Commissioning of beam loading compensation system in the J-PARC MR
J-PARC MRのビームローディング補償システムの調整
田村 文彦 ; 大森 千広*; 山本 昌亘 ; 吉井 正人*; Schnase, A.*; 野村 昌弘 ; 戸田 信*; 島田 太平 ; 長谷川 豪志*; 原 圭吾*
Tamura, Fumihiko; Omori, Chihiro*; Yamamoto, Masanobu; Yoshii, Masahito*; Schnase, A.*; Nomura, Masahiro; Toda, Makoto*; Shimada, Taihei; Hasegawa, Katsushi*; Hara, Keigo*
ビームローディング補償はJ-PARC MRにおいて大強度ビームを加速するのに不可欠である。MA空胴は単一ハーモニック(h=9)で駆動されるが、空胴の帯域には隣のハーモニクス(h=8,10)も含まれるため、ウェーク電圧はこれらのハーモニクスの重畳となる。これら3つのハーモニクスのビームローディング補償として、われわれはrfフィードフォワード法を採用している。フルデジタルのフィードフォワードシステムを開発した。8つの空胴すべてについて、1.010pppの大強度ビームを用いて調整を行った。調整結果について報告する。ビームの見るインピーダンスを下げ、縦方向振動を減少させることに成功した。200kWのビームパワーでの運転に成功した。
Beam loading compensation is indispensable to accelerate high intensity proton beams in the J-PARC MR. The MA-loaded rf cavities in the MR are driven by the single harmonic (h = 9) rf signals, while the cavity frequency response covers also the neighbor harmonics (h = 8, 10). The wake voltage induced by the beam consists of the three harmonics (h = 8, 9, 10). We employ the rf feedforward method to compensate the beam loading of these harmonics. The full-digital feedforward system was developed for the MR. We have successfully commissioned the feedforward patterns for all of eight cavities by using high intensity beams with 1.010 ppp. We present the commissioning results. The impedance seen by the beam is reduced and the longitudinal oscillations due to the beam loading are reduced. By the beam loading compensation, high power beam operation at the beam power of 200 kW has been achieved.