検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

JT-60U負イオン源における無負荷時の絶縁破壊位置

Breakdown location without beam acceleration in the JT-60U negative ion source

小林 薫; 花田 磨砂也; 鎌田 正輝; 秋野 昇; 佐々木 駿一; 池田 佳隆

Kobayashi, Kaoru; Hanada, Masaya; Kamada, Masaki; Akino, Noboru; Sasaki, Shunichi; Ikeda, Yoshitaka

JT-60U負イオン源の耐電圧改善化研究の一環として、負イオン源加速器の絶縁破壊位置について実験的に調べた。本加速器の特長は、大面積多孔電極(0.45m$$times$$1.1m)を有する3段の静電式加速器であり、絶縁材として内径1.8mの大型FRP絶縁体を用いている点である。試験では、加速段ごとに高電圧を印加し、絶縁破壊位置をCCDカメラやアクリル板の電子励起発光から詳細に調べた。各段の耐電圧は、ほぼ同等の120$$sim$$130kVであり、設計加速電圧167kVより低かった。絶縁破壊位置を絞り込むために、加速器から加速電極とその支持枠を取り除きFRP絶縁体のみにして高電圧を印加した。FRP絶縁体の耐電圧は、少ないコンディショニング時間で167kVに到達した。これらの結果から、絶縁破壊位置はおもに加速電極か支持枠で発生していることがわかった。さらに絶縁破壊位置が加速電極間か支持枠間かの同定に関しては、CCDカメラやアクリル板で観測された光の位置から、第1及び第2加速ギャップでは、放電破壊位置は加速電極支持枠で発生している可能性が高いことがわかった。一方、第3加速ギャップに関しては、絶縁破壊の多くは加速電極間で発生することが明らかとなった。

Breakdown locations of a JT-60U negative ion source were investigated to improve the voltage holding capability. The accelerator is characterized by three acceleration stages with large grids 0.45 m $$times$$ 1.1 m and large FRP insulators 1.8 m in inner diameter. High voltages were applied to each acceleration stage independently. Voltage holding capabilities of each stage were almost the same, $$sim$$ 120-130 kV, which was lower than the design acceleration voltage of 167 kV. Then, in order to identify whether the breakdowns occur in the gaps between grids or on the surface of the FRP insulators, high voltages were also applied to the accelerator with the grids and their support flanges removed. The voltage holding capabilities of three FRP insulators rapidly achieved 167 kV. These results indicate that the breakdowns mainly occur in the gaps between the acceleration grids and/or their support flanges.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.