Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
西川 雅史*; 加藤 尊秋*; 本間 俊充; 高原 省五
Environmental Science & Policy, 55(Part 1), p.11 - 19, 2016/01
被引用回数：12 パーセンタイル：36.6(Environmental Sciences)We quantitatively analyzed changes in residents' perceptions of the net benefits derived from the Kashiwazaki Kariwa Nuclear Power Station (KK) before and after the accident at the Fukushima Daiichi Plant (FD). From this analysis, we found that KK's perceived net benefits declined after the FD accident. This decline resulted from changes in respondents' relative weightings of KK's costs and benefits. We also found that residents living near nuclear facilities are more concerned about health risks from nuclear accidents than the likelihood of such accidents caused by human error. We suggest that a more effective policy entails changing people's relative weighting of nuclear facilities' costs and benefits by protecting lives through enhanced evacuation planning and post-disaster support for rehabilitation, although Japan's current nuclear power policy aims to assuage people's risk perceptions by reducing the probability of nuclear accidents to zero.
加田 渉*; 三浦 健太*; 加藤 聖*; 猿谷 良太*; 久保田 篤志*; 佐藤 隆博; 江夏 昌志; 石井 保行; 神谷 富裕; 西川 宏之*; et al.
Nuclear Instruments and Methods in Physics Research B, 348, p.218 - 222, 2015/04
被引用回数：6 パーセンタイル：45.92(Instruments & Instrumentation)The Mach-Zehnder (MZ) optical structures were previously fabricated in a Poly-methyl-methacrylate (PMMA) thin film by Proton Beam Writing (PBW). The enhancement of optical transmittance in the structures is, however, required for industrial use. In this study, the MZ optical waveguides have been fabricated in a poly-dimethyl-siloxane (PDMS) thin film which has the higher optical permeability. The PDMS films were spin-coated on a silicon wafer (40 
20 0.5 mm
) with a thickness of approximately 30 
m. The MZ waveguides were drawn by a 750 keV proton microbeam of 1m in diameter having the penetration depth of 18 m with fluence of 40-100 nC/mm
. The beam writing was carried out combining an electric scanner and a mechanical sample-stage. The observation of the single-mode light propagation of 1.55 m fiber-laser in the MZ waveguides indicated that the optical transmittance have been successfully enhanced using PDMS.
加藤 尊秋*; 高原 省五; 西川 雅史*; 本間 俊充
Energy Policy, 59, p.808 - 818, 2013/08
被引用回数：26 パーセンタイル：78.34(Economics)本研究では、2005年11月,2010年1月,2011年12月に東京電力柏崎刈羽原子力発電所の立地地域(柏崎市及び刈羽村)で行った社会調査をもとに、原子力発電所が地域にもたらす経済的・財政的利点や事故で被害を受ける不安感に関し地域住民の考え方の変化を探る。これらの調査は、同じ設問を含み、比較可能である。特に、東京電力福島第一原子力発電所の事故による影響に着目する。調査期間中、2007年7月には新潟県中越沖地震、2011年3月には東北地方太平洋沖地震が生じ、後者は福島第一原子力発電所の事故をもたらした。2011年調査では、2010年調査に比べ、各種の経済的・財政的利点の意義、またこれらの利点によって発電所が地域にもたらす問題点の埋め合わせが可能かという問いに関し、多くで否定的な回答が増えた。ただし、財政的利点の1人あたり規模が極めて大きい刈羽村では、その変化の程度は限定的であり、否定的な回答が増えた項目であっても2005年調査時の水準と大差がなかった(2010年調査では、2005年調査に比べて全体的に上記項目に肯定的な回答が増えていた)。
大道 正明*; 高野 勝昌*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; 加田 渉; 杉本 雅樹; 西川 宏之*; et al.
Journal of Nanoscience and Nanotechnology, 12, p.7401 - 7404, 2012/09
被引用回数：2 パーセンタイル：11.57(Chemistry, Multidisciplinary)A new visualization method for dose distribution of a focused proton beam in sub-micrometer scale was developed using a formation of a bulky cross-linked structure of polyacrylic acid -
, '-methylence bisacrylamide, blend film. The areas irradiated by the focused proton beam were swelled on the film. The height of the swelling was significantly increased according to the beam fluence and the increase of containing ratio of the methylence bisacrylamide. The height was saturated at the fluence of 510
ions/m
. The proton beam-sensitive polymer film was used for the analysis of dose distribution on its surface. The irradiated surface was observed by employing an atomic force microscope. This observation result showed that the method could be used to confirm the writing patterns and the beam-spot shape. Nanostructures with a crescent shape are visualized clearly at a misaligned beam-spot shape in the set up of the beam-optics.
