Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count：5 Percentile：84.97(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Nasu, Mitsunori*; Yanai, Hiroshi*; Hirayama, Naoki*; Adachi, Hironori*; Kakizawa, Yu*; Shirase, Yuto*; Nishiyama, Hiromichi*; Kawamoto, Teppei*; Inukai, Junji*; Shinohara, Takenao; et al.
Journal of Power Sources, 530, p.231251_1 - 231251_11, 2022/05
Times Cited Count：18 Percentile：89.77(Chemistry, Physical)Nakada, Akira; Nakano, Masanao; Kanai, Katsuta; Seya, Natsumi; Nishimura, Shusaku; Nemoto, Masashi; Tobita, Keiji; Futagawa, Kazuo; Yamada, Ryohei; Uchiyama, Rei; et al.
JAEA-Review 2021-062, 163 Pages, 2022/02
JAEA-Review-2021-062.pdf:2.87MB
Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2020 to March 2021. In this report, some data include the influence of the accidental release from the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. (the trade name was changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016) in March 2011. Appendices present comprehensive information, such as monitoring programs, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes. In addition, the data which were influenced by the accidental release and exceeded the normal range of fluctuation in the monitoring, were evaluated.
Nakano, Masanao; Nakada, Akira; Kanai, Katsuta; Nagaoka, Mika; Koike, Yuko; Yamada, Ryohei; Kubota, Tomohiro; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; et al.
JAEA-Review 2021-040, 118 Pages, 2021/12
JAEA-Review-2021-040.pdf:2.48MB
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2020. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Sakakibara, Hiroshi; Aoki, Nobuhiro; Muto, Masahiro; Otabe, Jun; Takahashi, Kenji*; Fujita, Naoyuki*; Hiyama, Kazuhiko*; Suzuki, Hirokazu*; Kamogawa, Toshiyuki*; Yokosuka, Toru*; et al.
JAEA-Technology 2020-020, 73 Pages, 2021/03
JAEA-Technology-2020-020.pdf:8.26MB
The decommissioning is currently in progress at the prototype fast breeder reactor Monju. Fuel assemblies will be taken out of its core for the first step of the great task. Fuel assemblies stand on their own spike plugged into a socket on the core support plate and support with adjacent assemblies through their housing pads each other, resulting in steady core structure. For this reason, some substitutive assemblies are necessary for the purpose of discharging the fuel assemblies of the core. Monju side commissioned, therefore, Plutonium Fuel Development Center to manufacture the substitutive assemblies and the Center accepted it. This report gives descriptions of design, manufacture, and shipment in regard to the substitutive assemblies.
Takahashi, Hiroki; Sawabe, Yuki; Ishiyama, Tatsuya*; Sakaki, Hironao*
JPS Conference Proceedings (Internet), 33, p.011014_1 - 011014_6, 2021/03
In J-PARC Linac and RCS, beam operation that does not exceed the allowable (limit) amount of integrated particles per hour must be performed. Then, to measure and monitor the integrated particles for each beam destination, the monitoring system of number of particles was developed. In this system, in order to monitor the number of particles correctly and reliably, it is indispensable to eliminate the mistake (error) of beam current measurement. Therefore, we have developed a particle counter that measures the number of particles correctly and reliably at a 25 Hz period by supervising the timing signals for beam measurement. In this paper, the functions of the monitoring system of number of particles will be described focusing on the timing signal supervising function of the particle counter.
Takeda, Naoya*; Kashima, Motohiko*; Odani, Sachika*; Uchiyama, Yusuke*; Kamidaira, Yuki; Mitarai, Satoshi*
Scientific Reports (Internet), 11(1), p.6963_1 - 6963_10, 2021/03
Times Cited Count：8 Percentile：64.2(Multidisciplinary Sciences)A massive coral bleaching event occurred in 2016 in the interior of Japan's largest coral lagoon, the Sekisei Lagoon, located in the Kuroshio upstream region in southwestern Japan. Recovery of the coral lagoon will require the influx of coral spawn and larvae; therefore, it is important to identify and conserve source sites. A surface particle tracking simulation of coral spawn and larvae was used to identify source areas in the exterior Sekisei Lagoon for restoration of the interior lagoon. The northern coastal zone of Iriomote Island, including Hatoma Island, was identified as a major source area. Hatoma Island was also identified as a key source for the Kuroshio downstream region, making it one of the most important source areas in the Nansei Archipelago.
