Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Gu, G. H.*; Jeong, S. G.*; Heo, Y.-U.*; Harjo, S.; Gong, W.; Cho, J.*; Kim, H. S.*; 他4名*
Journal of Materials Science & Technology, 223, p.308 - 324, 2025/07
被引用回数：0 パーセンタイル：0.00(Materials Science, Multidisciplinary)Face-centered cubic (FCC) equi-atomic multi-principal element alloys (MPEAs) exhibit excellent mechanical properties from cryogenic to room temperatures. At room temperature, deformation is dominated by dislocation slip, while at cryogenic temperatures (CTs), reduced stacking fault energy enhances strain hardening with twinning. This study uses in-situ neutron diffraction to analyze the temperature-dependent deformation behavior of Al
(CoNiV)
, a dual-phase (FCC/BCC) medium-entropy alloy (MEA). At liquid nitrogen temperature (LNT), deformation twinning in the FCC matrix leads to additional strain hardening through the dynamic Hall-Petch effect, giving the appearance of improved strengthening at LNT. In contrast, BCC precipitates show dislocation slip at both 77 K and 298 K, with temperature-dependent lattice friction stress playing a significant role in strengthening. The study enhances understanding of deformation behaviors and provides insights for future alloy design.
Li, F.*; Tang, X.*; Fei, Y.*; Zhang, J.*; Liu, J.*; Lang, P.*; Che, G.*; Zhao, Z.*; Zheng, Y.*; Fang, Y.*; et al.
Journal of the American Chemical Society, 147(17), p.14054 - 14059, 2025/04
被引用回数：1 パーセンタイル：0.00(Chemistry, Multidisciplinary)2,2'-ビピラジン(BPZ)の圧力誘起重合により結晶性グラファンナノリボン(GANR)を合成した。中性子回折データのリートベルト精密化,核磁気共鳴スペクトル,赤外スペクトル,理論計算を行った結果、BPZは
積層した芳香環の間でディールス・アルダー重合し、並外れた長距離秩序を持つ伸びたボート型GANR構造を形成することがわかった。未反応の-C=N-基がボートの両端を橋渡ししており、さらなる機能化の余地がある。このGANRのバンドギャップは2.25eVであり、光電応答は良好である(I
/I
=18.8)。われわれの研究は、高圧トポケミカル重合法が、特定の構造と望んだ特性を持つグラファンの精密な合成に有望な方法であることを強調している。
Go, J.*; Park, M.-H.*; Gao, S.*; 松宮 久*; Gong, W.; 辻 伸泰*
Journal of Alloys and Compounds, 1014, p.178749_1 - 178749_10, 2025/02
被引用回数：2 パーセンタイル：95.66(Chemistry, Physical)In Mg alloys, basal dislocation slip is the preferential slip system that is activated at room temperature, while non-basal slips are typically difficult to activate owing to their high critical resolved shear stress. Until now, minimal focus has been directed towards the influence of loading direction on slip behavior in pre-twinned AZ31 alloys. This study employed transmission electron microscopy to demonstrate that non-basal slips, specifically prismatic and pyramidal I slips, are activated under deformation conditions where de-twinning is difficult in a pre-twinned AZ31 Mg alloy. When the tensile loading direction is parallel to the precompression direction, de-twinning and basal slip are the primary deformation modes. Conversely, when the tensile loading direction is perpendicular to the precompression direction, where de-twinning is challenging to activate, both basal and non-basal slips, such as prismatic and pyramidal I slips, emerge as the primary deformation modes. These results indicate that the pre-twinned AZ31 Mg alloy cannot deform solely through basal slips, and the activation of either de-twinning or non-basal slips is necessary to satisfy the von Mises criterion. Our findings in this study demonstrate the impact of non-basal slip activity on macroscopic yield stress and overall deformation, hence enhancing the understanding of magnesium alloy deformation mechanisms.
Naeem, M.*; Ma, Y.*; Tian, J.*; Kong, H.*; Romero-Resendiz, L.*; Fan, Z.*; Jiang, F.*; Gong, W.; Harjo, S.; Wu, Z.*; et al.