高野 勝昌*; 麻野 敦資*; 前吉 雄太*; 丸井 裕美*; 大道 正明*; 佐伯 昭紀*; 関 修平*; 佐藤 隆博; 石井 保行; 神谷 富裕; et al.
Journal of Photopolymer Science and Technology, 25(1), p.43 - 46, 2012/07
被引用回数：2 パーセンタイル：6.57(Polymer Science)The proton beam writing (PBW) with energy of several MeV ranges is a unique tool of three-dimensional microprocessing for a polymer material. Three-dimensional structures like a bridge structure can be fabricated by the double exposures of PBW with two deferent energies followed by the one-time development using etching solution. In this study, the fabrication of an arched bridge was attempted by means of the supercritical drying with liquid carbon dioxide to a SU-8 photoresist film, as the polymer material, coated on a substrate of epoxy sheet, after the PBW process. In the exposures, two patterns of bridge girders and piers were written with 0.5 and 3 MeV proton beams to the SU-8 photoresist films, respectively. After these writings, the photoresist films were developed with the solution of diacetone alcohol and rinsed with the solution of isopropyl alcohol. Then the supercritical drying with liquid carbon dioxide was used at 12 MPa, 40
C. As the results, the bridge structures with curved girders to the vertical direction were formed due to the swelling effect of the photoresist film on the drying. In the conference, the microprocessing method of the bridge structure and the swelling effect of the photoresist film will be represented in detail.
高野 勝昌*; 杉本 雅樹; 麻野 敦資*; 前吉 雄太*; 丸井 裕美*; 大道 正明*; 佐伯 昭紀*; 関 修平*; 佐藤 隆博; 石井 保行; et al.
Transactions of the Materials Research Society of Japan, 37(2), p.237 - 240, 2012/06
A three dimensional microfabrication technique for polymer films has been investigated on the basis of fabricating micrometer structures composed of the fine wire structures which were fabricated by the chemical reaction induced along ion tracks of heavy ions with the energy of hundred MeV. In this study, we propose a new hemispherical microfabrication technique of epoxy resin for the fabrication of optical lenses using two times irradiation technique combining proton beam writing and low fluence irradiation of heavy ion beam. At first, an epoxy resin films composed of an etching and a non-etching layers of epoxy resin were irradiated at a frame pattern using a 3 MeV focused proton beam. At second, the low fluence irradiation of 450 MeV 
Xe
was performed by a raster line scanning with oblique angle of 45 degree. Finally, the non-irradiated area of the etching layer of the films were etched by the developer. The observation of the etched films showed that the dome-like structures arrayed with a grid were formed on the non-etching layer of the epoxy resin films. The more detailed observation showed that each dome was composed of the fine wire structures formed by cross-linking reactions induced along the Xe tracks. The domes are expected to function as optical condenser-lenses.
前吉 雄太*; 高野 勝昌*; 麻野 敦資*; 丸井 裕美*; 大道 正明*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; et al.
Japanese Journal of Applied Physics, 51(4R), p.045201_1 - 045201_4, 2012/04
被引用回数：1 パーセンタイル：4.43(Physics, Applied)A relation between the fluence and the beam-induced chemical reaction in poly(9,9'-dioctylfluorene), PFO, films has been investigated to fabricate PFO-based nano-micro structures using Proton Beam Writing, PBW. In this investigation, we observed that the cross-linking reaction in PFO occurred without a cross-linking agent using PBW. Furthermore, not only the surface morphology but also structure and shape on PFO films were changed from nano-meter to micro-meter size by controlling the fluence of proton beam irradiation on the basis of the investigation. Consequently, the structure of the arabic numbers was successful fabricated as three-dimensional PFO structures with the aspect ratio of 12 at the fluence of 3.5 10
ions/m by PBW.
SO
/HNO
mixed solutionLi, Z.*; 豊嶋 厚史; 浅井 雅人; 塚田 和明; 佐藤 哲也; 佐藤 望; 菊池 貴宏; 永目 諭一郎; Sch
del, M.; Pershina, V.*; et al.
