Spark plasma sintering of MoO
for production of
Tc by neutron irradiation
中性子照射による
Tc製造のためのMoO
のプラズマ焼結
末松 久幸*; 佐藤 壮真*; 南口 誠*; 土谷 邦彦
; 西方 香緒里
; 鈴木 常生*; 中山 忠親*; 新原 晧一*
Suematsu, Hisayuki*; Sato, Soma*; Nanko, Makoto*; Tsuchiya, Kunihiko; Nishikata, Kaori; Suzuki, Tsuneo*; Nakayama, Tadachika*; Niihara, Koichi*
プラズマ焼結MoO
が、試験研究炉を用いた(n,
)法による
Moから
Tc製造のために行われた。試験は、平均粒子径0.8
m、純度99.99%のMoO
粉末を用いて、直径20mmの黒鉛ダイの中に装荷し、加圧した。これを、プラズマ焼結装置に装着し、真空中、100
200
C/minで500
600
Cで焼結した。焼結体は、結晶構造同定のためのXRD分析、化学結合状態の分析のためのEELS分析及び結晶粒子径測定のためのSEM観察を行った。550
Cで焼結した試料について、焼結密度98%を得るとともに、
Tc抽出やMoリサイクルに適した十分な特性が得られた。
Spark plasma sintering of MoO
was carried out for production of
Tc from
Mo by the (n,
) method in a nuclear reactor. Powder of MoO
with an average grain size of 0.8
m and a purity of 99.99% was pressed in a graphite die with a diameter of 20 mm. Then, the green compact was heated in a spark plasma sintering apparatus with heating rates of 100
200
C/min to 500
600
C in vacuum. After holding the temperature for 5 min, the sample was quenched. The sintered samples were characterized by powder X-ray diffraction for phase identifications, electron energy loss spectroscopy for compositional analyses and scanning electron microscopy for grain size measurements. After sintering at 550
C, a sintered bulk of MoO
with a relative density of 98% was obtained. These properties are good enough for separation of
Tc and recycle of Mo.