high-level radioactive waste, and supporting nuclear safety regulatory administration and nuclear disaster prevention by promoting safety research for these purposes. This report presents a great number of R&D results accomplished by using the system in FY2023, as well as user support, operational records and overviews of the system, and so on.
Nemoto, Takahiro; Fujiwara, Yusuke; Arakawa, Ryoki; Choyama, Yuya; Nagasumi, Satoru; Hasegawa, Toshinari; Yokoyama, Keisuke; Watanabe, Masashi; Onishi, Takashi; Kawamoto, Taiki; et al.
JAEA-Technology 2024-003, 17 Pages, 2024/06
JAEA-Technology-2024-003.pdf:1.91MB
In order to investigate the cause of the increase in differential pressure in the primary helium circulator filter that occurred during the RS-14 cycle, a clogged filter was investigated. As a result of the investigation, deposits caused by silicone oil were confirmed on the surface of the filter element. These results revealed that the cause of filter clogging was silicone oil mixed into the primary system due to performance deterioration of the charcoal filter in the gas circulator of primary helium purification system. As a measure to prevent the recurrence of this event, in addition to the conventional management based on operating hours for replacing of charcoal filter in the gas circulator of primary helium purification system, we have established a new replacement plan for every three years.
HPC Technology Promotion Office, Center for Computational Science & e-Systems
JAEA-Review 2023-018, 159 Pages, 2023/12
JAEA-Review-2023-018.pdf:13.62MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. Over the past 10 years or so, the publication of papers utilizing computational science and technology at JAEA has accounted for about 20 percent of the total publications each fiscal year. The supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2022, the system was used for R&D of light water reactors, high-temperature gas reactors, and fast reactors to contribute to carbon neutrality as a priority issue, as well as for JAEA's major projects such as Various R&D related to nuclear science and technology, R&D related to the response to the accident at TEPCO's Fukushima Daiichi Nuclear Power Station, Development of technology for treatment and disposal of high-level radioactive waste, Support of nuclear safety regulation and nuclear disaster prevention, and safety research for this purpose. This report presents a great number of R&D results accomplished by using the system in FY2022, as well as user support, operational records and overviews of the system, and so on.
Nemoto, Takahiro; Arakawa, Ryoki; Kawakami, Satoru; Nagasumi, Satoru; Yokoyama, Keisuke; Watanabe, Masashi; Onishi, Takashi; Kawamoto, Taiki; Furusawa, Takayuki; Inoi, Hiroyuki; et al.
JAEA-Technology 2023-005, 33 Pages, 2023/05
JAEA-Technology-2023-005.pdf:5.25MB
During shut down of the HTTR (High Temperature engineering Test Reactor) RS-14 cycle, an increasing trend of filter differential pressure for the helium gas circulator was observed. In order to investigate this phenomenon, the blower of the primary helium purification system was disassembled and inspected. As a result, it is clear that the silicon oil mist entered into the primary coolant due to the deterioration of the charcoal filter performance. The replacement and further investigation of the filter are planning to prevent the reoccurrence of the same phenomenon in the future.
HPC Technology Promotion Office, Center for Computational Science & e-Systems
JAEA-Review 2022-035, 219 Pages, 2023/01
JAEA-Review-2022-035.pdf:10.94MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. As shown in the fact that about 20 percent of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2021, the system was used for R&D aiming to restore Fukushima (environmental recovery and nuclear installation decommissioning) as a priority issue, as well as for JAEA's major projects such as research and development of fast reactor cycle technology, research for safety improvement in the field of nuclear energy, and basic nuclear science and engineering research. This report presents a great number of R&D results accomplished by using the system in FY2021, as well as user support, operational records and overviews of the system, and so on.
Onoda, Yuichi; Uchita, Masato*; Tokizaki, Minako*; Okazaki, Hitoshi*
Proceedings of 29th International Conference on Nuclear Engineering (ICONE 29) (Internet), 6 Pages, 2022/08
The safety analyses were carried out to confirm the sufficiency of the function of the plant protection system against the pump/diagrid link rupture. The target plant is a pool-type SFR of about 600 MWe class equipped with an axially homogeneous core currently under development in Japan. In the pool-type SFR, the primary system piping connects primary pump and the high-pressure sodium plenum located at the inlet of fuel sub-assemblies and called "pump/diagrid link". Because this piping is submerged in the reactor vessel, it is difficult to detect small scale sodium leakage in this piping, and thus a certain large pipe break like guillotine should be assumed and evaluated as a design basis event. In order to confirm the detectability of pump/diagrid link rupture by safety protection system signals, a series of analyses of the guillotine break for a pump/diagrid link were carried out. Sensitivity study had also been performed to consider the uncertainty of the reactivity coefficient in the analyses. The sufficiency of the function of the plant protection system against the pump/diagrid link rupture was confirmed by the analysis results that at least two signals are transmitted for the detection of the event, which is the development target of the plant protection system in pool-type SFR.
