Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakanoya, Takamitsu; Yoshimoto, Masahiro; Saha, P. K.; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.937 - 941, 2023/11
In the J-PARC 3GeV Rapid Cycling Synchrotron (RCS), the 400MeV H
beam is changed to H+ beam by a charge exchange foil and accelerated to 3GeV. So far, RCS had used two types of charge exchange foil. One is the HBC (Hybrid Boron mixed Carbon) foil and the other is the Kaneka GTF (Graphene Thin Film). HBC foil is a patented deposition method developed at KEK for the stable production of thick carbon foil. Initially, the RCS used HBC foil produced atKEK. However, in 2017, JAEA had started HBC foil production and has been using it since then. Recently, we have succeeded in depositing thick pure carbon foil, which had been considered difficult to produce by the arc deposition method. As a new challenge, this pure carbon foil was used in the user operation from March 2023. As a result, Pure carbon foils showed less deformation and more stable charge exchange performance than HBC and GTF.
Nakanoya, Takamitsu; Yoshimoto, Masahiro; Saha, P. K.; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.629 - 633, 2023/01
In the J-PARC 3-GeV Rapid Cycling Synchrotron (RCS), a 400 MeV H- beam injected from the linac is exchange to an H+ beam by a charge exchange foil and accelerated to 3 GeV. The charge exchange foils mainly used in the RCS are HBC foil (Hybrid Boron mixed Carbon stripper foil), which are made by adding a small amount of boron to carbon rods and using them as electrodes by the arc deposition method. Since 2018, foils produced by JAEA have been used for user operation. So far, no major problems have occurred due to the foils. Meanwhile, the beam power of the RCS has been gradually increased from 500 kW to 830 kW since 2018. As beam power increases, the foil issues were identified to achieve the RCS design power of 1 MW. In this paper, we will report on the recent foil usage status and issue in the user operation.
Sakakibara, Hiroshi; Aoki, Nobuhiro; Muto, Masahiro; Otabe, Jun; Takahashi, Kenji*; Fujita, Naoyuki*; Hiyama, Kazuhiko*; Suzuki, Hirokazu*; Kamogawa, Toshiyuki*; Yokosuka, Toru*; et al.
JAEA-Technology 2020-020, 73 Pages, 2021/03
JAEA-Technology-2020-020.pdf:8.26MB
The decommissioning is currently in progress at the prototype fast breeder reactor Monju. Fuel assemblies will be taken out of its core for the first step of the great task. Fuel assemblies stand on their own spike plugged into a socket on the core support plate and support with adjacent assemblies through their housing pads each other, resulting in steady core structure. For this reason, some substitutive assemblies are necessary for the purpose of discharging the fuel assemblies of the core. Monju side commissioned, therefore, Plutonium Fuel Development Center to manufacture the substitutive assemblies and the Center accepted it. This report gives descriptions of design, manufacture, and shipment in regard to the substitutive assemblies.
Nakanoya, Takamitsu; Yoshimoto, Masahiro; Yamazaki, Yoshio; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.545 - 549, 2019/07
In the 3 GeV Rapid Cycling Synchrotron (RCS) of the Japan Proton Accelerator Research complex (J-PARC), we adopted the carbon stripper foil for the multi-turn H- charge exchange injection. The charge exchange foil which use in RCS is fabricated by the arc discharge method with the boron doped carbon electrode. The foil fabricated this method is called HBC foil (Hybrid Boron mixed Carbon stripper foil). HBC foil had been developed at KEK. It has high durability for the beam irradiation damage. In past days, the foil fabrication process was conducted in KEK Tsukuba-site and the foil preparation process was conducted in JAEA Tokai-site. In 2017, the foil deposition apparatus has been relocated from KEK to JAEA, and we started both processes in Tokai-site. We carried out the offline beam irradiation test for the new HBC foil which fabricated in JAEA, and we confirmed that its performance is equivalent to the original HBC foil. Next we tested a new HBC foil with actual beam in RCS and we confirmed it could withstand 1 week beam irradiation. After that, we started user operation with the new HBC foil in 2018. So far we accomplished stable user operation for one year by using the new HBC foil only.
Tobita, Norimitsu; Yoshimoto, Masahiro; Takeda, Osamu; Saeki, Riuji; Yamazaki, Yoshio; Kinsho, Michikazu; Muto, Masayoshi*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1350 - 1354, 2015/09
no abstracts in English
Sato, Takeshi; Muto, Shigeo; Akiyama, Kiyomitsu; Aoki, Kazufumi; Okamoto, Akiko; Kawakami, Takeshi; Kume, Nobuhide; Nakanishi, Chika; Koie, Masahiro; Kawamata, Hiroyuki; et al.
