検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 8 件中 1件目~8件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Development of multi-purpose MW gyrotrons for fusion devices

南 龍太郎*; 假家 強*; 今井 剛*; 沼倉 友晴*; 遠藤 洋一*; 中林 英隆*; 江口 濯*; 下妻 隆*; 久保 伸*; 吉村 泰夫*; et al.

Nuclear Fusion, 53(6), p.063003_1 - 063003_7, 2013/06

The latest development achievements in University of Tsukuba of over-1 MW power level gyrotrons required in the present-day fusion devices, GAMMA 10, LHD, QUEST, Heliotron J and NSTX are presented. The obtained maximum outputs are 1.9 MW for 0.1 s on the 77 GHz LHD tube and 1.2 MW for 1 ms on the 28 GHz GAMMA 10 one, which are new records in these frequency ranges. In long pulse operation, 0.3 MW for 40 min at 77 GHz and 0.54 MW for 2 s at 28 GHz were achieved. A new program of 154 GHz 1 MW development has started for high density plasma heating in LHD. On the first 154 GHz tube, 1.0 MW for 1 s was achieved. As a next activity of 28 GHz gyrotron, we have already carried out the development of over-1.5 MW gyrotron and design study of the 28 GHz cavity and mode converter has shown the possibility of 2 MW level output and CW operation with several hundred kW. Besides, a new design study of dual frequency gyrotron at 28 GHz and 35 GHz has been started, which indicates the practicability of the multi-purpose gyrotron.

論文

Development of multi-purpose MW gyrotrons for fusion devices

南 龍太郎*; 假家 強*; 今井 剛*; 沼倉 友晴*; 遠藤 洋一*; 中林 英隆*; 江口 濯*; 下妻 隆*; 久保 伸*; 吉村 泰夫*; et al.

Nuclear Fusion, 53(6), p.063003_1 - 063003_7, 2013/06

 被引用回数:12 パーセンタイル:47.21(Physics, Fluids & Plasmas)

The latest development achievements in the University of Tsukuba of over-1 MW power level gyrotrons required in present-day fusion devices, GAMMA 10, Large Helical Device (LHD), QUEST, Heliotron J and NSTX, are presented. The obtained maximum outputs are 1.9 MW for 0.1 s on the 77 GHz LHD tube and 1.2 MW for 1ms on the 28 GHz GAMMA10 one, which are new records in these frequency ranges. In long-pulse operation, 0.3 MW for 40 min at 77 GHz and 0.54 MW for 2 s at 28 GHz are achieved. A new programme of 154 GHz 1 MW development has started for high-density plasma heating in LHD. On the first 154 GHz tube, 1.0 MW for 1 s is achieved. As a next activity of the 28 GHz gyrotron, an over-1.5 MW gyrotron is designed and fabricated to study the multi-MW oscillation. The possibility of 0.4 MW continuous wave and 2 MW level output in operations of a few seconds, after the improvements of output window and mode converter, is shown. Moreover, a new design study of dual-frequency gyrotron at 28 and 35 GHz has started, which indicates the practicability of the multi-purpose gyrotron.

論文

Measurement of deuteron induced thick target neutron yields at 9 MeV

執行 信寛*; 日高 浩介*; 平林 慶一*; 中村 泰博*; 森口 大輔*; 隈部 正洋*; 平野 秀峻*; 平山 嵩祐*; 内藤 有紀*; 本岡 親英*; et al.

Journal of the Korean Physical Society, 59(2), p.1725 - 1728, 2011/08

The double differential thick target neutron yields from 9 MeV deuteron incidences were measured at the Kyushu University Tandem Accelerator Laboratory. A copper and a titanium foils which are thick enough for a deuteron to stop in the foils were placed at the center of a vacuum chamber. An NE213 liquid organic scintillator was employed to detect neutrons emitted from targets and placed at 9 directions from 0$$^{circ}$$ to 140$$^{circ}$$. To consider the contribution of scattered neutrons from the floor, we also measured neutron yields with an iron shadow bar located in front of the scintillator. Because incident deuteron beam was not pulsed and the Time-of-Flight method was not applied, the energy spectrum was derived from unfolding the light output spectrum using the FORIST code. The detection efficiency was calculated with the SCINFUL-QMD code. The experimental results were compared with the calculation data of the TALYS code, and it turned out that the calculation data does not reproduce the experimental ones satisfactorily.