Radiochimica Acta, 100(3), p.157 - 164, 2012/03
被引用回数：13 パーセンタイル：69.01(Chemistry, Inorganic & Nuclear)The cation-exchange behavior of 
Rf (
= 78 s) produced in the 
Cm(
O, 5
) reaction was studied on a one-atom-at-a-time scale in 0.15-0.69 M HSO/HNO mixed solutions ([H
] = 1.0 M) using an automated ion-exchange separation apparatus coupled with the detection system for alpha-spectroscopy (AIDA). It was found that adsorption probabilities (
ads) of Rf on cation-exchange resin decrease with an increase of [HSO
], showing a successive formation of Rf sulfate complexes. Rf exhibits a weaker complex formation tendency compared to the lighter homologues Zr and Hf. This is in good agreement with theoretical predictions including relativistic effects.
高野 勝昌*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; 加田 渉; 杉本 雅樹; 関 修平*; 西川 宏之*
JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 162, 2012/01
A unique micro-processing technique for epoxy resin films has been developed at the TIARA, utilizing the ion beam writing with multiple energies of light and heavy ion beams. In this study, nano-wire structure fabrication was tried by a superimposing with the proton beams and 520 MeV 
Ar
. And in order to reduce the surface tension in developing and drying processes, after a baking at 95 C for 1 minute, developing and drying was performed with super-critical CO at 12 MPa, 40 C. As the result, the bridge structure which strung the wires fabricated by 520 MeV Ar hitting can be observed at the aimed points.
m band using focused proton beam三浦 健太*; 町田 裕貴*; 上原 政人*; 桐生 弘武*; 小澤 優介*; 佐々木 友之*; 花泉 修*; 佐藤 隆博; 石井 保行; 江夏 昌志; et al.
Key Engineering Materials, 497, p.147 - 150, 2012/00
被引用回数：7 パーセンタイル：95.12(Engineering, Electrical & Electronic)Proton beam writing (PBW) is an attractive technique for next-generation micro-fabrication. We study the fabrication of optical waveguides of polymer materials using PBW. In this study, the optical waveguides of photorefractive polysilane "GLASSIA" was fabricated. The samples for the waveguides were prepared as follows; (1) An under-cladding layer of SiO
having a thickness of 
15 m was deposited on a Si substrate using radio-frequency sputtering. (2) A polysilane layer having a thickness of 10 m was spin-coated onto the SiO layer as a core layer. Optical waveguides were drawn by scanning a 1.7 MeV focused proton beam with 1 m size and beam current of 50 pA which was produced by a submicron focused ion beam system connected with the 3 MV single-ended accelerator at JAEA. The drawing was carried out on the dose of 100, 200, 300 nC/mm each. After the drawing, the sample surfaces were observed using an optical microscope and AFM. The observation result showed that the refractive index was changed and the cores of the waveguides were formed. We will report the details of above observation results in the conference. The change ratio of the refraction index will also be reported on the basis of the obtained result by inserting light (
= 1.55 m) into the waveguide structure through a single-mode fiber.
m band using focused proton beam三浦 健太*; 町田 裕貴*; 上原 政人*; 桐生 弘武*; 小澤 優介*; 佐々木 友之*; 花泉 修*; 佐藤 隆博; 石井 保行; 江夏 昌志; et al.
Key Engineering Materials, 497, p.147 - 150, 2011/12
被引用回数：6 パーセンタイル：2.48Single mode straight waveguides for a wavelength of 1.55-m were, so far, fabricated using a proton beam writing (PBW) technique. We report the fabrication of Y-junction polymer waveguides with a polymethyl methacralate (PMMA) layers as the expansion of these straight waveguides using PBW in the conference. The PMMA layers consisted of an under-cladding layer of SiO having a thickness of 15-m deposited on an Si substrate, a PMMA layer having a thickness of 10-m spin-coated onto the SiO layer and a Y-junction waveguide with a width of 8-m in a PMMA core layer. The Y-junction waveguides with the angle of 2 were drawn using the 1.7 MeV proton beam with 1-m in diameter and a beam current of 10 pA for a dose of 100 nC/mm. After spin-coating the PMMA layer with 10-m thickness as an upper cladding on the irradiated PMMA layer, the near field pattern (NFP) of an 8-m-width Y-junction waveguide was observed using a tunable-wavelength laser. The observation showed that the fabrication of waveguide was succeeded because its waveguide was single mode and the intensity ratio between the two outputted lights was the almost same; 1:0.96. We also briefly report the next plans of the measurement of the refractive indices of proton-irradiated PMMA and SiO films and the fabrication of a thermo-optic polymer switch based on a Mach-Zehnder interferometer waveguide.
