Present status of J-PARC MUSE

Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Natori, Hiroaki*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Tampo, Motonobu*; Kawamura, Naritoshi*; Teshima, Natsuki*; et al.

Journal of Physics; Conference Series, 2462, p.012033_1 - 012033_5, 2023/03

https://doi.org/10.1088/1742-6596/2462/1/012033

Development of a bunch-width monitor for low-intensity muon beam below a few MeV

Sue, Yuki*; Yotsuzuka, Mai*; Futatsukawa, Kenta*; Hasegawa, Kazuo; Iijima, Toru*; Iinuma, Hiromi*; Inami, Kenji*; Ishida, Katsuhiko*; Kawamura, Naritoshi*; Kitamura, Ryo; et al.

Physical Review Accelerators and Beams (Internet), 23(2), p.022804_1 - 022804_7, 2020/02

https://doi.org/10.1103/PhysRevAccelBeams.23.022804

A destructive monitor to measure the longitudinal bunch width of a low-energy and low-intensity muon beam was developed. This bunch-width monitor (BWM) employed microchannel plates to detect a single muon with high time resolution. In addition, constant-fraction discriminators were adopted to suppress the time-walk effect. The time resolution was measured to be 65 ps in rms using a picosecond-pulsed laser. This resolution satisfied the requirements of the muon linac of the J-PARC E34 experiment. We measured the bunch width of negative-muonium ions accelerated with a radio-frequency quadrupole using the BWM. The bunch width was successfully measured to be 54 11 ns, which is consistent with the simulation.

Bunch size measurement with high time resolution for RF accelerated muon beam

Sue, Yuki*; Iijima, Toru*; Inami, Kenji*; Yotsuzuka, Mai*; Iinuma, Hiromi*; Nakazawa, Yuga*; Otani, Masashi*; Kawamura, Naritoshi*; Shimomura, Koichiro*; Futatsukawa, Kenta*; et al.

Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.55 - 60, 2019/07

https://www.pasj.jp/web_publish/pasj2019/proceedings/PDF/WEOI/WEOI05.pdf

The result of bunch size measurement of muon accelerated by RFQ up to 89 keV is presented in this paper. A four-stage muon linac for precise measurement of muon property is under construction in the J-PARC. The demonstration of the first muon RF acceleration with an RFQ linac was conducted and the transverse profile of the accelerated muons was measured in 2017. As one of the remaining issues for the beam diagnostic system, the longitudinal beam profile after the RFQ should be measured to match the profile to the designed acceptance of the subsequent accelerator. For this purpose, the new longitudinal beam monitor using the microchannel plate is under development. The time resolution of the monitor aims to be around 30 to 40 ps corresponding to 1% of a period of an operating frequency of the accelerator, which is 324 MHz. On November 2018, the bunch size of accelerated negative muonium ion of 89 keV with the RFQ was measured using this monitor at the J-PARC MLF. The measured bunch width is ns, which is consistent with the simulation.

Development of the longitudinal beam monitor with high time resolution for a muon linac in the J-PARC E34 experiment

Yotsuzuka, Mai*; Iijima, Toru*; Inami, Kenji*; Sue, Yuki*; Iinuma, Hiromi*; Nakazawa, Yuga*; Saito, Naohito; Hasegawa, Kazuo; Kondo, Yasuhiro; Kitamura, Ryo; et al.

Proceedings of 10th International Particle Accelerator Conference (IPAC '19) (Internet), p.2571 - 2574, 2019/06

https://doi.org/10.18429/JACoW-IPAC2019-WEPGW042

The J-PARC E34 experiment aims to measure the muon anomalous magnetic moment and the electric dipole moment with a high precision. In this experiment, thermal muonium is produced and ionized by laser resonance to generate ultra-slow muons, which are then accelerated in a multistage muon linac. In order to satisfy the experimental requirements, suppression of the emittance growth during the acceleration is necessary. Because the main cause of the emittance growth is beam mismatching between the accelerating stages, the transverse and longitudinal beam monitoring is important. The longitudinal beam monitor has to measure the bunch length with the resolution equivalent to tens of picoseconds, which is 1% of the acceleration phase of 324 MHz. In addition, it should be sensitive to single muon because the beam intensity is limited during the commissioning phase. To realize above requirements, we are developing a longitudinal beam monitor with a micro channel plate, and the test bench to evaluate the monitor performance. So far, the time resolution of the beam monitor was obtained to be 65 ps in RMS including the jitter on the test bench. We also succeeded in measuring the longitudinal bunch size of the muon beam accelerated by RFQ using the beam monitor. Further improvement of the measurement system is needed to guarantee the required accuracy. In this paper, the results of the performance evaluation for this beam monitor are reported.

Muon profile measurement after acceleration with a radio-frequency quadrupole linac

Otani, Masashi*; Sue, Yuki*; Fukao, Yoshinori*; Futatsukawa, Kenta*; Kawamura, Naritoshi*; Mibe, Tsutomu*; Miyake, Yasuhiro*; Shimomura, Koichiro*; Yamazaki, Takayuki*; Iijima, Toru*; et al.

Journal of Physics; Conference Series, 1067(5), p.052012_1 - 052012_7, 2018/09

https://doi.org/10.1088/1742-6596/1067/5/052012

We have measured the muon beam profile after acceleration using a radio frequency quadrupole linac (RFQ). Positive muons are injected to an aluminum degrader and negative muoniums (Mu) are generated. The generated Mus are extracted by an electrostatic lens and accelerated to 89 keV by the RFQ. The accelerated Mus are transported to a beam profile monitor (BPM) through a quadrupole magnet pair and a bending magnet. The BPM consists of a micro-channel plate, a phospher screen, and a CCD camera. Measured profile in the vertical direction is consistent to the simulation. This profile measurement is one of milestones for realizing a muon linac for measurement of the muon anomalous magnetic moment at the Japan Proton Accelerator Research Complex.

