Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Onoe, Hironori; Kimura, Hitoshi*
JAEA-Research 2019-001, 57 Pages, 2019/08
In this study, predictive simulations were conducted in order to understand recovery behavior of groundwater environment during groundwater filling test and underground facility closure. As a result of predictive simulations of groundwater filling test, difference of groundwater environment changes around the closure test drift according to groundwater filling volume was confirmed quantitatively. As a result of the simulations, groundwater environment changes at 10 years after underground facility closure could be estimated. And, it was shown that up-corning of deep saline water through drift and shaft was occurred if hydraulic conductivity of backfill material is higher than host rock.
Nagao, Fumiya; Niizato, Tadafumi; Sasaki, Yoshito; Ito, Satomi; Watanabe, Takayoshi; Dohi, Terumi; Nakanishi, Takahiro; Sakuma, Kazuyuki; Hagiwara, Hiroki; Funaki, Hironori; et al.
JAEA-Research 2019-002, 235 Pages, 2019/08
The accident of the Fukushima Daiichi Nuclear Power Station (hereinafter referred to 1F), Tokyo Electric Power Company Holdings, Inc. occurred due to the Great East Japan Earthquake, Sanriku offshore earthquake, of 9.0 magnitude and the accompanying tsunami. As a result, large amount of radioactive materials was released into the environment. Under these circumstances, JAEA has been conducting Long-term Environmental Dynamics Research concerning radioactive materials released in environment, especially migration behavior of radioactive cesium since November 2012. This report is a summary of the research results that have been obtained in environmental dynamics research conducted by JAEA in Fukushima Prefecture.
Nagai, Takayuki; Sasage, Kenichi; Okamoto, Yoshihiro; Shiwaku, Hideaki; Yamagishi, Hirona*; Ota, Toshiaki*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*; Takahashi, Tomoe*; et al.
JAEA-Research 2019-003, 94 Pages, 2019/09
The local structures of glass-forming elements and waste elements would change by the chemical composition of waste glass including those elements. In this study, simulated waste glass samples were prepared from borosilicate glass frit including phosphorus (P) or vanadium (V), and we investigated local structures of boron, sodium, and waste elements in these P glass and V glass samples by using synchrotron XAFS measurements in soft and hard X ray region.
Yoshikawa, Shinji
JAEA-Research 2019-004, 32 Pages, 2019/09
Steam and hydrogen generation history and gas leakage area are inversely evaluated by a thermal hydraulic analysis code GOTHIC. The analyzed period in the accident progression is from the arrival of reactor liquid level at the top of active fuel (TAF) until start of depressurization of reactor pressure vessel(RPV) by activation of automatic depressurization system(ADS). Based on the measured behaviors of the RPV and PCV pressures from 6:30 of March 13th until the ADS activation, some leakage from RPV to PCV is supposed during this period. The leakage path and area are inversely derived on plural possible accident scenarios. The leakage area are estimated to be no greater than 1 cm. This result suggests that the gas flow at the time of the main slumping would have been through S/C, where vapor condensation was effective, thus certain contribution of non-condensable gases like hydrogen seems necessary to explain the observed D/W pressure increase.
Ichikawa, Yasuaki*; Kimoto, Kazushi*; Matsui, Hiroya
JAEA-Research 2019-005, 32 Pages, 2019/10
It is important to evaluate the mechanical stability around the geological repository for high-level radioactive waste, during not only the design, construction and operation phases, but also the post-closure period over several millennia. The rock mass around the tunnels could be deformed in response to time dependent behaviors such as creep and stress relaxation. Therefore, this study has started as a joint research with Okayama University from 2016. This report summarize the results of the joint research performed in fiscal year 2017 and 2018. Based on the research results obtained in fiscal year 2016, automatic measurement system was developed, which can collect very large data on surface elastic wave propagation in a short time, also the applicability of various kinds of parameters derived from measured elastic wave data was examined.
Ishimaru, Tsuneari; Ogata, Nobuhisa; Hanamuro, Takahiro; Shimada, Akiomi; Kokubu, Yoko; Asamori, Koichi; Niwa, Masakazu; Shimada, Koji; Watanabe, Takahiro; Saiga, Atsushi; et al.
JAEA-Research 2019-006, 66 Pages, 2019/11
This annual report documents the progress of research and development (R&D) in the 4th fiscal year during the JAEA 3rd Mid- and Long-term Plan (fiscal years 2015-2021) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. The planned framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. In this report, the current status of R&D activities with previous scientific and technological progress is summarized.
Nakayama, Masashi; Ono, Hirokazu
JAEA-Research 2019-007, 132 Pages, 2019/12
The Horonobe Underground Research Laboratory (URL) Project has being pursued by Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, northern Hokkaido. The URL Project consists of two major research areas, "Geoscientific Research" and "Research and Development on Geological Disposal Technologies". The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had been prepared from 2013 to 2014 fiscal year at GL-350m gallery, and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the EBS experiment is acquiring data concerned with Thermal-Hydrological-Mechanical-Chemical (THMC) coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. This report shows following works had carried out at the GL-350 m gallery. Excavation of a test niche and a test pit, Setting buffer material blocks and a simulated overpack into the test pit, Backfilling the niche by compaction backfilling material and setting backfilling material blocks, Casting concrete type plug and contact grouting, Consolidate measurement system and start measuring.