Nakano, Keita; Iwamoto, Hiroki; Nishihara, Kenji; Meigo, Shinichiro; Sugawara, Takanori; Iwamoto, Yosuke; Takeshita, Hayato*; Maekawa, Fujio
JAEA-Research 2021-018, 41 Pages, 2022/03
JAEA-Research-2021-018.pdf:2.93MB
Neutronic analysis of beam window of the Accelerator-Driven System (ADS) proposed by Japan Atomic Energy Agency (JAEA) has been conducted using PHITS and DCHAIN-PHITS codes. We investigate gas production of hydrogen and helium isotopes in the beam window, displacement per atom of beam window material, and heat generation in the beam window. In addition, distributions of produced nuclides, heat density, and activity are derived. It was found that at the maximum 12500 appm H production, 1800 appm He production, and damage of 62.1 DPA occurred in the beam window by the ADS operation. On the other hand, the maximum heat generation in the beam window was 374 W/cm
. In the analysis of LBE, 
Bi and 
Po were found to be the dominant nuclides in decay heat and radioactivity. Furthermore, the heat generation in the LBE by the proton beam was maximum around 5 cm downstream of the beam window, which was 945 W/cm.
HPC Technology Promotion Office, Center for Computational Science & e-Systems
JAEA-Review 2021-022, 187 Pages, 2022/01
JAEA-Review-2021-022.pdf:10.11MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. As shown in the fact that about 20 percent of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2020, the system was used for R&D aiming to restore Fukushima (environmental recovery and nuclear installation decommissioning) as a priority issue, as well as for JAEA's major projects such as research and development of fast reactor cycle technology, research for safety improvement in the field of nuclear energy, and basic nuclear science and engineering research. This report presents a great number of R&D results accomplished by using the system in FY2020, as well as user support, operational records and overviews of the system, and so on.
HPC Technology Promotion Office, Center for Computational Science & e-Systems
JAEA-Review 2020-021, 215 Pages, 2021/02
JAEA-Review-2020-021.pdf:13.11MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. As shown in the fact that about 20 percent of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2019, the system was used for R&D aiming to restore Fukushima (environmental recovery and nuclear installation decommissioning) as a priority issue, as well as for JAEA's major projects such as research and development of fast reactor cycle technology, research for safety improvement in the field of nuclear energy, and basic nuclear science and engineering research. This report presents a great number of R&D results accomplished by using the system in FY2019, as well as user support, operational records and overviews of the system, and so on.
HPC Technology Promotion Office, Center for Computational Science & e-Systems
JAEA-Review 2019-017, 182 Pages, 2020/01
JAEA-Review-2019-017.pdf:11.11MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. As shown in the fact that about 20 percent of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2018, the system was used for R&D aiming to restore Fukushima (environmental recovery and nuclear installation decommissioning) as a priority issue, as well as for JAEA's major projects such as research and development of fast reactor cycle technology, research for safety improvement in the field of nuclear energy, and basic nuclear science and engineering research. This report presents a great number of R&D results accomplished by using the system in FY2018, as well as user support, operational records and overviews of the system, and so on.
Hashimoto, Shintaro; Sato, Tatsuhiko
Journal of Nuclear Science and Technology, 56(4), p.345 - 354, 2019/04
Times Cited Count：7 Percentile：54.72(Nuclear Science & Technology)Particle transport simulations based on the Monte Carlo method have been applied to shielding calculations. Estimation of not only statistical uncertainty related to the number of trials but also systematic one induced by unclear physical quantities is required to confirm the reliability of calculated results. In this study, we applied a method based on analysis of variance to shielding calculations. We proposed random- and three-condition methods. The first one determines randomly the value of the unclear quantity, while the second one uses only three values: the default value, upper and lower limits. The systematic uncertainty can be estimated adequately by the random-condition method, though it needs the large computational cost. The three-condition method can provide almost the same estimate as the random-condition method when the effect of the variation is monotonic. We found criterion to confirm convergence of the systematic uncertainty as the number of trials increases.
Information Technology Systems' Management and Operating Office
JAEA-Review 2018-018, 167 Pages, 2019/02
JAEA-Review-2018-018.pdf:34.23MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power and utilizes computational science and technology in many activities. As shown in the fact that about 20 percent of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2017, the system was used for R&D aiming to restore Fukushima (environmental recovery and nuclear installation decommissioning) as a priority issue, and for JAEA's major projects such as R&D of fast reactor cycle technology, research for safety improvement in the field of nuclear energy, and basic nuclear science and engineering research. This report presents a great number of R&D results accomplished by using the system in FY2017, as well as user support, operational records and overviews of the system, and so on.