Materials Science & Engineering A, 924, p.147819_1 - 147819_10, 2025/02
被引用回数：1 パーセンタイル：0.00(Nanoscience & Nanotechnology)Face-centered cubic (fcc) medium-/high-entropy alloys (M/HEAs) typically enhance strength and ductility at cryogenic temperatures via stacking faults, twinning, or martensitic transformation. However, in-situ neutron diffraction on VCoNi MEA at 15 K reveals that strain hardening is driven solely by rapid dislocation accumulation, without these mechanisms. This results in increased yield strength, strain hardening, and fracture strain. The behavior, explained by the Orowan equation, challenges conventional views on cryogenic strengthening in fcc M/HEAs and highlights the role of dislocation-mediated plasticity at low temperatures.
Yang, X.*; Che, G.*; Wang, Y.*; Zhang, P.*; Tang, X.*; Lang, P.*; Gao, D.*; Wang, X.*; Wang, Y.*; 服部 高典; et al.
Nano Letters, 25(3), p.1028 - 1035, 2025/01
被引用回数：1 パーセンタイル：84.76(Chemistry, Multidisciplinary)飽和sp
-カーボンナノスレッド(CNTh)は、その高いヤング率と熱伝導率が予測され、大きな関心を集めている。中心環へのヘテロ原子の導入がCNThの形成に影響を与え、化学的に均質な生成物が得られることが示されているが、ペンダント基が重合プロセスに与える影響については、まだ未解明である。本研究では、フェノールの圧力誘起重合を調べ、0.5GPaと4GPa以下で起こる2つの相転移を明らかにした。20GPa以上では、フェノールは水酸基とカルボニル基を持つ重合度4のCNTに重合する。ヒドロキシル基の水素移動は、重合度6のナノスレッドの形成を妨げることがわかった。この発見は、さらなるカラム内重合を阻止する水酸基の重要な役割を浮き彫りにし、今後のメカニズム研究やナノ材料合成に貴重な示唆を与えるものである。
Che, G.*; Fei, Y.*; Tang, X.*; Zhao, Z.*; 服部 高典; 阿部 淳*; Wang, X.*; Ju, J.*; Dong, X.*; Wang, Y.*; et al.
Physical Chemistry Chemical Physics, 27(2), p.1112 - 1118, 2025/01
被引用回数：3 パーセンタイル：75.15(Chemistry, Physical)芳香族分子の圧力誘起重合(PIP)は、様々な炭素系材料を合成するための効果的な方法として浮上してきた。目的とする構造や機能を得るためには、適切な官能基化された分子前駆体の選択が極めて重要である。本研究では、1,4-ジフルオロベンゼン(1,4-DFB)をPIPの構成要素として選択した。1,4-DFBをその場高圧で調べた結果、約12.0GPaで相転移が起こり、18.7GPaで不可逆的な化学反応が起こることがわかった。生成物の構造解析と反応のカイネティクスから、直線的な成長を伴う擬六方晶積層フッ素ダイヤモンドナノスレッドの形成が明らかになった。高圧下のベンゼンの結晶構造と比較して、1,4-DFBは[001]軸に沿って高い圧縮を示す。この異方的な圧縮は、[01
]軸に沿ったより強いH
相互作用と、[100]軸と[010]軸に沿った潜在的な圧縮阻害H
F相互作用に起因し、[01]軸に沿った可能な反応経路を促進する。この研究は、分子スタッキングを調節し、反応経路に影響を与える官能基化の重要な役割を強調している。
Xu, J.*; Lang, P.*; Liang, S.*; Zhang, J.*; Fei, Y.*; Wang, Y.*; Gao, D.*; 服部 高典; 阿部 淳*; Dong, X.*; et al.
