Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Lin, Z. M.*; Liu, B. X.*; Ming, K. S.*; 徐 平光; Yin, F. X.*; Zheng, S. J.*
Scripta Materialia, 263, p.116692_1 - 116692_7, 2025/07
被引用回数：0 パーセンタイル：0.00(Nanoscience & Nanotechnology)Complementary layer thickness effects on strength and plasticity in Q235 and SUS304 steels provide a novel strategy to realize high strength and high plasticity of heterogeneous Q235/SUS304 multilayered steel. In this work, the tensile deformation behaviors and fracture characteristics of vacuum hot-rolled Q235/SUS304 multilayered steel with various layer thicknesses ranging from 223 
m to 5 m were deeply investigated. The tensile strength improved with the reduction of layer thickness, and the uniform elongation were first increasing and then decreasing with the decrease of layer thickness, and the peak value appeared at the layer thickness of 20 m. Interestingly, the fracture elongation forms a high plateau value within the 10
20 m range. Further analysis reveals that the severe strain localization in the brittle SUS304 thin layers is delayed by the ductile Q235 layers, which is mainly attributed to the different texture evolution and dislocation configuration characteristics during tensile deformation.
Hu, F.-F.*; Qin, T.-Y.*; Ao, N.*; 徐 平光; Su, Y. H.; Parker, J. D.*; 篠原 武尚; 菖蒲 敬久; Kang, G.-Z.*; Ren, M.-M.; et al.
Journal of Traffic and Transportation Engineering, 25(2), p.75 - 93, 2025/04
To accurately predict the remaining lifetime of surface-strengthened railway axles, a damage tolerance method considering three-dimensional (3D) residual stresses was proposed. By taking the induction-hardened carbon steel S38C axle as an example, two-dimensional (2D) distribution characterization of residual strain and 3D residual stress measurement were performed through comprehensive application of the neutron Bragg-edge transmission imaging and angle-dispersive neutron diffraction experiments. A numerical method was employed to implant the 3D residual stress into the axle model, and the remaining lifetime of the full-scale axle was studied by coupling the measured load spectrum, press-fit loads, and residual stresses. Experimental results shows that, both axial and hoop directions present a compressive residual strain gradient layer of about 3 mm, with a maximum compressive residual strain of up to -4500 
in the surface layer, yet a maximum tensile strain of up to 1000 in the core. The maximum axial and hoop compressive stresses of the axle are about -500 MPa and -303 MPa respectively, while radial stresses overall fluctuate in the zero mean stress range. At depths beyond 4.5 mm from the surface layer, all three components are tensile stresses. The axle surface layer is subjected to compressive residual stresses, and crack propagation does not occur if the crack depth is less than 4.5 mm. Nevertheless, cracks propagate accelerates when the crack depth is greater than 4.5 mm. Different crack propagation depth thresholds lead to a larger calculated remaining lifetime for the residual stress-free condition than for the case where 3D residual stresses are taken into account. However, the axle remaining service mileage of the axle of 227000 Km under the most conservative conditions exceeds 3.5 non-destructive inspection (NDI) cycles, with a large safety margin. The experimental results can provide a scientific reference for the development and optimization of NDI cycles for surface-strengthened railway axles.
Song, Y.*; Xu, S.*; 佐藤 駿介*; Lee, I.*; Xu, X.*; 大森 俊洋*; 長迫 実*; 川崎 卓郎; 鬼柳 亮嗣; Harjo, S.; et al.