Nakano, Masanao; Fujii, Tomoko; Nagaoka, Mika; Koike, Yuko; Yamada, Ryohei; Kubota, Tomohiro; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; Kikuchi, Masaaki*; et al.
JAEA-Review 2020-070, 120 Pages, 2021/02
JAEA-Review-2020-070.pdf:2.47MB
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2019. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Nakano, Masanao; Fujii, Tomoko; Nemoto, Masashi; Tobita, Keiji; Seya, Natsumi; Nishimura, Shusaku; Hosomi, Kenji; Nagaoka, Mika; Yokoyama, Hiroya; Matsubara, Natsumi; et al.
JAEA-Review 2020-069, 163 Pages, 2021/02
JAEA-Review-2020-069.pdf:4.78MB
Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2019 to March 2020. In this report, some data include the influence of the accidental release from the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. (the trade name was changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016) in March 2011. Appendices present comprehensive information, such as monitoring programs, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes. In addition, the data which were influenced by the accidental release and exceeded the normal range of fluctuation in the monitoring, were evaluated.
Nakano, Masanao; Fujii, Tomoko; Nagaoka, Mika; Inoue, Kazumi; Koike, Yuko; Yamada, Ryohei; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; Kikuchi, Masaaki*; et al.
JAEA-Review 2019-045, 120 Pages, 2020/03
JAEA-Review-2019-045.pdf:2.54MB
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2018. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Sonoda, Tetsu*; Katayama, Ichiro*; Wada, Michiharu*; Iimura, Hideki; Sonnenschein, V.*; Iimura, Shun*; Takamine, Aiko*; Rosenbusch, M.*; Kojima, Takao*; Ahn, D. S.*; et al.
Progress of Theoretical and Experimental Physics (Internet), 2019(11), p.113D02_1 - 113D02_12, 2019/11
Times Cited Count：1 Percentile：11.61(Physics, Multidisciplinary)An in-flight separator, BigRIPS, at RIBF in RIKEN provides each experiment with specific nuclides separated from many nuclides produced by projectile fragmentation or in-flight fission. In this process, nuclides other than separated ones are discarded on the slits in BigRIPS, although they include many nuclides interested from the view point of nuclear structure. In order to extract these nuclides for parasitic experiments, we are developing a method using laser ion-source (PALIS). A test experiment with 
Se beam from RIBF has been performed by using a gas cell set in BigRIPS. Unstable nuclides around 
Se were stopped in the gas cell in accordance with a calculation using LISE code. The stopping efficiency has been estimated to be about 30%. As a next step, we will establish the technique for extracting reaction products from the gas cell.
Takahashi, Hiroki; Hayashi, Naoki; Nishiyama, Koichi*; Suzuki, Takahiro*; Ishiyama, Tatsuya*
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.271 - 274, 2019/07
In the event of an abnormal situation, a machine protection system (MPS) that immediately inhibits the beam is indispensable to minimize the damage and the radioactivation by beam loss. The existing MPS was developed during the construction period of the J-PARC. Then, the system has been working stably for more than ten years. On the other hand, since there are many MPS modules that have been used from the beginning of J-PARC operation, it is important to systematically proceed with updating (replacement) of modules as a measure against aging of MPS. However, the main components of the existing MPS module have been discontinued. Therefore, it is indispensable to redesign the MPS modules in consideration of improvement such as the compatibility with existing modules and the miniaturization. In this paper, the development status of the new module and the update plan of MPS for Linac and RCS are detailed.