Journal of Physical Chemistry Letters (Internet), p.2445 - 2451, 2025/00
被引用回数：0 パーセンタイル：0.00(Chemistry, Physical)アルダー-エン反応は、アルケンとアリル水素との化学反応であり、C-C結合を構築する効率的な方法である。従来、この反応には触媒、高温、あるいは光触媒が必要であった。本研究では、触媒を用いずに室温下で加圧することで成功した1-ヘキセンのアルダー-エン反応を報告する。1-ヘキセンは4.3GPaで結晶化し、18GPaで重合してオレフィンを形成する。ガスクロマトグラフィー-質量分析法により、1-ヘキセンが高圧下でのアルダー-エン反応により二量体を生成することを発見した。その場中性子回折から、この反応過程はトポケミカル則に従わないことがわかった。理論計算により、1つのC-H 
結合と2つのアルケン結合を含む6員環遷移状態が示され、そのエネルギーは20GPaまで圧縮すると明らかに減少した。本研究は、触媒を用いずに室温でアルダー-エン反応を実現する新規かつ有望な方法を提供し、この重要な反応の応用を拡大するものである。
Liu, P.-F.*; Li, X.*; Li, J.*; Zhu, J.*; Tong, Z.*; 古府 麻衣子*; 楡井 真実; Xu, J.*; Yin, W.*; Wang, F.*; et al.
National Science Review, 11(12), p.nwae216_1 - nwae216_10, 2024/12
被引用回数：13 パーセンタイル：94.32(Multidisciplinary Sciences)Crystalline solids exhibiting inherently low lattice thermal conductivity (
) are of great importance in applications such as thermoelectrics and thermal barrier coatings. However, cannot be arbitrarily low and is limited by the minimum thermal conductivity related to phonon dispersions. In this work, we report the liquid-like thermal transport in a well-ordered crystalline CsAg
Te
, which exhibits an extremely low value of 
0.18 Wm
K. On the basis of first-principles calculations and inelastic neutron scattering measurements, we find that there are lots of low-lying optical phonon modes at 3.1 meV hosting the avoided-crossing behavior with acoustic phonons. These strongly localized modes are accompanied by weakly bound rattling Ag atoms with thermally induced large amplitudes of vibrations. Using the two-channel model, we demonstrate that coupling of the particle-like phonon modes and the heat-carrying wave-like phonons is essential for understanding the low , which is heavily deviated from the 
temperature dependence of the standard Peierls theory. In addition, our analysis indicates that the soft structural framework with liquid-like motions of the fluctuating Ag atoms is the underlying cause that leads to the suppression of the heat conduction in CsAgTe. These factors synergistically account for the ultralow value. Our results demonstrate that the liquid-like heat transfer could indeed exist in a well-ordered crystal.
signatures in two-dimensional cone beam interferometrySarenac, D.*; Gorbet, G.*; Clark, C. W.*; Cory, D. G.*; Ekinci, H.*; Henderson, M. E.*; Huber, M. G.*; Hussey, D. S.*; Kapahi, C.*; Kienzle, P. A.*; et al.
Physical Review Research (Internet), 6(3), p.L032054_1 - L032054_8, 2024/09
Neutron interferometry has played a distinctive role in fundamental science and characterization of materials. Moir neutron interferometers are candidate next-generation instruments: they offer microscopy-like magnification of the signal, enabling direct camera recording of interference patterns across the full neutron wavelength spectrum. Here we demonstrate the extension of phase-grating moir interferometry to two-dimensional geometries. Our measurements of phase topologies and gravitationally induced phase shifts are in good agreement with theory.
Wang, S.*; Wang, J.*; Zhang, S.*; Wei, D.*; Chen, Y.*; Rong, X.*; Gong, W.; Harjo, S.; Liu, X.*; Jiao, Z.*; et al.
Journal of Materials Science & Technology, 185, p.245 - 258, 2024/06
被引用回数：17 パーセンタイル：98.00(Materials Science, Multidisciplinary)Nanoprecipitates and nanoscale retained austenite (RA) with suitable stability play crucial roles in determining the yield strength (YS) and ductility of ultrahigh strength steels (UHSSs). However, owing to the kinetics incompatibility between nanoprecipitation and austenite reversion, it is highly challenging to simultaneously introduce high-density nanoprecipitates and optimized RA in UHSSs. In this work, through the combination of austenite reversion treatment (ART) and subsequent flash austenitizing (FA), nanoscale chemical heterogeneity was successfully introduced into a low-cost UHSS prior to the aging process. This chemical heterogeneity involved the enrichment of Mn and Ni in the austenite phase. The resulting UHSS exhibited dual-nanoprecipitation of Ni(Al,Mn) and (Mo,Cr)
C and nanoscale austenite stabilized via Mn and Ni enrichment. The hard martensitic matrix strengthened by high-density dual-nanoprecipitates constrains the plastic deformation of soft RA with a relatively low fraction, and the presence of relatively stable nanoscale RA with adequate Mn and Ni enrichment leads to a marginal loss in YS but keeps a persistent transformation-induced plasticity (TRIP) effect. As a result, the newly-developed UHSS exhibits an ultrahigh YS of 1.7 GPa, an ultimate tensile strength (UTS) of 1.8 GPa, a large uniform elongation (UE) of 8.5 percent, and a total elongation (TE) of 13 percent. The strategy of presetting chemical heterogeneity to introduce proper metastable phases before aging can be extended to other UHSSs and precipitation-hardened alloys.