Nature, 638, p.965 - 971, 2025/02
被引用回数：2 パーセンタイル：88.78(Multidisciplinary Sciences)In advanced applications like aerospace and space exploration, materials must balance lightness, functionality, and extreme thermal fluctuation resistance. Shape-memory alloys show promise with strength, toughness, and substantial strain recovery due to superelasticity, but maintaining low mass and effective operation at cryogenic temperatures is challenging. We hereby introduce a novel shape-memory alloy that adheres to these stringent criteria. Predominantly composed of Ti and Al with a chemical composition of Ti
Al
Cr
, this alloy 25 is characterized by a low density (4.36
10
kg/m) and a high specific strength (18510 Pa
m/kg) at room temperature, while exhibiting excellent superelasticity. The superelasticity, owing to a reversible stress-induced phase transformation from an ordered body-centered cubic parent phase to an ordered orthorhombic martensite, allows for a recoverable strain exceeding 7%. Remarkably, this functionality persists across a broad range of temperatures, from deep cryogenic 4.2 K to above room temperature, arising from an unconventional temperature dependence of transformation stresses. Below a certain threshold during cooling, the critical transformation stress inversely correlates with temperature. We interpret this behavior from the perspective of a temperature-dependent anomalous lattice instability of the parent phase. This alloy holds potential in everyday appliances requiring flexible strain accommodations, as well as components designed for extreme environmental conditions such as deep space and liquefied gases.
Xu, J.*; Lang, P.*; Liang, S.*; Zhang, J.*; Fei, Y.*; Wang, Y.*; Gao, D.*; 服部 高典; 阿部 淳*; Dong, X.*; et al.
Journal of Physical Chemistry Letters (Internet), p.2445 - 2451, 2025/00
被引用回数：0 パーセンタイル：0.00(Chemistry, Physical)アルダー-エン反応は、アルケンとアリル水素との化学反応であり、C-C結合を構築する効率的な方法である。従来、この反応には触媒、高温、あるいは光触媒が必要であった。本研究では、触媒を用いずに室温下で加圧することで成功した1-ヘキセンのアルダー-エン反応を報告する。1-ヘキセンは4.3GPaで結晶化し、18GPaで重合してオレフィンを形成する。ガスクロマトグラフィー-質量分析法により、1-ヘキセンが高圧下でのアルダー-エン反応により二量体を生成することを発見した。その場中性子回折から、この反応過程はトポケミカル則に従わないことがわかった。理論計算により、1つのC-H 
結合と2つのアルケン
結合を含む6員環遷移状態が示され、そのエネルギーは20GPaまで圧縮すると明らかに減少した。本研究は、触媒を用いずに室温でアルダー-エン反応を実現する新規かつ有望な方法を提供し、この重要な反応の応用を拡大するものである。
伊東 達矢; Xu, S.*; Xu, X.*; 大森 俊洋*; 貝沼 亮介*
Shape Memory and Superelasticity, 9 Pages, 2025/00
The microstructure, crystal structures, cold workability, and martensitic transformation temperatures of several Cu
Mn
Al
(40 
55; 10 
13; at%) alloys were analyzed. For the first time, martensitic transformation was revealed Mn-rich Cu-Mn-Al alloys. The surface relief of the martensite phase reversibly appeared and disappeared during cooling and heating, along with small thermal hysteresis, implying a thermoelastic transformation. The crystal structures of the parent and martensite phases are B2 and 2M(BCT), respectively, with c
Mn
Al
(at%) sample. This alloy demonstrates moderate cold workability and cost-effectiveness, exhibiting potential as an alternative for conventional shape memory alloys in various applications.
Liu, P.-F.*; Li, X.*; Li, J.*; Zhu, J.*; Tong, Z.*; 古府 麻衣子*; 楡井 真実; Xu, J.*; Yin, W.*; Wang, F.*; et al.
National Science Review, 11(12), p.nwae216_1 - nwae216_10, 2024/12
被引用回数：12 パーセンタイル：91.22(Multidisciplinary Sciences)Crystalline solids exhibiting inherently low lattice thermal conductivity (
) are of great importance in applications such as thermoelectrics and thermal barrier coatings. However, cannot be arbitrarily low and is limited by the minimum thermal conductivity related to phonon dispersions. In this work, we report the liquid-like thermal transport in a well-ordered crystalline CsAg
Te
, which exhibits an extremely low value of 0.18 Wm
K. On the basis of first-principles calculations and inelastic neutron scattering measurements, we find that there are lots of low-lying optical phonon modes at 3.1 meV hosting the avoided-crossing behavior with acoustic phonons. These strongly localized modes are accompanied by weakly bound rattling Ag atoms with thermally induced large amplitudes of vibrations. Using the two-channel model, we demonstrate that coupling of the particle-like phonon modes and the heat-carrying wave-like phonons is essential for understanding the low , which is heavily deviated from the 
temperature dependence of the standard Peierls theory. In addition, our analysis indicates that the soft structural framework with liquid-like motions of the fluctuating Ag atoms is the underlying cause that leads to the suppression of the heat conduction in CsAgTe. These factors synergistically account for the ultralow value. Our results demonstrate that the liquid-like heat transfer could indeed exist in a well-ordered crystal.