JAEA-Review 2014-048, 69 Pages, 2015/02
JAEA-Review-2014-048.pdf:13.91MB
JAEA was assigned as a designated public institution under the Disaster Countermeasures Basic Act and under the Armed Attack Situations Response Act. Based on these Acts, the JAEA has the responsibility of providing technical support to the national government and/or local governments in case of disaster responses or response in the event of a military attack, etc. In order to fulfill the tasks, the JAEA has established the Emergency Action Plan and the Civil Protection Action Plan. In case of a nuclear emergency, NEAT dispatches specialists of JAEA, supplies the national government and local governments with emergency equipment and materials, and gives technical advice and information. In normal time, NEAT provides various exercises and training courses concerning nuclear disaster prevention to those personnel taking an active part in emergency response institutions of the national and local governments, police, fire fighters, self-defense forces, etc. in addition to the JAEA itself. The NEAT also researches nuclear disaster preparedness and response, and cooperates with international organizations. In the FY2013, the NEAT accomplished the following tasks: (1) Technical support activities as a designated public institution in cooperation with the national and local governments, etc. (2) Human resource development, exercise and training of nuclear emergency response personnel for the national and local governments, etc. (3) Researches on nuclear disaster preparedness and response, and sending useful information (4) International contributions to Asian countries on nuclear disaster preparedness and response in collaboration with the international organizations
Tobita, Norimitsu; Yoshimoto, Masahiro; Yamazaki, Yoshio; Saeki, Riuji; Okabe, Kota; Kinsho, Michikazu; Takeda, Osamu*; Muto, Masayoshi*
Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.915 - 919, 2014/06
The charge conversion foil used with a J-PARC 3GeV synchrotron (RCS: Rapid Cycling Synchrotron) is a thin film made from carbon about 1 micrometer thick, and it radioactivates it by continuing being irradiated with a beam. Moreover, generally it is thought that degradation progresses and foil itself breaks easily. However, when dealing with the foil after irradiation, the measure against the danger of the contamination and the contamination in the living body by foil dispersing is one of the subjects. So, in RCS, the foil exchange booth for collecting the radioactivated foil safely and certainly was installed. Even when dispersing foil temporarily, the radioactivated foil can be shut up only in Booth and a worker's contamination and contamination of work area could be prevented. Moreover, when it sees from a viewpoint of the performance gain of foil, analysis and observation of the collected foil are one of the important issues. Then, in order to observe the radioactivated foil after beam irradiation, the transparent protective case which can be sealed with a foil frame simple substance was developed. In this announcement, the equipment developed in order to collect the charge conversion foil after beam irradiation, and the established technique are announced in detail.
Saeki, Riuji; Yoshimoto, Masahiro; Yamazaki, Yoshio; Tobita, Norimitsu; Okabe, Kota; Kinsho, Michikazu; Takeda, Osamu*; Muto, Masayoshi*
Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.523 - 526, 2014/06
RCS has loaded with the foil of 15 sheets including a reserve into equipment so that it can exchange in a short time, when foil is damaged also in a beam operating period. It is difficult for foil to be made of a thin film about 1 micrometer thick, and to treat as it is. Then, foil is fixed to the frame which stuck the SiC fiber, and foil is not touched, but only a frame is held, and it enabled it to operate it. The following preparations are needed as new foil exchange work. (1) Exfoliation and recovery of foil which have been vapor-deposited to glass substrate. (2) Dryness and logging of exfoliative foil. (3) Preparation of SiC wire, and attachment on frame. (4) Fix foil to a frame. (5) Although charge on a magazine-rack was performed manually altogether until now, there were many work man days, and the quality of the prepared foil had variation. Then, equipment required in order to secure reproducibility was developed. The technique for working efficiently simultaneously was established. In this announcement, the technique established until now and the developed jigs are announced in detail.
Sato, Takeshi; Muto, Shigeo; Okuno, Hiroshi; Katagiri, Hiromi; Akiyama, Kiyomitsu; Okamoto, Akiko; Koie, Masahiro; Ikeda, Takeshi; Nemotochi, Toshimasa; Saito, Toru; et al.