Sarenac, D.*; Gorbet, G.*; Kapahi, C.*; Clark, C. W.*; Cory, D. G.*; Ekinci, H.*; Garrad, D. V.*; Henderson, M. E.*; Huber, M. G.*; Hussey, D.*; et al.
Physical Review Research (Internet), 6(2), p.023260_1 - 023260_15, 2024/06
Phase-grating moire interferometers (PGMIs) have emerged as promising candidates for the next generation of neutron interferometry, enabling the use of a polychromatic beam and manifesting interference patterns that can be directly imaged by existing neutron cameras. However, the modeling of the various PGMI configurations is limited to cumbersome numerical calculations and backward propagation models which often do not enable one to explore the setup parameters. Here we generalize the Fresnel scaling theorem to introduce a k-space model for PGMI setups illuminated by a cone beam, thus enabling an intuitive forward propagation model for a wide range of parameters and experimental setups.
Kim, Y. S.*; Chae, H.*; Lee, D.-Y.*; Han, J. H.*; Hong, S.-K.*; Na, Y. S.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Lee, S.-Y.*
Materials Science & Engineering A, 899, p.146453_1 - 146453_7, 2024/05
被引用回数：4 パーセンタイル：79.11(Nanoscience & Nanotechnology)This work focused on the mechanical properties and serration-involved deformation behavior of advanced alloys at 15 K. Evolution of stacking faults and 
-martensite improved the mechanical performance of CoCrNi alloys, and significant strain-induced martensite transformation of DED-SS316L led to superior strength and strain hardening. A magnitude in stress drop was governed by dislocation density, phase type, and lattice defects, irrespective of processing method. FCC {200} notably was influenced recovery behavior after stress drop, and the contribution of strain energy density by serration on tensile toughness was the greatest for HR-CoCrNi.
Guo, B.*; Chen, H.*; Chong, Y.*; Mao, W.; Harjo, S.; Gong, W.; Zhang, Z.*; Jonas, J. J.*; 辻 伸泰*
Acta Materialia, 268, p.119780_1 - 119780_11, 2024/04
被引用回数：10 パーセンタイル：94.16(Materials Science, Multidisciplinary)This paper focused on the characterization and mechanism of the dynamic transformation from the alpha to beta phase during the hot deformation of Ti-6Al-4V alloy and pure titanium. The investigation employed in-situ neutron diffraction and atomistic simulations for a comprehensive understanding of the process. Dynamic transformations were observed during deformation of the Ti-6Al-4V alloy and pure titanium below the beta transus temperatures. During isothermal holding after unloading, the in-situ neutron diffraction results for Ti-6Al-4V and pure titanium indicated a sluggish reverse transformation from the beta to alpha phase. The mechanism of dynamic transformation was explored through in-situ neutron diffraction and atomistic simulations, which revealed twofold effects of deformation on dynamic transformation. Firstly, deformation led to a significant rise in the Gibbs energy of the alpha phase relative to the beta phase, expanding the beta phase region and diminishing the alpha phase region. Secondly, deformation lowered the energy barriers associated with dynamic transformation, facilitating the activation of dynamic transformation more readily than in the equilibrium state before deformation.
SnHuang, Z.*; Wang, W.*; Ye, H.*; Bao, S.*; Shangguan, Y.*; Liao, J.*; Cao, S.*; 梶本 亮一; 池内 和彦*; Deng, G.*; et al.