SR study on the noncentrosymmetric superconductor NbGe
Jiao, J. C.*; Chen, K. W.*; Hillier, A. D.*; 伊藤 孝; 髭本 亘; Li, Z.*; Lv, B.*; Xu, Z.-A.*; Shu, L.*
Physical Review B, 110(21), p.214516_1 - 214516_9, 2024/12
被引用回数：0 パーセンタイル：0.00(Materials Science, Multidisciplinary)We report on a muon spin relaxation (SR) study on the polycrystalline noncentrosymmetric superconductor NbGe with superconducting transition temperature 
= 2.0-2.1 K. The zero-field SR experiment indicates the absence of a spontaneous magnetic field in the superconducting state, showing the preservation of time-reversal symmetry in the superconducting state. The transverse-field SR experiment is performed to map the phase diagram of NbGe, from which clear evidence of both type-I and type-II superconductivities is obtained. More importantly, we clearly delineate the region in the phase diagram where type-I and type-II superconductivities coexist.
Zheng, X.-G.*; 山内 一宏*; 萩原 雅人; 西堀 英治*; 河江 達也*; 渡邊 功雄*; 内山 智貴*; Chen, Y.*; Xu, C.-N.*
Nature Communications (Internet), 15, p.9989_1 - 9989_12, 2024/11
被引用回数：0 パーセンタイル：0.00(Multidisciplinary Sciences)Like the crystallization of water to ice, magnetic transition occurs at a critical temperature after the slowing down of dynamically fluctuating short-range correlated spins. Here, we report a unique type of magnetic transition characterized by a linear increase in the volume fraction of unconventional static short-range-ordered spin clusters, which triggered a transition into a long-range order at a threshold fraction perfectly matching the bond percolation theory in a new quantum antiferromagnet of pseudo-trigonal Cu
(OH)
Cl
. Static short-range order appeared in its Kagome lattice plane below Ca. 20 K from a pool of coexisting spin liquid, linearly increasing its fraction to 0.492(8), then all Kagome spins transitioned into a stable two-dimensional spin order at 
_
_
_
_
$. The unconventional static nature of the short-range order was inferred to be due to a pinning effect by the strongly correlated coexisting spin liquids. This work presents a unique magnetic system to demonstrate a complete bond percolation process toward the critical transition. Meanwhile, the unconventionally developed magnetic order in this chemically clean system should shed new light on spin-liquid physics.
Chen, H. F.*; Liu, B. X.*; 徐 平光; Fang, W.*; Tong, H. C.*; Yin, F. X.*
Journal of Materials Research and Technology, 32, p.3060 - 3069, 2024/09
被引用回数：0 パーセンタイル：0.00(Materials Science, Multidisciplinary)The hot-rolled microstructure of medium Mn steel has coarse grains and severe elemental segregation, resulting in low strength and plasticity. Constructing a multiphase structure, refining the microstructure, and regulating elemental segregation enhance the mechanical properties. In this study, liquid nitrogen treatment created a layered distribution of austenite and martensite. Warm rolling was then used to reduce layer thickness and refine grain structure. After liquid nitrogen and warm rolling treatments, the strength and plasticity of medium Mn steel increased to 1270 MPa and 23.3%, respectively, far exceeding the hot-rolled state (724 MPa, 12.8%). Warm rolling also triggers austenite reverted transformation (ART) and introduces high-density dislocations, further improving austenite stability. This strengthening effect is higher than that from intercritical annealing alone. Improved austenite stability delays the transformation induced plasticity (TRIP) effect, preventing brittle fracture and enhancing deformation coordination between layers, significantly increasing the plastic deformation capacity of medium Mn steel.