First muon acceleration using a radio-frequency accelerator

Bae, S.*; Choi, H.*; Choi, S.*; Fukao, Yoshinori*; Futatsukawa, Kenta*; Hasegawa, Kazuo; Iijima, Toru*; Iinuma, Hiromi*; Ishida, Katsuhiko*; Kawamura, Naritoshi*; et al.

Physical Review Accelerators and Beams (Internet), 21(5), p.050101_1 - 050101_6, 2018/05

https://doi.org/10.1103/PhysRevAccelBeams.21.050101

Muons have been accelerated by using a radio-frequency accelerator for the first time. Negative muonium atoms (Mu), which are bound states of positive muons and two electrons, are generated from through the electron capture process in an aluminum degrader. The generated Mu's are initially electrostatically accelerated and injected into a radio-frequency quadrupole linac (RFQ). In the RFQ, the Mu's are accelerated to 89 keV. The accelerated Mu's are identified by momentum measurement and time of flight. This compact muon linac opens the door to various muon accelerator applications including particle physics measurements and the construction of a transmission muon microscope.

Document collection of the 31st Technical Special Committee on Fugen Decommissioning

Kutsuna, Hideki; Yamazaki, Koichi; Kadowaki, Haruhiko; Iguchi, Yukihiro

JAEA-Review 2015-008, 39 Pages, 2015/06

JAEA-Review-2015-008.pdf:8.77MB

Fugen Decommissioning Engineering Center has been establishing "Technical special committee on Fugen decommissioning" which consists of the members well-informed, aiming to make good use of Fugen as a place for technological development which is opened inside and outside the country, as the central point in the energy research and development base making project of Fukui prefecture, and to utilize the outcome in our decommissioning to the technical development effectively. This report compiles presentation materials "The Current Situation of Fugen Decommissioning", "Applicability Test for Dismantling with the Diamond Wire Saw using equipments used in Fugen", "Status of the Tritium Removal and Evaluation of the Efficiency of the Room-Temperature Vacuum drying" and "Integration Policy of Knowledge Management System for Fugen", presented in the 31st Technical special committee on Fugen decommissioning which was held on March 13, 2015.

Annual report for research on geosphere stability for long-term isolation of radioactive waste in fiscal years 2010

Yasue, Kenichi; Asamori, Koichi; Tanikawa, Shinichi; Yamada, Kunimi; Yamasaki, Seiko; Kokubu, Yoko; Niwa, Masakazu; Doke, Ryosuke; Kusano, Tomohiro; Hanamuro, Takahiro; et al.

JAEA-Research 2011-023, 113 Pages, 2011/10

JAEA-Research-2011-023.pdf:10.9MB

This annual report documents the progress of R&D in the first fiscal year during the JAEA 2nd Midterm Plan (FY 2010 - 2014) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. The planed framework is structured into the following categories: (1) development and systematization of investigation techniques for selecting suitable sites in geosphere stability, (2) development, application and verification of prediction models for evaluating the changes of geological environment in thermal, hydraulic, mechanical and geochemical conditions for a long period of time, and (3) development of new dating techniques for providing information about geologic history and the timing of geologic events. In this paper, the current status of R&D activities with previous scientific and technological progress is summarized.

Research on geosphere stability for long-term isolation of radioactive waste (Progress report for fiscal years 2005 - 2009: H22 report)

Kusano, Tomohiro; Asamori, Koichi; Kurosawa, Hideki; Kokubu, Yoko; Tanikawa, Shinichi; Negi, Tateyuki; Hanamuro, Takahiro; Yasue, Kenichi; Yamasaki, Seiko; Yamada, Kunimi; et al.

JAEA-Research 2010-044, 153 Pages, 2011/01

JAEA-Research-2010-044.pdf:12.53MB

This progress report (H22 report) documents progress made during JAEA 1st Midterm Plan (FY 2005 - 2009) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. For the current 5-year R&D programme, three major goals have been defined as follows: (1) development and synthesis of investigation techniques for selecting suitable sites in geosphere stability, (2) development, application, and evaluation of prediction models for evaluating the changes of geological environment in thermal, hydraulic, mechanical and geochemical conditions for a long period of time, and (3) development of new dating techniques for providing information about geologic history and the timing of geologic events. In this paper, the current status of R&D activities with previous scientific and technological progress is summarized.

Horonobe Underground Research Laboratory project research and development plan in Phase 2; H20-21

Iwatsuki, Teruki; Sato, Haruo; Tanai, Kenji; Inagaki, Manabu; Sawada, Atsushi; Niinuma, Hiroaki; Ishii, Eiichi; Maekawa, Keisuke; Tomura, Goji; Sanada, Hiroyuki; et al.

JAEA-Research 2009-002, 156 Pages, 2009/05

JAEA-Research-2009-002.pdf:12.86MB

The research and development plan for geological investigation, engineering technology and safety assessment during the drilling of a shaft down to intermediate depth are summarized according to the Midterm Plan till 2009 Fiscal year of JAEA. This report describes subject, current status and programme in the "Phase 2: Construction phase" (investigations during construction of the underground facilities). Furthermore regarding R&D plan in next Midterm Plan of JAEA, preliminary ideas are summarized.