Muramatsu, Toshiharu
JAEA-Research 2019-008, 111 Pages, 2019/11
A general-purpose three-dimensional thermohydraulics numerical simulation code SPLICE (residual Stress control using Phenomenological modeling for Laser welding repair process In Computational Environment) was designed to deal with gas-liquid-solid consolidated incompressible viscous flows with a phase change process in various laser applications. Main features of the SPLICE code are as follows: (1) A multi-scale model is used to simulate complicated phenomena, such as welding to solidification of metal materials, thermal and mechanical interactions among gas, liquid and solid phases, etc., (2) SPLICE code is applicable for the evaluation of welding, cutting, piercing, coating, additive manufacturing, etc. and (3) A graphic user interface (GUI) is prepared for users to easy utilization of the SPLICE code. This report describes the details of the mathematics, physics, numerics, sample applications of the SPLICE code.
Kondo, Satoru; Tobita, Yoshiharu
JAEA-Research 2019-009, 382 Pages, 2020/03
The SIMMER-III computer code, developed at the Japan Atomic Energy Agency (JAEA, the former Power Reactor and Nuclear Fuel Development Corporation), is a two-dimensional, multi-velocity-field, multi-component fluid-dynamics code, coupled with a space- and time-dependent neutron kinetics model. The code is being used widely for simulating complex phenomena during core-disruptive accidents (CDAs) in liquid-metal fast reactors (LMFRs). In parallel to the code development, a comprehensive assessment program was performed in two phases: Phase 1 for verifying individual fluid-dynamics models; and Phase 2 for validating its applicability to integral phenomena important to evaluating LMFR CDAs. The SIMMERIII assessment program was participated by European research and development organizations, and the achievement of Phase 1 was compiled and synthesized in 1996. This report has been edited by revising and reproducing the original 1996 informal report, which compiled the achievement of Phase 1 assessment. A total of 34 test problems were studied in the areas: fluid convection, interfacial area and momentum exchange, heat transfer, melting and freezing, and vaporization and condensation. The problems identified have been reflected to the Phase 2 assessment and later model development and improvement. Although the revisions were made in the light of knowledge base obtained later, the original individual contributions by the participants, both positive and negative, are retained except for editorial changes.
Yamashita, Takuya; Sawada, Noriyoshi*
JAEA-Research 2019-010, 227 Pages, 2020/03
In order to support the decontamination activities proceeded by the national government and municipalities in terms of technology, we have developed a simulation system "RESET" which predicts the effect of decontamination. We also developed a "two-component model" for the purpose of predicting long-term changes in the air dose rate. We use these tools to perform decontamination simulation and predictive analysis of the air dose rate after decontamination, and provide information to the national government and municipalities aiming for reconstruction. In this report, the verification result of the prediction methods implemented using actual measurement data obtained in the "Decontamination model demonstration project in difficult-to-return zone" and "Survey result on transition of air dose rate after decontamination model demonstration project" conducted by Ministry of the Environment. In addition, the decontamination simulation conducted for the entire difficult-to-return area and the results of future prediction of the air dose rate after decontamination are shown.
Aoyagi, Kazuhei; Chen, Y.*; Ishii, Eiichi; Sakurai, Akitaka; Miyara, Nobukatsu; Ishida, Tsuyoshi*
JAEA-Research 2019-011, 50 Pages, 2020/03
In this research, we performed the resin injection experiment at the 350 m Gallery of Horonobe Underground Research Laboratory in order to identify the distribution of fractures induced around the gallery owing to excavation. We also observed the rock cores obtained around the resin injection borehole under ultraviolet light. As a result, the extent of the development of EDZ fracture was 0.9 m from the gallery wall. In the depth within 0.4 m from the gallery wall, the density of the EDZ fracture is higher than the depth more than 0.4 m from the gallery wall. As a result of the analysis on the fracture aperture by image processing, the fractures with a large aperture (1.02 mm in maximum) were observed within 0.3 m from the gallery wall, while the maximum aperture was 0.19 mm in the depth more than 0.3 m from the gallery wall.
Matsuoka, Toshiyuki; Hama, Katsuhiro
JAEA-Research 2019-012, 157 Pages, 2020/03
The Mizunami Underground Research Laboratory (MIU) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies for geological disposal of High-level Radioactive Waste through investigations of the deep geological environment within the host crystalline rock at Mizunami City in Gifu Prefecture, central Japan. The project proceeds in three overlapping phases, "Phase I: Surface-based investigation Phase", "Phase II: Construction Phase" and "Phase III: Operation Phase". The MIU Project has been ongoing the Phase III, as the Phase II was concluded for a moment with the completion of the excavation of horizontal tunnels at GL-500m level in February 2014. The present report summarizes the research and development activities carried out mainly in the GL-500m stage during Third Medium to Long-term Research Phase.
Nakayama, Masashi; Saiga, Atsushi; Kimura, Shun; Mochizuki, Akihito; Aoyagi, Kazuhei; Ono, Hirokazu; Miyakawa, Kazuya; Takeda, Masaki; Hayano, Akira; Matsuoka, Toshiyuki; et al.
JAEA-Research 2019-013, 276 Pages, 2020/03
The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies for geological disposal of High-level Radioactive Waste through investigations of the deep geological environment within the host sedimentary rock at Horonobe Town in Hokkaido, north Japan. The investigations will be conducted in three phases, namely "Phase 1: Surface based investigations", "Phase 2: Construction phase" (investigations during construction of the underground facilities) and "Phase 3: Operation phase" (research in the underground facilities). According to the research plan described in the 3rd Mid- and Long- term Plan of JAEA, "Near-field performance study", "Demonstration of repository design option", and "Verification of crustal-movement buffering capacity of sedimentary rocks" are important issues of the Horonobe URL Project, and schedule of future research and backfill plans of the project will be decided by the end of 2019 Fiscal Year. The present report summarizes the research and development activities of these 3 important issues carried out during 3rd Medium to Long-term Research Phase.