Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Brumm, S.*; Gabrielli, F.*; Sanchez Espinoza, V.*; Stakhanova, A.*; Groudev, P.*; Petrova, P.*; Vryashkova, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; et al.
Annals of Nuclear Energy, 211, p.110962_1 - 110962_16, 2025/02
被引用回数：5 パーセンタイル：90.97(Nuclear Science & Technology)The completed Horizon-2020 project on "Management and Uncertainties of Severe Accidents (MUSA)" has reviewed uncertainty sources and Uncertainty Quantification methodology for the purpose of assessing Severe Accidents (SA). The key motivation of the project has been to bring the advantages of the Best Estimate Plus Uncertainty approach to the field of Severe Accident. The applications brought together a large group of participants that set out to apply uncertainty analysis (UA) within their field of SA modelling expertise, in particular reactor types, but also SA code used (ASTEC, MELCOR, etc.), uncertainty quantification tools used (DAKOTA, RAVEN, etc.), detailed accident scenarios, and in some cases SAM actions. This paper synthesizes the reactor-application work at the end of the project. Analyses of 23 partners are sorted into different categories, depending on whether their main goal is/are (i) uncertainty bands of simulation results; (ii) the understanding of dominating uncertainties in specific sub-models of the SA code; (iii) improving the understanding of specific accident scenarios, with or without the application of SAM actions; or, (iv) a demonstration of the tools used and developed, and of the capability to carry out an uncertainty analysis in the presence of the challenges faced. The partners' experiences made during the project have been evaluated and are presented as good practice recommendations. The paper ends with conclusions on the level of readiness of UA in SA modelling, on the determination of governing uncertainties, and on the analysis of SAM actions.
neutron imaging and diffraction analysis revealing spatial lithiation phase evolution in an ultra-thick graphite electrodeStrobl, M.*; Baur, M. E.*; Samothrakitis, S.*; Molamud, F.*; Zhang, X.*; Tung, P. K. M.*; Schmidt, S.*; Woracek, R.*; Lee, J.*; 鬼柳 亮嗣; et al.
Advanced Energy Materials, p.2405238_1 - 2405238_9, 2025/01
Energy-efficient, safe, and reliable Li-ion batteries (LIBs) are required for a wide range of applications. The introduction of ultra-thick graphite anodes, desired for high energy densities, meets limitations in internal electrode transport properties, leading to detrimental consequences. Yet, there is a lack of experimental tools capable of providing a complete view of local processes. Here, a multi-modal measurement approach is introduced, enabling quantitative spatio-temporal observations of Li concentrations and intercalation phases in ultra-thick graphite electrodes. Neutron imaging and diffraction concurrently provide correlated multiscale information from the scale of the cell down to the crystallographic scale. In particular, the evolving formation of the solid electrolyte interphase (SEI), observation of gradients in total lithium content, as well as in the formation of ordered Li
C
phases and trapped lithium are mapped throughout the first charge-discharge cycle of the cell. Different lithiation stages co-exist during charging and discharging; delayed lithiation and delithiation processes are observed in central regions of the electrode, while the SEI formation, potential plating, and dead lithium are predominantly found closer to the interface with the separator. The study emphasizes the potential to investigate Li-ion diffusion and the kinetics of lithiation phase formation in thick electrodes.
Zhang, Z.*; 服部 高典; Song, R.*; Yu, D.*; Mole, R.*; Chen, J.*; He, L.*; Zhang, Z.*; Li, B.*
Journal of Applied Physics, 136(3), p.035105_1 - 035105_8, 2024/07
被引用回数：1 パーセンタイル：46.22(Physics, Applied)バロカロリック材料を用いた固体冷凍は、環境に優しく高効率であるため、過去10年間にわたり世界的に注目されてきた。ここでは、室温付近で立方晶から菱面体晶への相転移を起こすヘキサフルオロ燐酸ナトリウム(NaPF
)とヘキサフルオロ砒酸ナトリウム(NaAsF)における巨大バロカロリック効果を報告する。われわれは中性子粉末回折により、NaPFの低温相の構造が空間群R
の菱面体構造であることを明らかにした。NaPFとNaAsFには3つのラマン振動モード(F
, E
, A
)が存在する。相転移温度はNaPF及びNaAsFにおいてそれぞれdT
/dP=250K/GPa及び310K/GPaの割合で圧力とともに変化する。NaPFとNaAsFの圧力誘起エントロピー変化は、それぞれ約45.2Jkg
Kと35.6JkgKと決定された。飽和駆動圧力は約40MPaであった。高圧下の中性子粉末回折から、バロカロリック効果は立方晶から菱面体晶への圧力誘起相転移に関係していることが示唆された。
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 55(7), p.2175 - 2185, 2024/07
被引用回数：3 パーセンタイル：78.83(Materials Science, Multidisciplinary)High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.