Hu, F. F.*; Qin, T. Y.*; Ao, N.*; Su, Y. H.; Zhou, L.*; 徐 平光; Parker, J. D.*; 篠原 武尚; Chen, J.*; Wu, S. C.*
Engineering Fracture Mechanics, 306, p.110267_1 - 110267_18, 2024/08
被引用回数：2 パーセンタイル：60.53(Mechanics)Non-destructive and quantitative mapping of gradient residual strain distribution in surface-hardened railway S38C axles could provide a positive reference for determining service lifetime and maintenance strategy. To tackle this concern, time-of-flight neutron Bragg-edge transmission imaging was employed by real axle samples with and without impacted crater. A novel and simple procedure to formulate the residual strain field was also developed in this work, with the transmission batch code in Appendix A. By mapping the global two- dimensional residual strains, it can be verified that the residual strains into the axle are uniformly distributed in the hoop direction. Subsequently, it was revealed that the axial and hoop residual strains, respectively in the cylinder and the long strip samples prepared from a real S38C hollow axle, indicated a gradient evolution distribution with a depth of 8 mm, covering a range of -5500 1000 for axial strains and -6500 1000 for hoop strains. More importantly, the maximum compressive lattice strain of the cylinder sample was increased by 15.61%, and 22.35% at the impacting speeds of 100, and 125 m/s, respectively; and that of the long strip sample increased by 29.17%, and 43.70%, respectively. It can thus be concluded that lattice strains have redistributed around the impact crater, demonstrating the local alteration of the residual strain field. These new findings suggest the localized variation in residual strains should be taken into account while evaluating the service damage evolution of railway axles, especially those affected by high-speed impacts during operation.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, H.*; Zhou, L.*; Ao, N.*; Su, Y. H.; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 185, p.108336_1 - 108336_13, 2024/08
被引用回数：8 パーセンタイル：94.71(Engineering, Mechanical)Gradient distribution of triaxial residual stresses to a depth of several millimeters is retained in middle carbon steel S38C axles after high-frequency induction hardening, which has become a critical concern for fatigue structural integrity. To address this, the axial, hoop, and radial gradient residual strains inside the axles were measured for the first time by advanced neutron diffraction. The SIGINI Fortran subroutine was then adopted to reconstruct the global initial residual stress field from the measured data. Experimental and simulation results show that residual stresses of about -520 MPa (axial), -710 MPa (hoop), and -40 MPa (radial) residual stress were retained below the axle surface. Subsequently, the fatigue crack propagation behavior of S38C axles was numerically investigated in the framework of fracture mechanics. The calculated results clearly show that the compressive residual stresses at a depth of 0?3 mm from the axle surface lead to a low crack growth driving force, and that fatigue cracks do not propagate as long as the crack depth is less than 3.7 mm for hollow S38C axles. These results further indicate that the maximum defect size allowed in routine inspections is acceptable from a safety and economic point of view. Accurate measurement and characterization of the global gradient residual stress field through experiments and simulations can provide an important reference for optimizing the mileage intervals of nondestructive testing (NDT) of surface defects in these surface-strengthened railway axles.
Wang, Y. W.*; 徐 平光; Su, Y. H.; Ma, Y. L.*; Wang, H. H.*
Physics Examination and Testing, 42(4), p.32 - 41, 2024/08
With the rapid technological development of large spallation neutron source facilities, the neutron beam flux obtained has been greatly improved and neutron imaging techniques have been further developed. Due to the limitation of neutron beam flux, conventional neutron imaging techniques require neutron beams with a wide wavelength range to obtain relatively high neutron beam flux conditions. Recently, spallation neutron sources using large proton accelerators have made it possible to obtain high-flux pulsed neutron beams. Energy (wavelength) resolved neutron imaging technique based on the Bragg edge effect (neutron Bragg edge transmission imaging technique) is expected to have a wide range of applications because of its high energy resolution, high spatial resolution, and ability to detect crystallographic information. The basic principle of this technique is briefly introduced. Several applications in the evaluation of residual strain, phase composition, dislocation density, and oriented structure are also reviewed to play an active role in promoting the wider applications of related technique.