Nakano, Masanao; Fujita, Hiroki; Mizutani, Tomoko; Nagaoka, Mika; Inoue, Kazumi; Koike, Yuko; Yamada, Ryohei; Yoshii, Hideki*; Hiyama, Yoshinori*; Otani, Kazunori*; et al.
JAEA-Review 2018-028, 120 Pages, 2019/02
JAEA-Review-2018-028.pdf:2.69MB
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2017. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Takiya, Hiroaki; Ishiyama, Masahiro; Tezuka, Masashi; Kitayama, Naoki
Proceedings of International Conference on Dismantling Challenges; Industrial Reality, Prospects and Feedback Experience (DEM 2018) (Internet), 8 Pages, 2018/10
In FUGEN, we had isolated the reactor core by cutting pipes of the periphery systems (e.g. reactor cooling system, heavy water system, and helium system) between 2015 and 2017, as preparation for dismantling the reactor core and taking some samples from the reactor core structures. There are three issues to be solved at this isolation work; (1) to shorten the working time at high radiation area which is 1-5mSv/h at air and 10mSv/h at contact, (2) to prevent tritium spreading to working area at cutting work because tritium air is existing with 20-30Bq/cm
inside of the heavy water system and helium system, and (3) to minimize the influence of contaminated fume for the accurate radioactivity evaluation of reactor core structure. In this study, considering these problems, we discussed the method for cutting the pipes of heavy water system and helium system at the high radiation area and carried out the pipe cutting in the way.
Nakano, Masanao; Fujita, Hiroki; Nagaoka, Mika; Inoue, Kazumi; Koike, Yuko; Yoshii, Hideki*; Hiyama, Yoshinori*; Otani, Kazunori*; Kikuchi, Masaaki*; Sakauchi, Nobuyuki*; et al.
JAEA-Review 2017-037, 119 Pages, 2018/03
JAEA-Review-2017-037.pdf:2.58MB
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and bylaw of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2016. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Uchiyama, Naoki*; Ozawa, Tatsuya*; Sato, Koji*; Kobayashi, Jun; Onojima, Takamitsu; Tanaka, Masaaki
FAPIG, (194), p.12 - 18, 2018/02
no abstracts in English
Ueno, Yasuhiro*; Aoki, Masaharu*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; Ito, Takashi; Iwasaki, Masahiko*; et al.
Hyperfine Interactions, 238(1), p.14_1 - 14_6, 2017/11
Times Cited Count：3 Percentile：86.59(Physics, Atomic, Molecular & Chemical)Nakano, Masanao; Fujita, Hiroki; Kono, Takahiko; Nagaoka, Mika; Inoue, Kazumi; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; Kikuchi, Masaaki*; Sakauchi, Nobuyuki*; et al.
JAEA-Review 2017-001, 115 Pages, 2017/03
JAEA-Review-2017-001.pdf:3.57MB
Based on the regulations (the safety regulation of Tokai reprocessing plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and bylaw of Ibaraki prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2015. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
Strasser, P.*; Aoki, Masaharu*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; Ito, Takashi; Iwasaki, Masahiko*; et al.
Hyperfine Interactions, 237(1), p.124_1 - 124_9, 2016/12
Times Cited Count：7 Percentile：90.97(Physics, Atomic, Molecular & Chemical)Sawabe, Yuki*; Ishiyama, Tatsuya; Takahashi, Daisuke; Kato, Yuko; Suzuki, Takahiro*; Hirano, Koichiro; Takei, Hayanori; Meigo, Shinichiro; Kikuzawa, Nobuhiro; Hayashi, Naoki
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.647 - 651, 2016/11
In the J-PARC, a 3 MeV linac has been developed for the tests of beam scraper irradiation and charge exchange by high-power laser. To accomplish tests efficiently and safely, the control system for 3 MeV was designed and developed, and this system consists of four subsystems, personal protection system, machine protection system, timing system, and remote control system using the EPICS. In this paper, the details of control system for a 3 MeV linac are presented.