Zeng, Z.*; Zhou, C.*; Zhou, H.*; Han, L.*; Chi, R.*; Li, K.*; 古府 麻衣子; 中島 健次; Wei, Y.*; Zhang, W.*; et al.
Nature Physics, 20(7), p.1097 - 1102, 2024/07
被引用回数：8 パーセンタイル：95.43(Physics, Multidisciplinary)Emergent quasiparticles with a Dirac dispersion in condensed matter systems can be described by the Dirac equation for relativistic electrons, in analogy with Dirac particles in high-energy physics. For example, electrons with a Dirac dispersion have been intensively studied in electronic systems such as graphene and topological insulators. However, charge is not a prerequisite for Dirac fermions, and the emergence of Dirac fermions without a charge degree of freedom has been theoretically predicted to be realized in Dirac quantum spin liquids. These quasiparticles carry a spin of 1/2 but are charge-neutral and so are called spinons. Here we show that the spin excitations of a kagome antiferromagnet, YCu
(OD)Br
[Br
(OD)
], are conical with a spin continuum inside, which is consistent with the convolution of two Dirac spinons. The predictions of a Dirac spin liquid model with a spinon velocity obtained from spectral measurements are in agreement with the low-temperature specific heat of the sample. Our results, thus, provide spectral evidence for a Dirac quantum spin liquid state emerging in this kagome lattice antiferromagnet. However, the locations of the conical spin excitations differ from those calculated by the nearest-neighbor Heisenberg model, suggesting the Dirac spinons have an unexpected origin.
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
被引用回数：6 パーセンタイル：97.93(Nuclear Science & Technology)In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.
Li, X.*; Zhu, R.*; Xin, J.*; Luo, M.*; Shang, S.-L.*; Liu, Z.-K.*; Yin, C.*; 舟越 賢一*; Dippenaar, R. J.*; 肥後 祐司*; et al.
CALPHAD; Computer Coupling of Phase Diagrams and Thermochemistry, 84, p.102641_1 - 102641_6, 2024/03
被引用回数：0 パーセンタイル：0.00(Thermodynamics)The phase transformations and pressure-volume dependencies of the Ti-45Al alloy with respect to pressure have been investigated by means of in-situ observation using multi anvil-type high-pressure devices and synchrotron radiation. Under hydrostatic compression from 0 to 10.1 GPa, about 2.3 vol. % of 
transforms continuously to 
2. Lattice parameters as well as volume fractions of these two phases have been determined as a function of pressure. Bulk moduli estimated using Birch-Murnaghan's equation of state are 148 GPa for the phase, 138 GPa for the 2 phase, and 149 GPa for their two-phase mixture of Ti-45Al alloy. First-principles have also applied to investigate bulk moduli of two single phases, and the deviation between calculations and measurements is discussed and attributed to mainly phase transformation. The presently study provides useful insights into thermodynamics of 2 and phases under high pressure.
TaS
Park, P.*; Cho, W.*; Kim, C.*; An, Y.*; Kang, Y.-G.*; Avdeev, M.*; Sibille, R.*; 飯田 一樹*; 梶本 亮一; Lee, K. H.*; et al.