Fang, W.*; Liu, C.*; Zhang, J.*; 徐 平光; Peng, T.*; Liu, B.*; 諸岡 聡; Yin, F.*
Scripta Materialia, 249, p.116046_1 - 116046_6, 2024/08
被引用回数：2 パーセンタイル：63.37(Nanoscience & Nanotechnology)The influence of interstitial carbon on the texture evolution of high-entropy alloys during cold rolling was investigated. To prevent carbide formation, elements with weak carbon affinity were carefully selected in the (FeMnCoNi)
C
alloy. Neutron diffraction, electron channeling contrast imaging, and electron backscatter diffraction were used to analyze the texture and microstructure evolution in alloys with and without carbon addition. Though their texture components are similar at the early stage of deformation, the Brass and Goss textures in the carbon-containing alloy at 50% cold rolling reduction are obviously higher than those in the carbon-free alloy, while Copper and S textures are lower. A large number of deformation twins induced in the carbon containing alloy is attributed as the significant reason for the texture differences. This work helps to understand the impact of interstitial carbon on the texture evolution of high-entropy alloys, providing valuable insights for microstructure and performance optimization.
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 55(7), p.2175 - 2185, 2024/07
被引用回数：3 パーセンタイル：75.40(Materials Science, Multidisciplinary)High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.
-delayed neutron emitters 
KXu, Z. Y.*; Grzywacz, R.*; Andreyev, A. N.; 他49名*
Physical Review Letters, 133(4), p.042501_1 - 042501_7, 2024/07
被引用回数：1 パーセンタイル：0.00(Physics, Multidisciplinary)We investigated decays of 
K at the ISOLDE Decay Station at CERN in order to understand the mechanism of the -delayed neutron-emission (n) process. The experiment quantified neutron and 
-ray emission paths for each precursor. We used this information to test the hypothesis, first formulated by Bohr in 1939, that neutrons in the n process originate from the structureless "compound nucleus". The data are consistent with this postulate for most of the observed decay paths. The agreement, however, is surprising because the compound-nucleus stage should not be achieved in the studied decay due to insufficient excitation energy and level densities in the neutron emitter. In the 
K n decay, we found a preferential population of the first excited state in 
Ca that contradicted Bohr's hypothesis. The latter was interpreted as evidence for direct neutron emission sensitive to the structure of the neutron-unbound state. We propose that the observed nonstatistical neutron emission proceeds through the coupling with nearby doorway states that have large neutron-emission probabilities. The appearance of "compound-nucleus" decay is caused by the aggregated small contributions of multiple doorway states at higher excitation energy.
Liao, J.*; Huang, Z.*; Shangguan, Y.*; Zhang, B.*; Cheng, S.*; Xu, H.*; 梶本 亮一; 蒲沢 和也*; Bao, S.*; Wen, J.*
Physical Review B, 109(22), p.224411_1 - 224411_10, 2024/06
被引用回数：0 パーセンタイル：0.00(Materials Science, Multidisciplinary)Antiferromagnetic van der Waals family 
P
( = Fe, Mn, Co, and Ni; 
= S and Se) have attracted significant research attention due to the possibility of realizing long-range magnetic order down to the monolayer limit. Here, we perform inelastic neutron scattering measurements on single-crystal samples of MnPSe, a member of the P family, to study the spin dynamics and determine the effective spin model. The excited magnon bands are well characterized by a spin model, which includes a Heisenberg term with three intraplane exchange parameters (
meV, 
meV, 
meV) and one interplane parameter (
meV), and an easy-plane single-ion anisotropy term (
meV). Additionally, we observe the intersection of the magnon and phonon bands but no anomalous spectral features induced by the formation of magnon-phonon hybrid excitations at the intersecting region. We discuss possible reasons for the absence of such hybrid excitations in MnPSe.