Physical Review B, 109(1), p.014434_1 - 014434_9, 2024/01
被引用回数：3 パーセンタイル：57.35(Materials Science, Multidisciplinary)TbMnSn is a correlated topological magnet with a Mn-based kagome lattice, in which a Chern gap opens at the Dirac point at low temperatures. The magnetic moment direction of the ferrimagnetic order changes from in the kagome plane to the out-of-plane upon cooling, which is essential for generating the Chern gap, but the underlying mechanism for the spin reorientation remains elusive. Here, we investigate the spin-reorientation transition in TbMnSn using neutron scattering. We provide direct evidence for the spin-reorientation transition and unveil the coexistence of two Tb modes at 200 K. To account for these results, we put forward a model based on SU(N) spin-wave theory, in which there is a temperature evolution of the ground state Tb 
orbitals, driven by the crystalline electric field, single-ion anisotropy, and exchange interactions between Tb and Mn ions. Our findings shed light on the complex magnetism of TbMnSn, despite its relatively simple ground state magnetic structure, and provide insights into the mechanisms for tuning magnetic topological materials.
Shangguan, Y.*; Bao, S.*; Dong, Z.-Y.*; Xi, N.*; Gao, Y.-P.*; Ma, Z.*; Wang, W.*; Qi, Z.*; Zhang, S.*; Huang, Z.*; et al.
Nature Physics, 19(12), p.1883 - 1889, 2023/09
被引用回数：19 パーセンタイル：93.50(Physics, Multidisciplinary)The magnetization of a quantum magnet can be pinned at a fraction of its saturated value by collective effects. One example of such a plateau phase is found in spin-1/2 triangular-lattice antiferromagnets. They feature strong geometrical frustration and the plateau phase therein is often interpreted as arising from an order-by-disorder mechanism driven by quantum fluctuations. Here we observe a one-third magnetization plateau under an applied magnetic field in the spin-1 antiferromagnet Na
NiBiO with a honeycomb lattice, which, with conventional magnetic interactions, would not be geometrically frustrated. Based on our elastic neutron scattering measurements, we propose the spin structure of the plateau phase to be an unusual partial spin-flop ferrimagnetic order. Our theoretical calculations indicate that bond-anisotropic Kitaev interactions are the source of frustration that produces the plateau. These results suggest that Kitaev interactions provide a different route to frustration and phases driven by quantum fluctuations in high-spin magnets.
Kwon, H.*; Sathiyamoorthi, P.*; Gangaraju, M. K.*; Zargaran, A.*; Wang, J.*; Heo, Y.-U.*; Harjo, S.; Gong, W.; Lee, B.-J.*; Kim, H. S.*
Acta Materialia, 248, p.118810_1 - 118810_12, 2023/04
被引用回数：54 パーセンタイル：99.28(Materials Science, Multidisciplinary)Maraging steels, known for ultrahigh strength and good fracture toughness, derive their superior properties from lath martensite structure with high-density nanoprecipitates. In this work, we designed a novel Fe-based medium-entropy alloy with a chemical composition of Fe
Co
Ni
Mo in atomic% by utilizing the characteristics of the maraging steels. By a single-step aging of only 10 min at 650 
C, the alloy showed microstructures consisting of a very high number density of (Fe, Co, Ni)
Mo
-type nanoprecipitates in lath martensite structure and reverted FCC phase, which led to ultrahigh yield strength higher than 2 GPa. This work demonstrates a novel direction to produce strong and ductile materials by expanding the horizons of material design with the aid of high-entropy concept and overcoming the limits of conventional materials.
Woo, W.*; Kim, Y. S.*; Chae, H. B.*; Lee, S. Y.*; Jeong, J. S.*; Lee, C. M.*; Won, J. W.*; Na, Y. S.*; 川崎 卓郎; Harjo, S.; et al.