Nature Communications (Internet), 14, p.8346_1 - 8346_9, 2023/12
被引用回数：18 パーセンタイル：83.75(Multidisciplinary Sciences)The triangular lattice antiferromagnet (TLAF) has been the standard paradigm of frustrated magnetism for several decades. The most common magnetic ordering in insulating TLAFs is the 120
structure. However, a new triple-
chiral ordering can emerge in metallic TLAFs, representing the short wavelength limit of magnetic skyrmion crystals. We report the metallic TLAF CoTaS as the first example of tetrahedral triple- magnetic ordering with the associated topological Hall effect (non-zero 
). We also present a theoretical framework that describes the emergence of this magnetic ground state, which is further supported by the electronic structure measured by angle-resolved photoemission spectroscopy. Additionally, our measurements of the inelastic neutron scattering cross section are consistent with the calculated dynamical structure factor of the tetrahedral triple- state.
Yang, D. S.*; Wu, Y.*; Kanatzidis, E. E.*; Avila, R.*; Zhou, M.*; Bai, Y.*; Chen, S.*; 関根 由莉奈; Kim, J.*; Deng, Y.*; et al.
Materials Horizons, 10(11), p.4992 - 5003, 2023/09
被引用回数：12 パーセンタイル：0.00(Chemistry, Multidisciplinary)本論文では、ハード及びソフトハイブリッド材料システムでの3Dプリントによって形成されたマイクロ流体ネットワーク、統合バルブ、およびマイクロスケール光学キュベットにより、汗成分に対してその場で分光および蛍光分析した成果を紹介する。一連の試験により、これらのマイクロキュベットシステムが汗中の銅、塩化物、グルコースの濃度と汗のpHを実験室レベルの精度と感度で評価できることが実証された。
Shangguan, Y.*; Bao, S.*; Dong, Z.-Y.*; Xi, N.*; Gao, Y.-P.*; Ma, Z.*; Wang, W.*; Qi, Z.*; Zhang, S.*; Huang, Z.*; et al.
Nature Physics, 19(12), p.1883 - 1889, 2023/09
被引用回数：19 パーセンタイル：94.23(Physics, Multidisciplinary)The magnetization of a quantum magnet can be pinned at a fraction of its saturated value by collective effects. One example of such a plateau phase is found in spin-1/2 triangular-lattice antiferromagnets. They feature strong geometrical frustration and the plateau phase therein is often interpreted as arising from an order-by-disorder mechanism driven by quantum fluctuations. Here we observe a one-third magnetization plateau under an applied magnetic field in the spin-1 antiferromagnet Na
NiBiO with a honeycomb lattice, which, with conventional magnetic interactions, would not be geometrically frustrated. Based on our elastic neutron scattering measurements, we propose the spin structure of the plateau phase to be an unusual partial spin-flop ferrimagnetic order. Our theoretical calculations indicate that bond-anisotropic Kitaev interactions are the source of frustration that produces the plateau. These results suggest that Kitaev interactions provide a different route to frustration and phases driven by quantum fluctuations in high-spin magnets.
; Bandgap narrowing, metallization, and remarkable enhancement of photoelectric activityFang, Y.*; Kong, L.*; Wang, R.*; Zhang, Z.*; Li, Z.*; Wu, Y.*; Bu, K.*; Liu, X.*; Yan, S.*; 服部 高典; et al.
Materials Today Physics (Internet), 34, p.101083_1 - 101083_7, 2023/05
被引用回数：8 パーセンタイル：76.08(Materials Science, Multidisciplinary)層状ファンデルワールスハライドは、外部圧力に対して特に敏感であるため、目的とする性質を持つ構造にチューンすることが可能となる。一方で、圧力に非常に敏感であるという特性は、同時に目的とする機能の実現に有害な相転移や格子歪みを引き起こす可能性があるためその操作は依然として困難である。この研究では、層状RhI結晶が持つ極めて弱い層間結合と高い機能可変性を観察した。5GPaという適度な圧力をかけると圧力誘起相転移が起こり、積層構造に変化が現れた。驚くべきことに、この相転移は、圧力に対してほぼ直線的なバンドギャップ減少という傾向に影響を与えなかった。また、より高い圧力では、1.3eVの赤方偏移というかなり大きな調整幅を伴う金属相が観測された。さらに、RhIのキャリア濃度は30GPaで4桁増加し、光電流は7.8GPaで5桁増加することが確認された。これらの結果は、ファンデルワールスハライドの層状構造という特異な特徴を生かした探索、調整、理解のための新たな機会を創出し、原子レベルの薄さを持つマテリアルバイデザインに基づく将来のデバイスとして有望である。
Jiang, X.*; 服部 高典; Xu, X.*; Li, M.*; Yu, C.*; Yu, D.*; Mole, R.*; 矢野 真一郎*; Chen, J.*; He, L.*; et al.