Mg; Bridging the 
and 
islands of inversionMadurga, M.*; Christie, J. M.*; Xu, Z.*; Grzywacz, R.*; Poves, A.*; King, T.*; Allmond, J. M.*; Chester, A.*; Cox, I.*; Farr, J.*; et al.
Physical Review C, 109(6), p.L061301_1 - L061301_6, 2024/06
被引用回数：2 パーセンタイル：78.45(Physics, Nuclear)ミシガン州立大学の国立超伝導サイクロトロン研究所にて
Caからのフラグメンテーション反応によって中性子過剰核Mgを生成、分離し、そのアイソマーを探した。その結果、168keVのガンマ線を出して
に半減期約90nsで脱励起するアイソマーを発見した。その性質を議論するため、大規模殻模型計算の結果と比較した。Mg同位体では中性子数20から28領域にかけて広く変形核となることが知られているが、理論的には、前者の領域は
殻から2個の中性子が励起することによって変形し、後者の領域は中性子数28の殻ギャップからの中性子励起によって変形する。Mgはその中間に位置し、両者の状態が近くに存在することで、励起エネルギーの低い
が出現すると理解される。
complex exhibiting intermolecular proton shifting coupled spin transitionJi, T.*; Su, S.*; Wu, S.*; 堀 優太*; 重田 育照*; Huang, Y.*; Zheng, W.*; Xu, W.*; Zhang, X.*; 鬼柳 亮嗣; et al.
Angewandte Chemie; International Edition, 63(25), p.e202404843_1 - e202404843_6, 2024/04
被引用回数：0 パーセンタイル：0.00(Chemistry, Multidisciplinary)In this study, we investigated reversible intermolecular proton shifting (IPS) coupled with spin transition (ST) in a novel Fe complex. The host Fe complex and the guest carboxylic acid anion were connected by intermolecular hydrogen bonds (IHBs). We extended the intramolecular proton transfer coupled ST phenomenon to the intermolecular system. The dynamic phenomenon was confirmed by variable-temperature single-crystal X-ray diffraction, neutron crystallography, and infrared spectroscopy.
Liss, K.-D.*; Han, J.-K.*; Blankenburg, M.*; Lienert, U.*; Harjo, S.; 川崎 卓郎; 徐 平光; 行武 栄太郎*; Kawasaki, M.*
Journal of Materials Science, 59(14), p.5831 - 5853, 2024/04
被引用回数：4 パーセンタイル：69.57(Materials Science, Multidisciplinary)The magnesium alloy AZ31, which has undergone high-pressure torsion processing, was subjected to in situ annealing micro-beam synchrotron high-energy X-ray diffraction and compared to the as-received rolled sheet material that was investigated through in situ neutron diffraction. While the latter only exhibits thermal expansion and minor recovery, the nanostructured specimen displays a complex evolution, including recovery, strong recrystallization, phase transformations, and various regimes of grain growth. Nanometer-scale grain sizes, determined using Williamson-Hall analysis, exhibit seamless growth, aligning with the transition to larger grains, as assessed through the occupancy of single grain reflections on the diffraction rings. The study uncovers strain anomalies resulting from thermal expansion, segregation of Al atoms, and the kinetics of vacancy creation and annihilation. Notably, a substantial number of excess vacancies were generated through high-pressure torsion, and maintained for driving the recrystallization and forming highly activated volumes for diffusion and phase precipitation during heating. The unsystematic scatter observed in the Williamson-Hall plot indicates high dislocation densities following severe plastic deformation, which significantly decreases during recrystallization. Subsequently, dislocations reappear during grain growth, likely in response to torque gradients in larger grains. It is worth noting that the characteristics of unsystematic scatter differ for dislocations created at high and low temperatures, underscoring the strong temperature dependence of slip system activation.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; G
mez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数：2 パーセンタイル：58.81(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核
Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態のArの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られるCaとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