Wan, T.; Obayashi, Hironari; Sasa, Toshinobu
Nuclear Technology, 205(1-2), p.188 - 199, 2019/01
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)Udagawa, Makoto; Li, Y.; Nishida, Akemi; Nakamura, Izumi*
International Journal of Pressure Vessels and Piping, 167, p.2 - 10, 2018/11
Times Cited Count：9 Percentile：53.47(Engineering, Multidisciplinary)It is important to assure the structural Integrity of piping systems under severe earthquakes because those systems comprise the pressure boundary for coolant with high pressure and temperature. In this study, we examine the seismic safety capacity of piping systems under severe dynamic seismic loading using a series of dynamic-elastic-plastic analyses focusing on dynamic excitation experiments of 3D piping systems which was tested by NIED. Analytical results were consistent with experimental data in terms of natural frequency, natural vibration mode, response accelerations, elbow opening-closing displacements, strain histories, failure position, and low-cycle fatigue failure lives. Based on these results, we concluded that the analytical model used in the study can be applied to failure behavior evaluation for piping systems under severe dynamic seismic loading.
Information Technology Systems' Management and Operating Office
JAEA-Review 2017-023, 157 Pages, 2018/02
JAEA-Review-2017-023.pdf:22.68MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. As shown in the fact that about 20% of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2016, the system was used for R&D aiming to restore Fukushima (environmental recovery and nuclear installation decommissioning) as a priority issue, as well as for JAEA's major projects such as research and development of fast reactor cycle technology, research for safety improvement in the field of nuclear energy, and basic nuclear science and engineering research. This report presents a great number of R&D results accomplished by using the system in FY2016, as well as user support, operational records and overviews of the system, and so on.
Nakamura, Hideo
Proceedings of ANS International Conference on Best Estimate Plus Uncertainties Methods (BEPU 2018) (USB Flash Drive), 8 Pages, 2018/00
no abstracts in English
Akimoto, Hajime; Sugawara, Takanori
JAEA-Data/Code 2016-008, 87 Pages, 2016/09
JAEA-Data-Code-2016-008.pdf:15.62MB
Thermal hydraulic behavior in a lead-bismuth cooled accelerator driven system (ADS) is analyzed under normal operation condition. Input data for the ADS version of J-TRAC code have been constructed to integrate the conceptual design. The core part of the ADS is modeled in detail to evaluate the core radial power profile effect on the core cooling. As the result of the analyses, the followings are found; (1) Both maximum clad temperature and fuel temperature are below the design limits. (2) The radial power profile has little effect on the coolant flow distribution among fuel assemblies. (3) The radial power profile has little effect on the heat transfer coefficients along fuel rods. (4) The thermal hydraulic behaviors along four steam generators are identical. The thermal hydraulic behaviors along two pumps are also identical. A fast running input data is developed by the simplification of the detailed input data based on the findings mentioned above.
Information Technology Systems' Management and Operating Office
JAEA-Review 2015-028, 229 Pages, 2016/02
JAEA-Review-2015-028.pdf:53.37MB
Japan Atomic Energy Agency (JAEA) conducts research and development (R&D) in various fields related to nuclear power as a comprehensive institution of nuclear energy R&Ds, and utilizes computational science and technology in many activities. As shown in the fact that about 20% of papers published by JAEA are concerned with R&D using computational science, the supercomputer system of JAEA has become an important infrastructure to support computational science and technology. In FY2014, the system was used. For R&D aiming to restore Fukushima (nuclear plant decommissioning and environmental restoration) as a priority issue, as well as for JAEA's major projects such as Fast Reactor Cycle System, Fusion R&D and Quantum Beam Science. This report presents a great amount of R&D results accomplished by using the system in FY2014, as well as user support, operational records and overviews of the system, and so on.
Mascari, F.*; Nakamura, Hideo; Umminger, K.*; De Rosa, F.*; D'Auria, F.*
Proceedings of 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16) (USB Flash Drive), p.4921 - 4934, 2015/08
Akimoto, Hajime
JAEA-Data/Code 2014-031, 75 Pages, 2015/03
JAEA-Data-Code-2014-031.pdf:37.23MB
A thermal-hydraulic analysis code for transmutation system with lead-bismuth cooled accelerator-driven system (ADS) has been developed using the Japanese-version of Transient Reactor Analysis Code (J-TRAC) as the framework to apply the design studies of ADS. To identify the required capabilities of the thermal-hydraulic analysis code for ADS, previous thermal-hydraulic analyses of light water reactors, sodium-cooled fast reactor and ADS have been surveyed. To make up for insufficient capabilities of the J-TRAC code as a thermal-hydraulic analysis code of ADS, physical properties of lead-bismuth eutectic (LBE), argon gas and nitride nuclear fuel were implemented to the J-TRAC code. It was confirmed that the implemented capabilities worked as expected through verification calculations on (1) single-phase LBE flow, (2) heat transfer in a fuel assembly, and (3) heat transfer in a steam generator.