Materials Horizons, 10(3), p.977 - 982, 2023/03
被引用回数：25 パーセンタイル：93.09(Chemistry, Multidisciplinary)現在の蒸気圧縮式冷凍機に代わる環境に優しい冷凍機として、バロカロリック効果に基づく固体冷凍機が世界的に注目されている。一般に、バロカロリック効果が発現する相はいずれも常圧でも存在する。ここでは、それらの物質と違って、KPFが高圧の菱面体晶相を生成することにより、巨大なバロカロリック効果を示すことを実証した。相図は、圧力依存の熱量測定、ラマン散乱測定、中性子回折測定に基づいて構築されたものである。本研究は、巨大バロカロリー効果に、高圧相の生成という新たな手法をもたらすと期待される。
Lam, T.-N.*; Chin, H.-H.*; Zhang, X.*; Feng, R.*; Wang, H.*; Chiang, C.-Y.*; Lee, S. Y.*; 川崎 卓郎; Harjo, S.; Liaw, P. K.*; et al.
Acta Materialia, 245, p.118585_1 - 118585_9, 2023/02
被引用回数：23 パーセンタイル：89.56(Materials Science, Multidisciplinary)The present study investigates the crystallographic-texture effects on the improved fatigue resistance in the CoCrFeMnNi high-entropy alloys (HEAs) with the full-size geometry of the ASTM Standards E647-99. We exploited X-ray nano-diffraction mapping to characterize the crystal-deformation levels ahead of the crack tip after stress unloading under both constant- and tensile overloaded-fatigue conditions. The crack-tip blunting-induced much higher deformation level was concentrated surrounding the crack-tip which delays the fatigue-crack growth immediately after a tensile overload. The predominant deformation texture orientation in the Paris regime was investigated, using electron backscatter diffraction and orientation distribution function analyses. The twinning formation-driven shear deformation gave rise to the development of the Goss-type texture within the plastic deformation regime under a tensile-overloaded-fatigue condition, which was attributed to enhance the crack deflection and thus the tensile induced crack-growth-retardation period in the CoCrFeMnNi HEA.
Chong, Y.*; Gholizadeh, R.*; 都留 智仁; Zhang, R.*; 井上 耕治*; Gao, W.*; Godfrey, A.*; 光原 昌寿*; Morris, J. W. Jr.*; Minor, A. M.*; et al.
Nature Communications (Internet), 14, p.404_1 - 404_11, 2023/02
被引用回数：35 パーセンタイル：96.12(Multidisciplinary Sciences)チタンは格子間酸素によって脆化する。特に極低温では顕著な脆化挙動を示すため、チタンやその合金の製造において酸素含有量を厳しく管理する必要がある。この問題を解決するために、我々は結晶粒の微細化という構造戦略を提案した。77Kで非常に脆い粗粒の組織と比較して、Ti-0.3wt.%Oの超微細粒(UFG)組織(粒径
2.0
m)は、UFG組織特有の超高降伏強度を維持したまま均一延びを1桁上昇させることに成功した。UFG Ti-0.3wt.%Oにおけるこの特異な強度-延性相乗効果は、粒界凝集エネルギー向上に寄与する希薄な酸素の粒界偏析と優れたひずみ硬化能に寄与する
転位の活性化の複合効果によって達成された。この方法は、低温での高強度Ti-O合金の応用の可能性を高めるだけでなく、格子間固溶硬化による延性の低下を生じる他の合金系にも適用できる可能性がある。
Liu, B.*; Feng, R.*; Busch, M.*; Wang, S.*; Wu, H.*; Liu, P.*; Gu, J.*; Bahadoran, A.*; 松村 大樹; 辻 卓也; et al.