高野 勝昌; 佐藤 隆博; 石井 保行; 江夏 昌志; 神谷 富裕; 大久保 猛; 杉本 雅樹; 西川 宏之*; 関 修平*
Transactions of the Materials Research Society of Japan, 36(3), p.305 - 308, 2011/09
Techniques of superimposed ion beam writing with different energies and species have been developed with targeting system at Takasaki Ion Accelerators for Advanced Radiation Application facility, TIARA, of JAEA/Takasaki. A bridge structure was fabricated by the superimposed writing of a girder pattern with 0.5 MeV proton beam adjusting to the bridge pier pattern written with 3 MeV proton beam, using SU-8 photoresist films coated on curing epoxy resin sheets. An upstanding column array with the diameter of sub-micron supported by the bridge structure was fabricated by the spot writing of 260 MeV Ne
single ion hit adjusting to the girder pattern written with the 0.5 MeV proton beams.
徐 陽; 田川 明広; 上田 雅司; 山下 卓哉; Otsuka, Yusuke*; Osafune, Kazunori*; 西川 雅弘*
3rd International Conference on Non-destructive Te, 0 Pages, 2003/11
None
m帯用PMMA導波路の試作三浦 健太*; 町田 裕貴*; 上原 政人*; 花泉 修*; 石井 保行; 佐藤 隆博; 高野 勝昌; 大久保 猛; 山崎 明義; 井上 愛知; et al.
no journal, ,
プロトンビーム描画(Proton Beam Writing: PBW)は、次世代の微細加工技術として注目されているが、PMMAへのプロトン照射による屈折率向上効果を利用することによって、光導波路形成への応用も可能である。今回われわれは、PBWを利用したPMMA導波路を提案し、813mで、長さ10mm程度の直線導波路を6種類試作した。波長1.55mで伝搬長6mmの光を導波路に導入し導波路の状態を評価した。試作した導波路のうち幅8mのもので、波長1.55mの光伝搬(シングルモード)を確認でき、光導波路として良好であることもわかった。発表では光導波路の構造,製作方法、及び観察結果について報告する。
町田 裕貴*; 上原 政人*; 三浦 健太*; 花泉 修*; 石井 保行; 佐藤 隆博; 高野 勝昌; 大久保 猛; 山崎 明義; 井上 愛知; et al.
no journal, ,
Development of a polymer optical switch using planer polymer waveguides has been recently of importance in the field of optical fiber communication in order to reduce the size of an optical switch and optical loss in a waveguide. The straight planer polymer waveguides with core sizes from 2 to 16 m in the interval of 2 m were fabricated by irradiating the PMMA films using Proton Beam Writing (PBW) with 1.7 MeV proton beam of about 1 m in diameter as a preliminary study. The observation of the near-field patterns using a vidicon camera showed that the straight waveguides with core sizes of 10 m or less worked as a single-mode waveguides of 1550 nm. We report the fabrication method of the planer polymer waveguides of irradiating straight lines using PBW in PMMA films spin-coated on a Si substrate covered with SiO in the conference. The results of the fabrication of the straight polymer waveguides and the observation of near-field patterns are also explained in the symposium. In the next studies, a thermo-optic polymer switch based on a Mach-Zehnder interferometer waveguide will be fabricated after the measurements of the refractive indices of proton-irradiated PMMA films and SiO layers.
m帯用シングルモードPMMA導波路三浦 健太*; 町田 裕貴*; 上原 政人*; 花泉 修*; 石井 保行; 佐藤 隆博; 高野 勝昌; 大久保 猛; 山崎 明義; 井上 愛知; et al.
no journal, ,
プロトンビーム描画(Proton Beam Writing: PBW)は、近年、次世代の微細加工技術として注目されているが、その一方で、新たな光導波路描画技術としても知られている。これまでにPMMAへのプロトン照射による屈折率向上効果を利用することによって、マスクレスでPMMA導波路を直接描画する試みが報告されており、可視波長(632.8nm)でシングルモードとなるチャネル導波路も試作されている。しかしながら、これまで、この手法では、光通信波長帯(波長1.5m帯など)での動作を目指した検討は行われていなかった。そこでわれわれは、PMMA薄膜へのPBWによる直接描画による、波長1.5m帯用の光導波路デバイスの実現を目指している。今回われわれは、PBWを利用したPMMA導波路として、新たに提案,試作し、長さ10mm程度の直線導波路を作製,評価したところ、波長1.55mの光伝搬(シングルモード)を確認できたので、報告する。
m帯用PMMA導波路の試作,2三浦 健太*; 町田 裕貴*; 上原 政人*; 花泉 修*; 石井 保行; 佐藤 隆博; 高野 勝昌; 大久保 猛; 山崎 明義; 井上 愛知; et al.