JAEA-Review 2013-046, 65 Pages, 2014/02
JAEA-Review-2013-046.pdf:11.18MB
When a nuclear emergency occurs in Japan, the Japan Atomic Energy Agency (JAEA) has the responsibility of providing technical support to the National government, local governments, police, fire stations and nuclear operators etc., because the JAEA has been designated as the Designated Public Institution under the Basic Act on Disaster Control Measures and the Act on Response to Armed Attack Situations, etc.. The Nuclear Emergency Assistance and Training Center (NEAT) of JAEA provides a comprehensive range of technical support activities to an Off-Site Center in case of a nuclear emergency. Specifically, NEAT gives technical advice and information, dispatches specialists as required, and supplies the National Government and local governments with emergency equipments and materials. NEAT provides various exercise and training courses concerning nuclear disaster prevention to those personnel taking an active part in emergency response organizations at normal times. The tasks of NEAT, with its past experiences as a designated public institution including the responses to TEPCO's Fukushima Accident, have been shifted to technical supports to the national government for strengthening its abilities to emergency responses; the NEAT therefore focused on maintenance and operation of its functions, and strengthening its response abilities in cooperation with the national government. This annual report summarized these activities of JAEA/NEAT in the fiscal year 2012.
Sato, Sohei; Yamamoto, Kazuya; Muto, Shigeo; Fukumoto, Masahiro; Katagiri, Hiromi
JAEA-Review 2011-049, 77 Pages, 2012/01
JAEA-Review-2011-049.pdf:13.24MB
The Tohoku District-off the Pacific Ocean Earthquake occurred at 14:46 on March 11, 2011. Tsunami caused by the earthquake attacked the Fukushima Dai-ichi and Fukushima Dai-ni Nuclear Power Stations of Tokyo Electric Power Company and nuclear accidents involving release of radioactive material occurred. Since the earthquake, Nuclear Emergency Assistance and Training Center (NEAT) has served as a base of support activities conducted by Japan Atomic Energy Agency (JAEA). After nearly half a year has passed since the occurrence of the accident, we compiled the support activities of NEAT. NEAT's lessons learned and recommendations based on the experiences of support activities to the accident should be very helpful in considering the structure of nuclear emergency preparedness and response. We summarized them in this time. We hope that this report helps further developing nuclear emergency preparedness and response in the future.
Nishimori, Nobuyuki; Nagai, Ryoji; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Muto, Toshiya*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; et al.
Proceedings of 25th International Linear Accelerator Conference (LINAC 2010) (CD-ROM), p.995 - 997, 2010/09
Nagai, Ryoji; Nishimori, Nobuyuki; Hajima, Ryoichi; Muto, Toshiya*; Yamamoto, Masahiro*; Miyajima, Tsukasa*; Honda, Yosuke*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; et al.
Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.806 - 808, 2010/08
A 500-kV, 10-mA photocathode DC gun which is designed for next-generation light- sources based on energy-recovery linac has been developed in a collaboration effort of JAEA, KEK, Hiroshima University and Nagoya University. We have utilized a segmented cylindrical ceramic insulator and guard-ring electrodes to prevent any damage to the insulator from electrons emitted by the support-rod electrode. The 500-kV gun was successfully conditioned up to a voltage of 550 kV and a long-time holding test for 8 h was demonstrated at an acceleration voltage of 500 kV. The cathode electrode, anode electrode, and beam line apparatuses are now under fabrication and beam tests of the gun will be started soon.
Nishimori, Nobuyuki; Nagai, Ryoji; Hajima, Ryoichi; Yamamoto, Masahiro*; Miyajima, Tsukasa*; Honda, Yosuke*; Muto, Toshiya*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; et al.
Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.802 - 805, 2010/08
no abstracts in English
Nagai, Ryoji; Hajima, Ryoichi; Nishimori, Nobuyuki; Muto, Toshiya*; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Kuriki, Masao*; Iijima, Hokuto*; Kuwahara, Makoto*; et al.
Kasokuki, 7(2), p.88 - 94, 2010/07
A 500-kV, 10-mA photocathode DC gun which is designed for next-generation light-sources based on energy-recovery linac has been developed in a collaboration effort of JAEA, KEK, Hiroshima University and Nagoya University. We have utilized a segmented cylindrical ceramic insulator and guard-ring electrodes to prevent any damage to the insulator from electrons emitted by the support-rod electrode. The 500-kV gun was successfully conditioned up to a voltage of 550 kV and a long-time holding test for 8 h was demonstrated at an acceleration voltage of 500 kV. The 500-kV gun consists of a Cockcroft-Walton generator, a segmented cylindrical ceramic insulator, guard-ring electrodes, a support-rod electrode, a vacuum chamber, and a pressurized insulating gas tank. The cathode electrode, anode electrode, and beam line apparatuses are now under fabrication and beam tests of the gun will be started soon.