Acta Materialia, 246, p.118699_1 - 118699_13, 2023/03
被引用回数：49 パーセンタイル：99.20(Materials Science, Multidisciplinary)In situ neutron diffraction experiments have been performed under loading in cast-wrought (CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The diffraction line profile analysis correlated the faulting-embedded crystal structure to the dislocation density, stacking/twin fault probability, and stacking fault energy as a function of strain. The results showed the initial dislocation density of 1.8
10
m
in CW and 1.310
m in AM. It significantly increased up to 1.310
m- in CW and 1.710 m in AM near fracture. The dislocation density contributed to the flow stress of 470 MPa in CW and 600 MPa in AM, respectively. Meanwhile, the twin fault probability of CW (2.7%) was about two times higher than AM (1.3%) and the stacking fault probability showed the similar tendency. The twinning provided strengthening of 360 MPa in CW and 180 MPa in AM. Such a favorable strengthening via deformation twinning in CW and dislocation slip in AM was attributed to the stacking fault energy. It was estimated as 18.6 mJ/m
in CW and 37.5 mJ/m in AM by the strain field of dislocations incorporated model. Dense dislocations, deformation twinning, and atomic-scale stacking structure were examined by using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM).
phase to 
phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformationGuo, B.*; Mao, W.; Chong, Y.*; 柴田 曉伸*; Harjo, S.; Gong, W.; Chen, H.*; Jonas, J. J.*; 辻 伸泰*
Acta Materialia, 242, p.118427_1 - 118427_11, 2023/01
被引用回数：12 パーセンタイル：68.62(Materials Science, Multidisciplinary)Dynamic transformation from alpha (HCP) to beta (BCC) phase in a zirconium alloy was revealed by the use of in-situ neutron diffraction during hot compression. The dynamic transformation was unexpectedly detected during isothermal compression at temperatures of 900C and 950C (alpha + beta two-phase region) and strain rates of 0.01 s and 0.001 s, even though equilibrium two-phase states were achieved prior to the hot compression. Dynamic transformation was accompanied by diffusion of Sn from beta to alpha phase, which resulted in changes of lattice parameters and a characteristic microstructure of alpha grains. The details of dynamic transformation are discussed using the evolution of lattice constants.
Wei, D.*; Gong, W.; 都留 智仁; Lobzenko, I.; Li, X.*; Harjo, S.; 川崎 卓郎; Do, H.-S.*; Bae, J. W.*; Wagner, C.*; et al.
International Journal of Plasticity, 159, p.103443_1 - 103443_18, 2022/12
被引用回数：107 パーセンタイル：99.79(Engineering, Mechanical)Face-centered cubic single-phase high-entropy alloys (HEAs) containing multi-principal transition metals have attracted significant attention, exhibiting an unprecedented combination of strength and ductility owing to their low stacking fault energy (SFE) and large misfit parameter that creates severe local lattice distortion. Increasing both strength and ductility further is challenging. In the present study, we demonstrate via meticulous experiments that the CoCrFeNi HEA with the addition of the substitutional metalloid Si can retain a single-phase FCC structure while its yield strength (up to 65%), ultimate strength (up to 34%), and ductility (up to 15%) are simultaneously increased, owing to a synthetical effect of the enhanced solid solution strengthening and a reduced SFE. The dislocation behaviors and plastic deformation mechanisms were tuned by the addition of Si, which improves the strain hardening and tensile ductility. The present study provides new strategies for enhancing HEA performance by targeted metalloid additions.
BaCo(PO
)Sheng, J.*; Wang, L.*; Candini, A.*; Jiang, W.*; Huang, L.*; Xi, B.*; Zhao, J.*; Ge, H.*; Zhao, N.*; Fu, Y.*; et al.
Proceedings of the National Academy of Sciences of the United States of America, 119(51), p.e2211193119_1 - e2211193119_9, 2022/12
被引用回数：34 パーセンタイル：93.63(Multidisciplinary Sciences)Although considerable progress has been made in the theoretical understanding of the low-dimensional frustrated quantum magnets, experimental realizations of a well-established scaling analysis are still scarce. This is particularly true for the two-dimensional antiferromagnetic triangular lattices. Owing to the small exchange strength, the newly discovered compound NaBaCo(PO) provides a rare opportunity for clarifying the quantum criticality in an ideal triangular lattice with quantum spin S=1/2. In addition to the establishment of the complete phase diagrams, the spin Hamiltonian with a negligible interplane interaction has been determined through the spin wave dispersion in the polarized state, which is consistent with the observation of a two-dimensional quantum critical point with the Bose-Einstein condensation of diluted free bosons.