ACS Nano, 16(9), p.14121 - 14133, 2022/09
被引用回数：92 パーセンタイル：98.75(Chemistry, Multidisciplinary)Pt single-atom materials possess an ideal atom economy but suffer from limited intrinsic activity and side reaction of producing HO in catalyzing the oxygen reduction reaction (ORR). Here, we demonstrate that anchoring platinum alloys on single-atom Pt-decorated carbon (Pt- SAC) surmounts their inherent deficiencies, thereby enabling a complete four-electron ORR pathway catalysis with high efficiency and durability. PtCo@Pt-SAC demonstrates an exceptional mass and specific activities 1 order of magnitude higher than those of commercial Pt/C. They are durable throughout 50000 cycles, showing only a 10 mV decay in halfwave potential. The superior durability is attributed to the shielding effect of the Pt-SAC coating, which significantly mitigates the dissolution of PtCo cores.
Walter, H.*; Colonna, M.*; Cozma, D.*; Danielewicz, P.*; Ko, C. M.*; Kumar, R.*; 小野 章*; Tsang, M. Y. B*; Xu, J.*; Zhang, Y.-X.*; et al.
Progress in Particle and Nuclear Physics, 125, p.103962_1 - 103962_90, 2022/07
被引用回数：84 パーセンタイル：95.20(Physics, Nuclear)原子核-原子核衝突や原子核の状態方程式の研究において、反応計算モデルは重要なツールとなり、世界中で開発が進んでいる。本論文は、原子力機構のJQMD-2.0を含め、現在開発中の複数のコード開発者の協力により、これらコードを同じ条件で比較することで共通点や差異を明らかにしたプロジェクトTransport Model Evaluation Project (TMEP)を総括したものである。参加したコードはBoltzmann-Uehling-Uhlenbeck(BUU)法に基づく13のコードと、Quantum Molecular Dynamics (QMD)法に基づく12のコードであった。プロジェクトでは、Au原子核同士を衝突させてその終状態を観測する現実的な計算や、一辺が640nmの箱に核子を詰めて時間発展させる仮想的な計算を行った。その結果、BUU法コードとQMD法コードは計算原理が異なるため、計算の設定に関係なく系統的な差異が生じることが明らかになった。その一方で、同じ方法を採用するコード間の比較では、時間発展を細かく計算することでコード間の差は埋まっていき、一定の収束値を持つことが示された。この結果は今後開発される同分野のコードのベンチマークデータとして有用なものであるだけでなく、原子核基礎物理学の実験や理論研究の標準的な指針としても役に立つことが期待される。
Brumm, S.*; Gabrielli, F.*; Sanchez-Espinoza, V.*; Groudev, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; Bocanegra, R.*; Herranz, L. E.*; Berda
, M.*; et al.
Proceedings of 10th European Review Meeting on Severe Accident Research (ERMSAR 2022) (Internet), 13 Pages, 2022/05
The current HORIZON-2020 project on "Management and Uncertainties of Severe Accidents (MUSA)" aims at applying Uncertainty Quantification (UQ) in the modeling of Severe Accidents (SA), particularly in predicting the radiological source term of mitigated and unmitigated accident scenarios. Within its application part, the project is devoted to the uncertainty quantification of different severe accident codes when predicting the radiological source term of selected severe accident sequences of different nuclear power plant designs, e.g. PWR, VVER, and BWR. Key steps for this investigation are, (a) the selection of severe accident sequences for each reactor design, (b) the development of a reference input model for the specific design and SA-code, (c) the selection of a list of uncertain model parameters to be investigated, (d) the choice of an UQ-tool e.g. DAKOTA, SUSA, URANIE, etc., (e) the definition of the figures of merit for the UA-analysis, (f) the performance of the simulations with the SA-codes, and, (g) the statistical evaluation of the results using the capabilities, i.e. methods and tools offered by the UQ-tools. This paper describes the project status of the UQ of different SA codes for the selected SA sequences, and the technical challenges and lessons learnt from the preparatory and exploratory investigations performed.