報告書

冷減速材システム試験装置による実験結果; システム特性と技術課題

麻生 智一; 神永 雅紀; 羽賀 勝洋; 木下 秀孝; 高橋 才雄*; 日野 竜太郎

JAERI-Tech 2002-096, 76 Pages, 2002/12

JAERI-Tech-2002-096.pdf:7.2MB

日本原子力研究所と高エネルギー加速器研究機構が共同して開発を進めているメガワット規模の核破砕ターゲットシステムでは、ターゲットで発生した中性子は液体水素減速材を用いて適切なエネルギーレベルに選別される。このとき、液体水素は温度上昇を抑制するために強制循環される。液体水素減速材の運転では、加速器ビームのトリップや冷減速材システムにおける異常時に、液体水素循環系を確実に制御あるいは安全に停止させる安全保護システムを確立することが必須である。そこで、システム設計及び安全評価のための技術データの取得を目的に、液体水素の代わりに液体窒素(最高1.5MPa,最低77K)を用いた冷減速材システム試験装置を設計・製作した。この試験装置を用い、システム動特性を明らかにするため極低温システムの運転制御性実験を行った。本報は冷減速材システム試験装置の運転実験を行った結果と実機液体水素ループの構築のための技術的な課題についてまとめたものである。

論文

Present status of spallation neutron source development; JAERI/KEK joint project in Japan

神永 雅紀; 羽賀 勝洋; 麻生 智一; 木下 秀孝; 粉川 広行; 石倉 修一*; 寺田 敦彦*; 小林 薫*; 安達 潤一*; 寺奥 拓史*; et al.

Proceedings of American Nuclear Society Conference "Nuclear Applications in the New Millennium" (AccApp-ADTTA '01) (CD-ROM), 9 Pages, 2002/00

原研とKEKは大強度陽子加速器計画の下で中性子散乱実験施設の建設計画を進めている。核破砕中性子源としては、1MWの陽子ビーム入射を想定したクロスフロー型水銀ターゲットの設計検討を実施している。本報では、水銀ターゲット熱流動設計を中心に中性子散乱実験施設建家設計の現状,水銀熱伝達試験結果及びターゲット容器の遠隔操作実証試験装置について報告する。水銀ターゲットの熱流動解析では、陽子ビームプロファイルとしてガウス分布を想定した。入口水銀温度50$$^{circ}C$$,入口平均流速1.0m/s,内部総発熱量約0.4MWの条件で解析を行い、水銀最高温度121.5$$^{circ}C$$,容器最高温度232$$^{circ}C$$という結果を得て、熱流動的には成立することを明らかにした。また、解析で用いた熱伝達モデルは、水銀熱伝達実験結果に基づき検証した。さらに、本施設の要となるターゲットリモートハンドリング機器については、概念設計結果を基に実規模試験に着手し、所期の性能を発揮することを確認した。

報告書

Experience with hydrogen addition water chemistry in the Fugen nuclear power station

北端 琢也*; 上田 司穂*; 高橋 秀孝; Kanesaki, Takuno*; 岩井 正樹*

PNC TN3410 88-011, 22 Pages, 1988/04

PNC-TN3410-88-011.pdf:0.43MB

None

口頭

Cu, Tiに対する9MeV重陽子中性子収量測定

執行 信寛*; 日高 浩介*; 平林 慶一*; 中村 泰博*; 森口 大輔*; 平野 秀峻*; 平山 嵩祐*; 内藤 有紀*; 渡辺 幸信*; 相良 建至*; et al.

no journal, , 

9MeV重陽子を厚い銅とチタンに入射したときの中性子収量測定を行った。中性子検出器に直径5.08cm,厚さ5.08cmのNE213シンチレータを使用し、発光量をアンフォールディングすることにより中性子エネルギースペクトルを導出した。その結果、銅の場合、中性子エネルギーが9MeV以上の領域で15$$^{circ}$$方向の収量が0$$^{circ}$$方向の収量を上回ることがわかった。また、チタンの場合は中性子のエネルギーが8MeVから12MeVの範囲で同様の傾向が見られた。

口頭

Cuに対する9MeV重陽子入射中性子生成量の測定

平林 慶一*; 平野 秀峻*; 日高 浩介*; 森口 大輔*; 中村 泰博*; 執行 信寛*; 平山 嵩祐*; 内藤 有紀*; 渡辺 幸信*; 高橋 博樹; et al.

no journal, , 

IFMIF/EVEDA加速器では、9MeV重陽子入射加速器が考えられており、ターゲットやビームダンプの放射線安全設計・審査に向けて精度の高い核データが必要とされているが、現状では実験データが乏しいため、計算コードの精度検証が十分にできていない。そこで本研究では、タンデム加速器により9MeVに加速した重陽子を厚いターゲットに入射し、ターゲット中で重陽子が止まるまでの(d,xn)反応による中性子生成量の測定,解析を行い、TALYSコードによる計算値との比較を行った。実験で得られた結果を元に、中性子検出器の応答関数を求めた。TALYSコードによる計算結果と比較を行った結果、TALYSの計算値は絶対値に差はあるが、傾向は再現していることがわかった。

8 件中 1件目~8件目を表示
  • 1