Nagai, Ryoji; Hajima, Ryoichi; Nishimori, Nobuyuki; Muto, Toshiya*; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Kuriki, Masao*; Iijima, Hokuto*; Kuwahara, Makoto*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2341 - 2343, 2010/05
A 500-kV, 10-mA photocathode DC gun has been developed in a collaboration effort of JAEA, KEK, Hiroshima University and Nagoya University. We have utilized a segmented cylindrical ceramic insulator and guard-ring electrodes to prevent any damage to the insulator from electrons emitted by the support-rod electrode. The high-voltage test of the gun has been successfully done with up to 550 kV. The cathode electrode, anode electrode, and beam line apparatuses are now under fabrication. A beam test of the gun will be started soon. The high-voltage test and up-to-date status of the gun development will be presented in detail.
Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05
Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.
Nishimori, Nobuyuki; Nagai, Ryoji; Iijima, Hokuto; Hajima, Ryoichi; Yamamoto, Masahiro*; Muto, Toshiya*; Miyajima, Tsukasa*; Honda, Yosuke*; Kuriki, Masao*; Kuwahara, Makoto*; et al.
Proceedings of 6th Annual Meeting of Particle Accelerator Society of Japan (CD-ROM), p.872 - 874, 2010/03
no abstracts in English
Nagai, Ryoji; Hajima, Ryoichi; Nishimori, Nobuyuki; Iijima, Hokuto; Muto, Toshiya*; Honda, Yosuke*; Miyajima, Tsukasa*; Yamamoto, Masahiro*; Kuriki, Masao*; Kuwahara, Makoto*; et al.
Proceedings of 6th Annual Meeting of Particle Accelerator Society of Japan (CD-ROM), p.863 - 865, 2010/03
A 500-kV, 10-mA photocathode DC gun has been designed and is now under fabrication by the collaboration efforts of JAEA, KEK, Hiroshima University and Nagoya University. We have adopted a multiple-stacked cylindrical ceramic insulator, because this type of ceramic insulator has shown good stability and robustness at the 250-kV JAEA FEL gun and the 200-kV Nagoya polarized gun. The Cockcroft-Walton voltage multiplier, the ceramic insulator, the vacuum chambers has been fabricated and a high-voltage test will be successfully achieved soon. Up-to-date status of the gun development is presented in detail.
Nagai, Ryoji; Hajima, Ryoichi; Nishimori, Nobuyuki; Muto, Toshiya*; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; et al.
Review of Scientific Instruments, 81(3), p.033304_1 - 033304_5, 2010/03
Times Cited Count：23 Percentile：68.01(Instruments & Instrumentation)A high-voltage dc photocathode electron gun was successfully conditioned up to a voltage of 550 kV and a long-time holding test for 8 hours was demonstrated at an acceleration voltage of 500 kV. The dc photocathode electron gun is designed for future light sources based on energy-recovery linac and consists of a Cockcroft-Walton generator, a segmented cylindrical ceramic insulator, guard-ring electrodes, a support-rod electrode, a vacuum chamber and a pressurized insulating gas tank. The segmented cylindrical ceramic insulator and the guard-ring electrodes were utilized to prevent any damage to the insulator from electrons emitted by the support-rod electrode.
Nishimori, Nobuyuki; Nagai, Ryoji; Iijima, Hokuto; Honda, Yosuke*; Muto, Toshiya*; Kuriki, Masao*; Yamamoto, Masahiro*; Okumi, Shoji*; Nakanishi, Tsutomu*; Hajima, Ryoichi
AIP Conference Proceedings 1149, p.1094 - 1098, 2009/08
We have constructed a prototype DC photoemission electron gun for a future energy recovery linac (ERL) based light source in Japan. The prototype gun is operated at up to 250 kV. A diagnostic beam line for emittance and bunch length measurements will be constructed soon. A 83.3 MHz Ti:sapphire laser with 500 mW average power and 2 ps pulse length is used to illuminate a GaAs photocathode. The prototype gun is designed to deliver up to 50 mA beam current. We have also designed a new 500 kV DC gun which is capable of producing up to 10 mA electron current with emittance lower than 1 mm-mrad. The high voltage terminal will be isolated by ten ceramics stacked in series. The new gun will satisfy performance required as an injector for the compact ERL, which will be constructed at KEK as a prototype of the future ERL light source. In this talk, our current status of the gun development has been presented.