Liu, M.*; Gong, W.; Zheng, R.*; Li, J.*; Zhang, Z.*; Gao, S.*; Ma, C.*; 辻 伸泰*
Acta Materialia, 226, p.117629_1 - 117629_13, 2022/03
被引用回数：76 パーセンタイル：99.45(Materials Science, Multidisciplinary)One hopeful path to realize good comprehensive mechanical properties in metallic materials is to accomplish homogeneous nanocrystalline (NC) or ultrafine grained (UFG) structure with low dislocation density. In this work, high pressure torsion deformation followed by appropriate annealing was performed on 316 stainless steel (SS). For the first time, we successfully obtained NC/UFG 316 SS having uniform microstructures with various average grain sizes ranging from 46 nm to 2.54 m and low dislocation densities. Among the series, an un-precedentedly high yield strength (2.34 GPa) was achieved at the smallest grain size of 46 nm, in which dislocation scarcity induced hardening accounting for 57% of the strength. On the other hand, exceptional strength-ductility synergy with high yield strength (900 MPa) and large uniform elongation (27%) was obtained in the fully recrystallized specimen having the grain size of 0.38 m. The high yield stress and scarcity of dislocation sources in recrystallized UFGs activated stacking faults and deformation twins nucleating from grain boundaries during straining, and their interaction with dislocations allowed for sustainable strain hardening, which also agreed with the plaston concept recently proposed. The multiple deformation modes activated, together with the effective strengthening mechanisms, were responsible for the outstanding comprehensive mechanical performance of the material.
Soba, A.*; Prudil, A.*; Zhang, J.*; Dethioux, A.*; Han, Z.*; Dostal, M.*; Matocha, V.*; Marelle, V.*; Lasnel-Payan, J.*; Kulacsy, K.*; et al.
Proceedings of TopFuel 2021 (Internet), 10 Pages, 2021/10
The NEA Expert Group on Reactor Fuel Performance (EGRFP) proposed a benchmark on fuel performance codes modeling of pellet-cladding mechanical interation (PCMI). The aim of the benchmark was to improve understanding and modeling of PCMI amongst NEA member organizations. This was achieved by comparing PCMI predictions for a number of specified cases. The results of the two hypothetical cases (1 and 2) were presented earlier. The two final cases (3 and 4) are comparison between calculations and measurements, which will be published as NEA reports. This paper focuses on Case 3, which consists of eight beginning of life (BOL) sub-cases (3a to 3h) each with different pellet designs that have undergone ramping in the Halden Reactor. The aforementioned experiments are known as the IFA-118 experiments and were performed from 1969 to 1970. The variations between cases include four different pellets dimensions (7, 14, 20 and 30 mm of height), two different gapsizes between pellet-cladding (40 and 100 microns) and three variations on pellet face geometry (flat, dishing and dishing with chamfer). Such diversity has allowed exploring the codes sensitivity to these individual factors.
Zhang, P.*; Tang, X.*; Wang, Y.*; Wang, X.*; Gao, D.*; Li, Y.*; Zheng, H.*; Wang, Y.*; Wang, X.*; Fu, R.*; et al.
Journal of the American Chemical Society, 142(41), p.17662 - 17669, 2020/10
被引用回数：33 パーセンタイル：78.63(Chemistry, Multidisciplinary)固体トポケミカル重合(SSTP)は機能的な結晶性高分子材料を合成するための有望な方法であるが、溶液中で起こるさまざまな反応とは対照的に、非常に限られたタイプのSSTP反応しか報告されていない。ディールス・アルダー(DA)および脱水素-DA(DDA)反応は、溶液中で六員環を作るための教科書的反応であるが、固相合成ではほとんど見られない。本研究では、固体の1,4-ジフェニルブタジイン(DPB)を10-20GPaに加圧することで、フェニル基がジエノフィルとして、DDA反応することを複数の最先端の手法を用いて明らかにした。臨界圧力での結晶構造は、この反応が「距離選択的」であることを示している。つまり、フェニルとフェニルエチニル間の距離3.2
は、DDA反応は起こせるが、他のDDAや1,4-付加反応で結合を形成するには長すぎる。回収された試料は結晶性の肘掛け椅子型のグラファイトナノリボンであるため、今回の研究結果は、原子スケールの制御で結晶質炭素材料を合成するための新しい道を開く。
