Dynamic properties on
Mo adsorption and
Tc elution with alumina columns
アルミナカラムを使用した
Mo吸着および
Tc溶出の動的特性
藤田 善貴
; 関 美沙紀
; 佐野 忠史*; 藤原 靖幸*; 鈴木 達也*; 吉永 尚生*; 堀 順一*; 末松 久幸*; 土谷 邦彦 
Fujita, Yoshitaka; Seki, Misaki; Sano, Tadafumi*; Fujihara, Yasuyuki*; Suzuki, Tatsuya*; Yoshinaga, Hisao*; Hori, Junichi*; Suematsu, Hisayuki*; Tsuchiya, Kunihiko
モリブデン-99(
Mo)の娘核種であるテクネチウム-99m(
Tc)は、放射性医薬品で最も使用される放射性同位元素である。核不拡散や核セキュリティ等の観点から、放射化法((n,
)法)による
Mo製造技術開発が進められている。(n,
)法によって生成される
Moの比放射能は極めて低いため、(n,
)
Moをジェネレータに適応させるには高いMo吸着容量を有するAl
O
の開発が必要不可欠である。本研究では、材料が異なる3種類のAl
O
を準備し、静的および動的吸着でのジェネレータへの適応性を比較した。MoO
ペレット片(1.5g)は、京都大学研究用原子炉(KUR)を使用して5MW, 20分間照射した。照射後、MoO
ペレット片は6Mの水酸化ナトリウム水溶液で溶解し、動的吸着条件として1gのAl
O
を充填したPFAチューブ(
1.59mm)に添加し、生理食塩水によりミルキングした。動的吸着でのAl
O
の
Mo吸着容量は、静的吸着と比較してわずかに減少した。
Tc溶出率は、動的吸着では1.5mLのミルキングで約100%溶出されたが、静的吸着では約56-87%しか溶出されなかった。また、動的吸着では
Mo/
Tc比が、静的吸着と比較して大幅に減少した。以上より、
Tc溶出特性は、Moの吸着方法(カラムの形状,線形流量など)に大きく影響されることが示唆された。
Technetium-99m (
Tc), the daughter nuclide of Molybdenum-99 (
Mo), is the most commonly used radioisotope in radiopharmaceuticals. The research and development (R&D) for the production of
Mo by the neutron activation method ((n,
) method) has been carried out from viewpoints of no-proliferation and nuclear security, etc. Since the specific activity of
Mo produced by the (n,
) method is extremely low, developing Al
O
with a large Mo adsorption capacity is necessary to adapt (n,
)
Mo to the generator. In this study, three kinds of Al
O
specimens with different raw materials were prepared and compared their adaptability to generators by static and dynamic adsorption. MoO
pellet pieces (1.5g) were irradiated with 5 MW for 20 min in the Kyoto University Research Reactor (KUR). Irradiated MoO
pellet pieces were dissolved in 6M-NaOH aq. In dynamic adsorption, 1 g of Al
O
was filled into a PFA tube (
1.59 mm). The
Mo adsorption capacity of Al
O
specimens under dynamic condition was slightly reduced compared to that under static condition. The
Tc elution rate was about 100% at 1.5 mL of milking in dynamic adsorption, while it was around 56-87% in static adsorption. The
Mo/
Tc ratio of dynamic condition was greatly reduced compared to that of static condition. Therefore, the
Tc elution property is greatly affected by the method of adsorbing Mo, e.g., the column shape, the linear flow rate, etc.