no journal, ,
本研究は集束プロトンビーム描画(Proton Beam Writin、PBW)を用いてPMMAの照射部の改質を行うことで、小型かつ、省出力で動作する光スイッチの製作を目的としている。これまでに、PBWを用いてPMMAの導波路を試作し、波長1.55mにおけるシングルモード伝搬を初めて実証した。今回コア幅を416mの範囲で変えた複数のPMMA直線導波路を同一基板上に作製し、シングルモードとマルチモードの境界になる幅を実験から特定することによって、この導波路構造におけるシングルモード条件を明らかにしたので報告する。具体的にはコア幅を、416mの範囲で2m刻み(設定値)で変えた導波路の製作と、波長1.55mにおける幅8mの導波路の近視野像(基本モード)及び幅10mの導波路の近視野像(高次モード)の観察結果を示す。この結果から、PMMA導波路がシングルモードとなる幅の最大値は、810mの範囲であることがわかった。発表ではこれに加えて、これらの導波路の伝搬損失の評価やコア層の厚さの最適化に関しても言及する。
SO/HNO mixed solution ([H] = 1.0 M)Li, Z.; 豊嶋 厚史; 浅井 雅人; 塚田 和明; 佐藤 哲也; 佐藤 望; 菊池 貴宏; Schdel, M.*; 永目 諭一郎; Liang, X. H.*; et al.
no journal, ,
本研究では、HSO (0.15-0.69 M)/HNO ([H] = 1.0 M)混合水溶液中における104番元素Rfの硫酸錯体形成を明らかにした。Cm(O, 5n)反応によりRf (半減期T
= 78 s)を合成し、ガスジェット法により化学室に搬送した後に自動化学分離装置を用いてその陽イオン交換挙動を調べた。その結果、Rfの硫酸錯体形成は軽同族元素のZr並びにHfに比べ著しく弱いことが明らかになった。この結果は相対論計算による理論的予測と定性的に一致している。
SO/HNO mixed solution ([H] = 1.0 M)Li, Z.; 豊嶋 厚史; 浅井 雅人; 塚田 和明; 佐藤 哲也; 佐藤 望; Schdel, M.*; 永目 諭一郎; Liang, X. H.*; 笠松 良崇*; et al.
no journal, ,
本研究ではHSO (0.15-0.69)/HNO ([H] = 1.0 M)混合水溶液中における104番元素Rfの硫酸錯体形成を明らかにした。Cm(O,5n)反応によりRfを合成し、ガスジェット法により化学室に搬送した後に自動化学分離装置を用いてその陽イオン交換挙動を調べた。その結果、Rfの硫酸錯体形成は軽同族元素のZr並びにHfに比べ著しく弱いことが明らかになった。この結果は相対論計算による理論的予測と定性的に一致している。
三浦 健太*; 佐藤 隆博; 江夏 昌志; 石井 保行; 高野 勝昌; 加田 渉; 山崎 明義; 横山 彰人; 神谷 富裕; 上原 政人*; et al.
no journal, ,
高信頼性、かつ低価格の光スイッチとして、マッハツェンダー干渉計(Mach-Zehnder Interferometer: MZI)型熱光学スイッチが期待されている。本研究では有機材料のPMMAにプロトンビーム描画(Proton Beam Writing: PBW)を用いて光導波路を製作することで、このスイッチの開発を行っている。今回、Si基板の上に三層構造、すなわちSiO層,PMMAコア層及びPMMAクラッド層を持つ試料を製作し、これにPBWを用いて直線導波路を製作した。この直線導波路の近視野像の観察結果からシングルモードとなるコアサイズを特定した。さらにこの結果をもとに同じ三層構造の試料を用いてMZIの基本要素であるY分岐導波路を試作し、近視野像の観察から波長1.55mにおいてシングルモードを観察した。本研究会ではこれらの研究開発に関しての発表を行うとともに、今回の成果を発展させたMZI型光スイッチに関しても言及する。
